visibility Similar

Orion EM-1 LH Forward Skirt Arrival and Offload

Expedition 9 Soyuz Rollout. NASA public domain image colelction.

Expedition 40 Preflight. NASA public domain image colelction.

CAPE CANAVERAL, Fla. – Inside the Rotation, Processing and Surge Facility, or RPSF, at the Kennedy Space Center in Florida, an overhead crane lifts NASA locomotive No. 3 off of its trucks to be moved into position atop the trucks previously used by locomotive No. 2. The RPSF was built to support work on the solid rocket used motors during the space shuttle era. The facility had never previously been used for another purpose, but is now free to serve other customers. With rails running into the building's high bay and a pair of heavy-lift cranes positioned overhead, the facility's capabilities were a perfect fit for the NASA Railroad's needs. Railroad managers wanted to trade the wheel and axle assemblies, or trucks, of locomotives No. 2 and No. 3. Locomotive No. 3 was painstakingly restored in recent years by the NASA Railroad team, and handles much of the rail work required at the center in the post-shuttle era. But the trucks on locomotive No. 2 are in better shape and are more environmentally friendly. For more information, visit: http://www.nasa.gov/exploration/systems/ground/rpsf_locomotives.html Photo credit: NASA/Jim Grossmann KSC-2012-6343

HUA-171588-Afbeelding van de overslag van containers op de Container Terminal Amsterdam in de Westhaven te Amsterdam

VANDENBERG AIR FORCE BASE, Calif. – After arrival of the Stage 0 motor for the Taurus XL launch vehicle at Vandenberg Air Force Base in California, a crane lifts off the protective cage. The motor will be transported to Orbital Sciences' Hangar 1555. The Taurus XL will launch NASA's Orbiting Carbon Observatory, or OCO, spacecraft targeted for Jan. 15. The OCO is a new Earth-orbiting mission sponsored by NASA's Earth System Science Pathfinder Program. Photo credit: NASA/Randy Beaudoin, VAFB KSC-08pd3535

Expedition 51 Rollout. NASA public domain image colelction.

Icing Research Tunnel (IRT) "AB Corner" Rehabilitation

Expedition 44 Rollout (201507200012HQ)

code Related

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 continues its trek along the crawlerway to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper KSC-2013-4207

CAPE CANAVERAL, Fla. – Ground support equipment technicians prepare to remove the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3708

CAPE CANAVERAL, Fla. – Preparations are underway to begin removing the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3707

CAPE CANAVERAL, Fla. – Ground support equipment technicians monitor the progress as a crane is used to lift and move a new jacking, equalizing and leveling, or JEL, hydraulic cylinder for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3842

CAPE CANAVERAL, Fla. – Ground support equipment technicians monitor the progress as one of the jacking, equalizing and leveling, or JEL, hydraulic cylinders is lifted from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3711

CAPE CANAVERAL, Fla. – Preparations are underway to begin removing the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3706

CAPE CANAVERAL, Fla. -- Crawler-transporter 1 approaches the top of Launch Pad 39A after traveling along the crawlerway at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are undergoing a leveling and turning test as the crawler travels along the slope to the top of the pad. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-4213

CAPE CANAVERAL, Fla. – Ground support equipment technicians assist as a crane moves a new jacking, equalizing and leveling, or JEL, hydraulic cylinder close for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3845

CAPE CANAVERAL, Fla. – Ground support equipment technicians assist as a crane is used to move a new jacking, equalizing and leveling, or JEL, hydraulic cylinder closer for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3843

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 begins its trek to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Vehicle Assembly Building is visible in the background. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper KSC-2013-4203

description

Summary

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 begins its trek to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Vehicle Assembly Building is visible in the background. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper

The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.

label_outline

Tags

ct 1 crawler sls pad a jel kennedy space center cape canaveral ground support equipment technicians progress crawler transporter trek launch pad nasa kennedy space center new jel cylinders ct load capacity reliability vehicle development ground systems development program operations program maintenance variety vehicles two crawler transporters launcher platform launcher platform space shuttle launch complex daniel casper high resolution nasa
date_range

Date

1960 - 1969
collections

in collections

Space Shuttle Program
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Ct 1 Crawler Sls Pad A Jel, Two Crawler Transporters, Jel

CAPE CANAVERAL, Fla. -- Technicians in the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, are jacking crawler-transporter 2, or CT-2, four feet off the floor to facilitate removal of the roller bearing assemblies. After inspections, new assemblies will be installed. The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades to CT-2 so that it can carry NASA’s Space Launch System heavy-lift rocket and new Orion spacecraft to the launch pad. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B. Photo credit: NASA/Charisse Nahser KSC-2013-1930

A M35A2 2 1/2-ton cargo truck pulls a support vehicle up the starboard loading ramp of the United States Naval Ship (USNS) Gordon. USNS Gordon is the first United States Navy (USN) Large, Medium-Speed Roll-on/Roll-off Ships, or LMSR, cargo vessel. USNS Gordon is a former commercial tanker and underwent conversion to United States Navy Military Sealift Command specifications to make it ideal for the loading, transport and unloading of United States Army and United States Marine Corps combat equipment. It is more than 300 yards long and has a storage capacity of more than 300,000 square feet. The ship is named in honor of MASTER Sergeant Gary I. Gordon, US Army, who was posthumously...

Electrician's Mate 2nd Class Winston Trinidad sets the electrical plant control console for maximum engineering reliability in central control station.

THERMAL GRADIENT RIG CERAMIC MATRIX COMPOSITE CYLINDERS GRC-1999-C-02417

A close up of a car engine on display. Engine automobile cylinders.

Trophies that will be awarded to the winning teams during Sabre Spirit I, a munitions loading competition between teams from all the tactical units within the Fifth Air Force. The loading competition will be judge for safely, reliability, compliance with technical data, condition of tools and equipment and speed of loading

Conversion. Beverage containers to aviation oxygen cylinders. After they are stamped on the huge toggle press in the metal division of a large rubber factory, these cylindrical domes which make up half of a shatterproof oxygen cylinder, are placed on a large conveyor where they are carried to workmen who will apply the circumferential and longitudinal straps. Cylinders are used for high altitude flying as a source of oxygen. Firestone, Akron, Ohio

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 continues its trek along the crawlerway to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper KSC-2013-4207

KENNEDY SPACE CENTER, FLA. -- Installed on a transporter, the payload canister moves out of the Vertical Processing Facility. Inside the canister are the SPACEHAB module and the port 5 truss segment for mission STS-116. They will be moved into the payload changeout room at the pad and transferred into Space Shuttle Discovery's payload bay once the vehicle has rolled out to the pad. The payload canister is 65 feet long, 18 feet wide and 18 feet, 7 inches high. It has the capability to carry vertically or horizontally processed payloads up to 15 feet in diameter and 60 feet long, matching the capacity of the orbiter payload bay. It can carry payloads weighing up to 65,000 pounds. Clamshell-shaped doors at the top of the canister operate like the orbiter payload bay doors, with the same allowable clearances. Photo credit: NASA/George Shelton KSC-06pd2451

CAPE CANAVERAL, Fla. –– Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, a crane is used to lift an Apollo era diesel engine away from crawler-transporter 2 CT-2). New engines will be installed later this month. Work is in progress in high bay 2 to upgrade CT-2 so that it can carry NASA’s Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Kim Shiflett KSC-2012-1349

A right side view of an Air Force A/S32P-15 large capacity firefighting vehicle

NTS - Cylinders 2 - A rusted metal tank sitting on top of a dry grass covered field

Topics

ct 1 crawler sls pad a jel kennedy space center cape canaveral ground support equipment technicians progress crawler transporter trek launch pad nasa kennedy space center new jel cylinders ct load capacity reliability vehicle development ground systems development program operations program maintenance variety vehicles two crawler transporters launcher platform launcher platform space shuttle launch complex daniel casper high resolution nasa