visibility Similar

Expedition 19 Soyuz Rollout. NASA public domain image colelction.

Supplies are craned onto the Wasp Class Amphibious Assault Ship USS BONHOMME RICHARD (LHD 6) during a brief port visit to the Pacific island of Guam. The BONHOMME RICHARD promptly changed her deployment schedule to support Operation UNIFIED ASSISTANCE, the humanitarian relief effort in the wake of the Tsunami that struck South East Asia on December 26 2004

Damage Controlman 3rd Class Reginald Rose observes Damage Controlman Fireman Eugene Reyna as he goes through the list of procedures

Columbiana County Port Authority, Wellsville Intermodal Facility Wellsville, Ohio USA. Ares 1-X

Aviation Boatswain's Mate (Equipment) Airman J. O. Mujica raises an arresting gear engine to perform maintenance.

CAPE CANAVERAL, Fla. – At Launch Pad 39A at NASA’s Kennedy Space Center in Florida, technicians prepare for the final release of the seven slidewire baskets from the 195-foot level. After the baskets reach the ground they will be removed and put in storage. The system of seven slidewire baskets at launch pads A and B provided an escape route for personnel inside the orbiter or on the orbiter access arm. The baskets are suspended from slidewires that extend from the pad’s Fixed Service Structure to a landing zone 1,200 feet to the west. Each basket could hold up to three people. A braking system catch net and drag chain slowed and then halted the baskets sliding down the wire approximately 55 miles per hour in about half a minute. Photo credit: NASA/Frankie Martin KSC-2012-1810

[Dunkirk], Marshall plan, post-war reconstruction of Europe

A Kuwaiti worker refills the water tanks of a showering facility for the 7th Marine Regiment at Camp Coyote, Kuwait, during Operation ENDURING FREEDOM

150826-N-MQ094-146 ATLANTIC OCEAN (Aug. 26, 2015) Aviation

code Related

CAPE CANAVERAL, Fla. – Ground support equipment technicians prepare to remove the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3708

CAPE CANAVERAL, Fla. – Preparations are underway to begin removing the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3707

CAPE CANAVERAL, Fla. – Preparations are underway to begin removing the jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3706

CAPE CANAVERAL, Fla. – Ground support equipment technicians prepare one of the jacking, equalizing and leveling, or JEL, hydraulic cylinders for removal from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3709

CAPE CANAVERAL, Fla. – Ground support equipment technicians review procedures before removing jacking, equalizing and leveling, or JEL, hydraulic cylinders from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3704

CAPE CANAVERAL, Fla. – Ground support equipment technicians monitor the progress as a crane is used to lift and move a new jacking, equalizing and leveling, or JEL, hydraulic cylinder for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3842

CAPE CANAVERAL, Fla. – Ground support equipment technicians assist as a crane is used to move a new jacking, equalizing and leveling, or JEL, hydraulic cylinder closer for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3843

CAPE CANAVERAL, Fla. – Ground support equipment technicians assist as one of the jacking, equalizing and leveling, or JEL, hydraulic cylinders is lowered to the ground after it was removed from crawler-transporter 1. The work is being performed at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3714

CAPE CANAVERAL, Fla. – Ground support equipment technicians assist as a crane moves a new jacking, equalizing and leveling, or JEL, hydraulic cylinder close for installation on crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. New JEL hydraulic cylinders will be installed on CT-1 to test them for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Jim Grossmann KSC-2013-3845

CAPE CANAVERAL, Fla. – Ground support equipment technicians monitor the progress as one of the jacking, equalizing and leveling, or JEL, hydraulic cylinders is lifted from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs KSC-2013-3711

description

Summary

CAPE CANAVERAL, Fla. – Ground support equipment technicians monitor the progress as one of the jacking, equalizing and leveling, or JEL, hydraulic cylinders is lifted from crawler-transporter 1 at the crawler transporter maintenance facility at NASA’s Kennedy Space Center in Florida. Sixteen new JEL hydraulic cylinders will be installed on CT-1 to increase load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade CT-1 as part of its general maintenance. CT-1 could be available to carry commercial launch vehicles to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Tim Jacobs

The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.

Nothing Found.

label_outline

Tags

crawler ct 1 apollo era space shuttle kennedy space center cape canaveral ground support equipment technicians ground support equipment technicians progress jel cylinders crawler transporter crawler transporter maintenance crawler transporter maintenance facility nasa kennedy space center ct increase load increase load capacity reliability development ground systems development program operations program vehicles launch pad launcher platform launcher platform space shuttle launch complex tim jacobs high resolution nasa
date_range

Date

1960 - 1969
collections

in collections

Space Shuttle Program
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Crawler Ct 1 Apollo Era Space Shuttle, Increase Load, Ground Support Equipment Technicians

War production drive. The war production drive committee in the Westinghouse Electric and Manufacturing Company plant in Cleveland approved this pledge card. The signing of each card impressed the worker with his individual responsibility for the success of the drive. Many other plants have used similar pledges and many plants forward these signed pledges to Donald M. Nelson, Chairman of the War Production Board (WPB), as a gesture of their commitment to increase production

Electrician's Mate 2nd Class Winston Trinidad sets the electrical plant control console for maximum engineering reliability in central control station.

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 begins its trek to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Vehicle Assembly Building is visible in the background. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper KSC-2013-4203

A close up of a car engine on display. Engine automobile cylinders.

Conversion. Beverage containers to aviation oxygen cylinders. After they are stamped on the huge toggle press in the metal division of a large rubber factory, these cylindrical domes which make up half of a shatterproof oxygen cylinder, are placed on a large conveyor where they are carried to workmen who will apply the circumferential and longitudinal straps. Cylinders are used for high altitude flying as a source of oxygen. Firestone, Akron, Ohio

CAPE CANAVERAL, Fla. -- Ground support equipment technicians monitor the progress as crawler-transporter 1 continues its trek along the crawlerway to Launch Pad 39A at NASA’s Kennedy Space Center in Florida. New jacking, equalizing and leveling, or JEL, hydraulic cylinders were installed on CT-1 and are being tested for increased load carrying capacity and reliability. The Ground Systems Development and Operations Program at Kennedy continues to upgrade the crawler-transporter as part of its general maintenance. CT-1 could be available to carry a variety of launch vehicles to the launch pad. Two crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Daniel Casper KSC-2013-4207

CHIEF Boatswain's Mate George Bryant supervises as a Naval Reserve sailor lowers a side-scanning sonar "tow fish" into the water from the stern of the craft-of-opportunity program (COOP) trainer CT-11. COOP trainers are converted small craft equipped with gear that allows them to survey harbor bottoms and detect mines

CAPE CANAVERAL, Fla. –– Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, a crane is used to lift an Apollo era diesel engine away from crawler-transporter 2 CT-2). New engines will be installed later this month. Work is in progress in high bay 2 to upgrade CT-2 so that it can carry NASA’s Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Kim Shiflett KSC-2012-1349

SPECIALIST (SPC) Jomo Banks, USA, 306th Engineer Company, Amityville, New York, uses a skill saw to cut a board for one of four shower tents. Each tent will contain twelve showerheads, adding 48 new showers to the twelve already in place. An increase shower capacity of 400 percent for the 3,000 troops stationed at Kandahar Air Base, during Operation ENDURING FREEDOM

CAPE CANAVERAL, Fla. –– Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a crane lifts an Apollo era diesel engine from crawler-transporter 2 CT-2). New engines will be installed later this month. Work is in progress in high bay 2 to upgrade CT-2 so that it can carry NASA’s Space Launch System heavy-lift rocket, which is under design, and new Orion spacecraft to the launch pad. The crawler-transporters were used to carry the mobile launcher platform and space shuttle to Launch Complex 39 for space shuttle launches for 30 years. Photo credit: NASA/Kim Shiflett KSC-2012-1347

Members from Explosive Ordnance Disposal Team Two, Detachment 40 (EOD-2, Detachment 40) at work aboard the amphibious transport dock USS NASHVILLE (LPD 13) during exercises conducted by Mine Countermeasures Task Group 1-81 (MCMTG 1-81). The task group, consisting of navy units from seven NATO countries, was formed to increase their mine countermeasures capabilities

Conversion. Beverage containers to aviation oxygen cylinders. The first step in the manufacture of high-altitude-flying shatterproof oxygen cylinders in the metal department of a large rubber factory is the forming or stamping of the shell. Stainless steel sheets are blanked or cut into discs(left foreground). Before stamping, these discs are drawn through rolls where a drawing compound is added to both sides to facilitate the forming of the shell. The 750-ton toggle press, shown above, forms a half cylinder in one powerful stroke. Once the half cylinder is formed, it is trimmed and the value-fitting hole is punched into the spherical dome. A cleaning operation later removes the drawing compound. The cylinder halves are now ready for the various welding operations. Firestone, Akron, Ohio

Topics

crawler ct 1 apollo era space shuttle kennedy space center cape canaveral ground support equipment technicians ground support equipment technicians progress jel cylinders crawler transporter crawler transporter maintenance crawler transporter maintenance facility nasa kennedy space center ct increase load increase load capacity reliability development ground systems development program operations program vehicles launch pad launcher platform launcher platform space shuttle launch complex tim jacobs high resolution nasa