Similar
KENNEDY SPACE CENTER, FLA. -- The overhead sling lowers the orbiter Atlantis next to the external tank and solid rocket boosters stacked on the mobile launcher platform (MLP) below. Atlantis will be mated to the MLP as well. Space Shuttle Atlantis is targeted to roll out to Launch Pad 39A on February 14 for mission STS-117. The mission is No. 21 to the International Space Station and construction flight 13A. Photo credit: NASA/Amanda Diller KSC-07pd0333
CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-1 at NASA’s Kennedy Space Center in Florida, one of the two payload bay doors on space shuttle Atlantis is closed in preparation for its move to the Vehicle Assembly Building. The work is part of the Space Shuttle Program’s transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis’ future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex in November in preparation for the exhibit’s grand opening in July 2013. For more information, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Dimitri Gerondidakis KSC-2012-3481
CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, doors begin to close around the Raffaello multi-purpose logistics module after it was secured in the payload canister. A special payload removal device was used to remove it from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6155
CAPE CANAVERAL, Fla. - In high bay 1 of the Vehicle Assembly Building at NASA’s Kennedy Space Center, space shuttle Endeavour is lowered alongside its external fuel tank and solid rocket boosters for mating. After additional preparations are made, the shuttle will be rolled out to Launch Pad 39B. Endeavour is designated the rescue spacecraft for space shuttle Atlantis’ STS-125 mission to NASA’s Hubble Space Telescope, targeted for October. After Atlantis has safely returned from its flight, Endeavour will be moved to Launch Pad 39A for its STS-126 mission to the International Space Station, targeted for November. Photo credit: NASA/Kim Shiflett KSC-08pd2616
HAMPTON, Va. – At the Naval Station Norfolk near NASA’s Langley Research Center in Virginia, the Orion boilerplate test article is reflected in water on a U.S. Navy ship. The test article and support equipment for a stationary recovery test were transferred to the ship from a floating dock system. NASA and the U.S. Navy are conducting tests to prepare for recovery of the Orion crew module and forward bay cover on its return from a deep space mission. The stationary recovery test will allow the teams to demonstrate and evaluate the recovery processes, procedures, hardware and personnel in a controlled environment before conducting a second recovery test next year in open waters. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Dimitri Gerondidakis KSC-2013-3293
s124e007434 - STS-124 - Public domain NASA photogrpaph
S123E008109 - STS-123 - Survey view of Bay 16 on the P1 Truss taken during Joint Operations
s133E010908 - STS-133 - Fly around of ISS
KENNEDY SPACE CENTER, FLA. - From this unique view on an upper level of the Vehicle Assembly Building, the solid rocket boosters (SRBs) are seen being stacked for the orbiter Discovery and mission STS-116. Discovery will be rolling over to the VAB in early November to be stacked with the SRBs and external tank for launch. STS-116 will be mission number 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. Launch is scheduled for no earlier than Dec. 7. Photo credit: NASA/Jack Pfaller KSC-06pd2260
Related
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is lowered into high bay 1 of the Vehicle Assembly Building where it will be mated with the solid rocket boosters for mission STS-117. The boosters are already in place on the mobile launcher platform in the VAB. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0139
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is lowered into high bay 1 of the Vehicle Assembly Building where it will be mated with the solid rocket boosters for mission STS-117. The boosters are already in place on the mobile launcher platform in the VAB. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0140
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is lowered into high bay 1 of the Vehicle Assembly Building where it will be mated with the solid rocket boosters for mission STS-117. The boosters are already in place on the mobile launcher platform in the VAB. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0141
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is lowered between the twin solid rocket boosters in high bay 1 of the Vehicle Assembly Building. The tank will be mated with the SRBs, already in place on the mobile launcher platform, for mission STS-117. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0143
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is lowered between the twin solid rocket boosters in high bay 1 of the Vehicle Assembly Building. The tank will be mated with the SRBs, already in place on the mobile launcher platform, for mission STS-117. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0142
KENNEDY SPACE CENTER, FLA. -- In the Vehicle Assembly Building at NASA's Kennedy Space Center, United Space Alliance technicians get ready to lower the external tank to be mated with the solid rocket boosters on the mobile launcher platform. The boosters-tank configuration will be used on space shuttle Atlantis for mission STS-122, which is targeted for launch on Dec. 6. Photo credit: Kim Shiflett KSC-07pd2872
KENNEDY SPACE CENTER, FLA. -- Above the transfer aisle of the Vehicle Assembly Building, external tank No. 125 has been raised to a nearly vertical position. It will next be lifted into a checkout cell in high bay 4 to allow for processing. The tank will be part of the space shuttle stack for mission STS-122 targeted to launch Dec. 6. Photo credit: NASA/Troy Cryder KSC-07pd2476
KENNEDY SPACE CENTER, FLA. - Inside the Vehicle Assembly Building, the external tank is mated to its twin solid rocket boosters on the mobile launch platform in high bay 3 for mission STS-116. The gigantic, rust-colored external tank is the largest element of the Space Shuttle system at 27.6 feet wide and 154 feet tall. STS-116 will be mission No. 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. Launch is scheduled for no earlier than Dec. 7. Photo credit: NASA/Jack Pfaller KSC-06pd2293
KENNEDY SPACE CENTER, FLA. - Inside the Vehicle Assembly Building, workers prepare to transfer the external tank from the checkout cell for attaching to its twin solid rocket boosters on the mobile launch platform in highbay 3 for mission STS-116. The gigantic, rust-colored external tank is the largest element of the Space Shuttle system at 27.6-feet wide and 154-feet tall. STS-116 will be mission no. 20 to the International Space Station and construction flight 12A.1. The mission payload is the SPACEHAB module, the P5 integrated truss structure and other key components. Launch is scheduled for no earlier than Dec. 7. Photo credit: NASA/Jack Pfaller KSC-06pd2285
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is moved from its checkout cell in the Vehicle Assembly Building to high bay 1 where it will be mated with the solid rocket boosters for mission STS-117. The boosters are already in place on the mobile launcher platform in the VAB. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett KSC-07pd0138
Summary
KENNEDY SPACE CENTER, FLA. -- External tank No. 124 is moved from its checkout cell in the Vehicle Assembly Building to high bay 1 where it will be mated with the solid rocket boosters for mission STS-117. The boosters are already in place on the mobile launcher platform in the VAB. The mission is targeted to launch on March 16 aboard Space Shuttle Atlantis. Photo credit: NASA/Kim Shiflett
The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.
Space Shuttle Atlantis was a space shuttle that was operated by NASA as part of the Space Shuttle program. It was the fourth operational shuttle built, and the last one to be built before the program was retired in 2011. Atlantis was named after the first research vessel operated by the Woods Hole Oceanographic Institution, and it made its first flight in October 1985. Over the course of its career, Atlantis completed 33 missions and spent a total of 307 days in space. Its last mission was STS-135, which was the final mission of the Space Shuttle program. Atlantis is now on display at the Kennedy Space Center Visitor Complex in Florida. Space Shuttle Atlantis (Orbiter Vehicle Designation: OV-104) was one of the four first operational orbiters in the Space Shuttle fleet of NASA, the space agency of the United States. (The other two are Discovery and Endeavour.) Atlantis was the fourth operational shuttle built. Atlantis is named after a two-masted sailing ship that operated from 1930 to 1966 for the Woods Hole Oceanographic Institute. Atlantis performed well in 25 years of service, flying 33 missions.
Nothing Found.