Similar
Boswell Bay White Alice Site, Radio Relay Building, Chugach National Forest, Cordova, Valdez-Cordova Census Area, AK
KENNEDY SPACE CENTER, FLA. -- Inside the payload bay of Space Shuttle orbiter Endeavour, workers and STS-88 crew members on a movable work platform or bucket move closer to the rear of the orbiter's crew compartment. While Endeavour is being prepared for flight inside Orbiter Processing Facility Bay 1, the STS-88 crew members are participating in a Crew Equipment Interface Test (CEIT) to familiarize themselves with the orbiter's midbody and crew compartments. A KSC worker (left) maneuvers the platform to give Mission Specialists Jerry L. Ross and James H. Newman (right) a closer look. Looking on is Wayne Wedlake of United Space Alliance at Johnson Space Center. Targeted for liftoff on Dec. 3, 1998, STS-88 will be the first Space Shuttle launch for assembly of the International Space Station (ISS). The primary payload is the Unity connecting module which will be mated to the Russian-built Zarya control module, expected to be already on orbit after a November launch from Russia. After the mating, Ross and Newman are scheduled to perform three spacewalks to connect power, data and utility lines and install exterior equipment. The first major U.S.-built component of ISS, Unity will serve as a connecting passageway to living and working areas of the space station. Unity has two attached pressurized mating adapters (PMAs) and one stowage rack installed inside. PMA-1 provides the permanent connection point between Unity and Zarya; PMA-2 will serve as a Space Shuttle docking port. Zarya is a self-supporting active vehicle, providing propulsive control capability and power during the early assembly stages. It also has fuel storage capability KSC-98pc1216
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-115 crew members inspect equipment in Atlantis's payload bay. From left are Mission Specialists Joseph Tanner and Heidemarie Stefanyshyn-Piper. The crew is at KSC for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The STS-115 mission will deliver the second port truss segment, the P3/P4 truss, to the International Space Station. The crew will attach the P3 to the first port truss segment, the P1 truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1206
Thermal Infrared Sensor (TIRS) INSTRUMENT
KENNEDY SPACE CENTER, FLA. - Technicians attach a crane to the Pump Flow Control Subsystem (PFCS) in the Space Station Processing Facility. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1477
US COAST GUARD AMT Competition U.S. Coast Guard photograph
U.S. Army Chief of Staff Gen. Mark A. Milley visits
HIGH BAY AREA, NASA Technology Images
KENNEDY SPACE CENTER, FLA. -- Workers in the Space Station Processing Facility prepare the part of the U.S. Laboratory Destiny that will bear the NASA logo. Destiny is the key U.S. element of the International Space Station. Launch of mission STS-98 on Space Shuttle Atlantis will carry Destiny to the Space Station with five system racks and experiments already installed inside the module. The launch is scheduled for January 2001 KSC-00pp1928
Related
KENNEDY SPACE CENTER, Fla. -- In the Operations and Checkout Building, during a Crew Equipment Interface Test, members of the STS-110 crew check out Integrated Truss Structure (ITS) S0, which will be part of the payload on their mission. At left is Mission Specialist Jerry L. Ross, with a camera. Standing (center) are Mission Specialists Steven L. Smith and Rex J. Walheim. Other crew members (not shown) are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Missin Specialists Ellen Ochoa and Lee M. Morin. The ITS S0 is part of the payload on the mission. It is the center segment they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in February 2002 KSC-01pp1565
KENNEDY SPACE CENTER, Fla. -- In the Operations and Checkout Building, STS-110 crew members check out Integrated Truss Structure (ITS) S0, which will be part of the payload on the mission. On the left are Mission Specialists Jerry L. Ross and Rex J. Walheim. On the right, standing next to two trainers, is Mission Specialist Lee M. Morin. They and other crew members are taking part in a Crew Equipment Interface Test at KSC. Not shown are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialists Steven L. Smith and Ellen Ochoa. The ITS S0 is part of the payload on the mission. It is the center segment they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in February 2002 KSC-01pp1568
KENNEDY SPACE CENTER, FLA. -- In the Operations and Checkout Building, members of the STS-110 crew check out equipment that will be on their mission. From left are Mission Specialists Steven Smith, Lee Morin, Jerry Ross and Rex Walheim. Other crew members (not shown) are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialist Ellen Ochoa. Part of the payload on the mission is the Integrated Truss Structure S0. It is the center segment that they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in April 2002 KSC-02pd0056
KENNEDY SPACE CENTER, FLA. -- In the Operations and Checkout Building, STS-110 Mission Specialist Lee Morin looks over equipment that will be on the mission. Other crew members (not shown) are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialists Steven L. Smith, Ellen Ochoa and Rex J. Walheim. Part of the payload on the mission is the Integrated Truss Structure S0. It is the center segment that they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in April 2002 KSC-02pd0055
KENNEDY SPACE CENTER, FLA. -- In the Operations and Checkout Building, members of the STS-110 crew take a break from checking equipment to pose for a photo: (from left) Mission Specialists Steven Smith, Rex Walheim, Jerry Ross and Lee Morin. Other crew members (not shown) are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialist Ellen Ochoa. Part of the payload on the mission is the Integrated Truss Structure S0. It is the center segment that they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in April 2002 KSC-02pd0057
KENNEDY SPACE CENTER, FLA. -- Standing underneath the orbiter Atlantis in the Orbiter Processing Facility are STS-110 Commander Michael Bloomfield and Mission Specialists Steven Smith and Rex Walheim. They and other crew members are taking part in Crew Equipment Integration Test activities, which include familiarization with the vehicle and payload. The mission, 13th assembly flight to the International Space Station, includes the Integrated Truss Structure S0. The ITS S0 is the center segment on the Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is scheduled to launch April 4, 2002 KSC-02pd0110
KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-110 crew members look over the payload bay of Atlantis during Crew Equipment Integration Test activities, which include familiarization with the vehicle and payload. From left are Mission Specialist Jerry Ross, a technician, and Mission Specialist Lee Morin. The mission, 13th assembly flight to the International Space Station, includes the Integrated Truss Structure S0. The ITS S0 is the center segment on the Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is scheduled to launch April 4, 2002 KSC-02pd0107
KENNEDY SPACE CENTER, FLA. -- Members of the STS-101 crew take part in Crew Equipment Interface Test (CEIT) activities at SPACEHAB, in Cape Canaveral, Fla., where they are learning about some of the equipment they will be working with on their mission to the International Space Station. Looking over two of the components are (left to right) Mission Specialist Susan Helms, Commander James Halsell, Pilot Scott Horowitz, and Mission Specialists Mary Ellen Weber, Yuri Usachev and Jeffrey Williams. Not shown is Mission Specialist James Voss. The STS-101 crew will be responsible for preparing the Space Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000. Also, the crew will conduct one space walk to perform maintenance on the Space Station and deliver logistics and supplies. This will be the third assembly flight for the Space Station. STS-101 is scheduled to launch no earlier than April 13 from Launch Pad 39A KSC00pp0282
KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, in Cape Canaveral, Fla., members of the STS-101 crew and STS-106 crew take part in Crew Equipment Interface Test activities, learning from technicians in the facility about some of the equipment they will be working with on their mission to the International Space Station. From left are Claudia Melchiorre, who is with DASA, Daimler-Chrysler Aerospace; STS-106 Mission Specialist Richard Mastracchio; a SPACEHAB worker; Marty McLellan, director of ground operations; Mission Specialists Yuri Usachev of Russia and James Voss; Pilot Scott Horowitz; and Mission Specialist Jeffrey Williams. Other members of the STS-101 crew (not shown) are Mission Specialists Mary Ellen Weber and Susan Helms. The ST-101 crew will be responsible for preparing the Space Station for the arrival of the Zvezda Service Module, expected to be launched by Russia in July 2000. Also, the crew will conduct one space walk to perform maintenance on the Space Station and deliver logistics and supplies. This will be the third assembly flight for the Space Station. STS-101 is scheduled to launch no earlier than April 13 from Launch Pad 39A KSC-00pp0270
KENNEDY SPACE CENTER, Fla. -- From a vantage point below it, members of the STS-110 crew check out Integrated Truss Structure (ITS) S0, which is in the Operations and Checkout Building. From left are Mission Specialists Rex J. Walheim, Jerry L. Ross and Lee M. Morin. They and other crew members are taking part in a Crew Equipment Interface Test at KSC. Not shown are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialists Steven L. Smith and Ellen Ochoa. The ITS S0 is part of the payload on the mission. It is the center segment they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in February 2002 KSC-01pp1567
Summary
KENNEDY SPACE CENTER, Fla. -- From a vantage point below it, members of the STS-110 crew check out Integrated Truss Structure (ITS) S0, which is in the Operations and Checkout Building. From left are Mission Specialists Rex J. Walheim, Jerry L. Ross and Lee M. Morin. They and other crew members are taking part in a Crew Equipment Interface Test at KSC. Not shown are Commander Michael J. Bloomfield, Pilot Stephen N. Frick, and Mission Specialists Steven L. Smith and Ellen Ochoa. The ITS S0 is part of the payload on the mission. It is the center segment they will be installing on the International Space Station, part of the 300-foot (91-meter) truss attached to the U.S. Lab. By assembly completion, four more truss segments will attach to either side of the S0 truss. STS-110 is currently scheduled to launch in February 2002
Nothing Found.
Tags
kennedy space center
vantage
point
vantage point
sts
check
crew check
truss
truss structure
checkout
specialists
rex
mission specialists rex j
walheim
jerry
jerry l
ross
lee
lee m
morin
crew members
equipment
interface
test
crew equipment interface test
commander
michael
commander michael j
bloomfield
pilot
stephen
pilot stephen n
frick
steven
mission specialists steven l
smith
ellen
ochoa
ellen ochoa
payload
segment
center segment
international space station
lab
completion
truss segments
high resolution
nasa
florida
cape canaveral
Date
06/09/2001
Location
Source
NASA
Link
Copyright info
Public Domain Dedication (CC0)