visibility Similar

CAPE CANAVERAL, Fla. – In the High Bay 3 of NASA Kennedy Space Center's Vehicle Assembly Building, the Ares I-X forward segment is mated with the forward center segment, already stacked with the aft center and the aft skirt segments below. Part of the Constellation Program, the Ares I-X is the test vehicle for the Ares I, which is the essential core of a space transportation system that eventually will carry crewed missions back to the moon, on to Mars and out into the solar system . The Ares I-X flight test is targeted for no earlier than Aug. 30. Photo credit: NASA/Troy Cryder KSC-2009-4210

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building's High Bay 3, Super Stack 5 is secured to the Ares I-X segments already in place on the mobile launcher platform. Assembly of the Ares I-X rocket is complete. The 327-foot-tall rocket is one of the largest processed in the bay, rivaling the height of the Apollo Program's 364-foot-tall Saturn V. Five super stacks make up the rocket's upper stage that is integrated with the four-segment solid rocket booster first stage. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. The Ares I-X flight test is targeted for Oct. 31, pending formal NASA Headquarters approval. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-4672

CAPE CANAVERAL, Fla. – Space shuttle Endeavour is ready for the rollover from Orbiter Processing Facility 2 to the Vehicle Assembly Building at NASA's Kennedy Space Center, Fla. The first motion of the shuttle out of its hangar was at 6:56 a.m. EDT. In the VAB, Endeavour will be lifted into High Bay 1 and mated to the external fuel tank and solid rocket boosters already installed on the mobile launcher platform. Endeavour is scheduled to roll out to Launch Pad 39B in about a week. Endeavour will be prepared on the pad for liftoff in the unlikely event that a rescue mission is necessary following space shuttle Atlantis' launch on the STS-125 mission to service the Hubble Space Telescope. After Atlantis is cleared to land, Endeavour will move to Launch Pad 39A for its upcoming STS-127 mission to the International Space Station, targeted to launch in mid-June. Photo credit: NASA/Jim Grossmann KSC-2009-2567

CAPE CANAVERAL, Fla. – In high bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center, space shuttle Discovery continues to be lowered onto the mobile launcher platform in front of the solid rocket boosters and external tank. The stacking is in preparation for the launch on the upcoming STS-124 mission to the International Space Station. On the mission, the STS-124 crew will transport the Japanese Experiment Module - Pressurized Module and the Japanese Remote Manipulator System to the space station. Launch of Discovery is targeted for May 31 Photo credit: NASA/Jim Grossmann KSC-08pd1050

KENNEDY SPACE CENTER, FLA. - On Launch Pad 39B, the payload canister is moved into position beneath the payload changeout room (PCR) for transfer of its cargo into the PCR. The canister holds the payload for Atlantis and mission STS-115, the Port 3/4 truss segment with two large solar arrays. The payload changeout room provides an environmentally clean or "white room" condition in which to receive a payload transferred from a protective payload canister. After the shuttle arrives at the pad, the rotating service structure will close around it and the payload will then be transferred into Atlantis' payload bay. Atlantis' launch window begins Aug. 28. During its 11-day mission to the International Space Station, the STS-115 crew of six astronauts will install the truss, a 17-ton segment of the space station's truss backbone. Photo credit: NASA/George Shelton KSC-06pd1673

CAPE CANAVERAL, Fla. – In high bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the top part of the Ares I-X (upper left) undergoes modal survey testing after sensors were placed on the stack. The top consists of the launch abort tower, crew module, service module and spacecraft adaptor. Other segments are stacked nearby. Shakers will impose random loads/vibrations to determine the flight test vehicle’s first several bending modes and the strategically located sensors throughout the stacks will measure the amount, acceleration and direction of movement. The purpose of the testing is to confirm that Ares I-X will behave as predicted as it lifts off the pad and powers through the initial stage of flight in a demonstration flight later this year. Photo credit: NASA/Jack Pfaller KSC-2009-3351

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, technicians conduct Computed Radiography (CR) X-ray scans of 50 support beams, called stringers, on the shuttle-facing side of Atlantis' external tank at Launch Pad 39A. The hi-tech images will be taken of the tops and bottoms of the 21-foot long beams, which are located on the tank's intertank section. The scans follow a June 15th tanking test when the launch team filled then drained the tank of about 535,000 gallons of liquid hydrogen and liquid oxygen, just like for a launch. Earlier this year, managers directed teams to make the same stringer modifications to Atlantis' tank, ET-138, as they had after small cracks in the support beams of shuttle Discovery's STS-133 mission external tank were discovered. The scans will confirm there are no issues with Atlantis' tank. STS-135 Commander Chris Ferguson, Pilot Doug Hurley and Mission Specialists Sandy Magnus and Rex Walheim are targeted to lift off on space shuttle Atlantis July 8, taking with them the MPLM packed with supplies, logistics and spare parts to the International Space Station. The STS-135 mission also will fly a system to investigate the potential for robotically refueling existing satellites and return a failed ammonia pump module to help NASA better understand the failure mechanism and improve pump designs for future systems. STS-135 will be the 33rd flight of Atlantis, the 37th shuttle mission to the space station, and the 135th and final mission of NASA's Space Shuttle Program. For more information visit, www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Jim Grossmann KSC-2011-4577

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, space shuttle Discovery begins its nighttime trek, known as "rollout," from the Vehicle Assembly Building to Launch Pad 39A. It will take the shuttle, attached to its external fuel tank, twin solid rocket boosters and mobile launcher platform, about seven hours to complete the move atop a crawler-transporter. This is the second time Discovery has rolled out to the pad for the STS-133 mission, and comes after a thorough check and modifications to the shuttle's external tank. Targeted to liftoff Feb. 24, Discovery will take the Permanent Multipurpose Module (PMM) packed with supplies and critical spare parts, as well as Robonaut 2 (R2) to the International Space Station. For more information on STS-133, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts133/. Photo credit: NASA/Kim Shiflett KSC-2011-1259

S132E011135 - STS-132 - ISS Fly Around views during STS-132

code Related

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5679

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5676

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5680

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida haben Bauarbeiter eine Arbeitsplattform aus der Space-Shuttle-Ära aus Hochregal 3 im Vehicle Assembly Building (VAB) entfernt. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Weitere Informationen finden Sie unter http: / / www.nasa.gov / exploration / systems / ground / index.html. Bildnachweis: NASA / Charisse Nahser KSC-2012-5598

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5678

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida hebt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 in das Vehicle Assembly Building (VAB). Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5674

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senken Bauarbeiter die große Arbeitsplattform des Space Shuttle-Zeitalters auf Ebene E Nord von Hochregal 3 im Vehicle Assembly Building (VAB). Der Bahnsteig wird zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Weitere Informationen finden Sie unter http: / / www.nasa.gov / exploration / systems / ground / index.html. Bildnachweis: NASA / Kim Shiflett KSC-2012-5647

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5681

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida spricht Jim Bolton, Betriebsleiter im Vehicle Assembly Building, mit Nachrichtenmedien über die Entfernung einer Arbeitsplattform aus der Space-Shuttle-Ära aus Hochregal 3 innerhalb des VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5672

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett KSC-2012-5675

description

Zusammenfassung

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida senkt ein Kran eine Arbeitsplattform aus der Space-Shuttle-Ära von Hochregal 3 im Vehicle Assembly Building, kurz VAB. Der Bahnsteig wurde zur Zwischenlagerung auf den VAB-Nordparkplatz verlegt. Die Arbeiten sind Teil einer zentrumsweiten Sanierungsinitiative im Rahmen des Programms Ground Systems Development and Operations (GSDO). High Bay 3 wird renoviert, um das NASA Space Launch System und eine Vielzahl anderer Raumfahrzeuge unterzubringen. Bildnachweis: NASA / Kim Shiflett

Nichts gefunden.

label_outline

Tags

Plattform Kennedy Raumfahrtszentrum Cape Canaveral NASA Kennedy Space Center Shuttle-Ära Arbeitsplattform aus der Space-Shuttle-Ära Bucht vab Lagerung Mitte breit Renovierung Initiative Zentrumsweite Sanierungsinitiative Boden Entwicklung Entwicklung von Bodensystemen gsdo Programm hoch hohe Bucht Start NASA-Weltraumstartsystem Vielfalt Raumfahrzeug Fahrzeugmontagehalle hohe Auflösung Space Shuttle Raketenstart Startrampe Weltraumstartkomplex NASA
date_range

Datum

05/10/2012
place

Lage

create

Quelle

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright-info

Public Domain Dedication (CC0)

label_outline Explore Center Wide Refurbishment Initiative, Space Shuttle Era Work Platform, Shuttle Era

CAPE CANAVERAL, Florida - Techniker im Vehicle Assembly Building im Kennedy Space Center der NASA in Florida heben den Raupentransporter 2 oder CT-2 vier Meter vom Boden ab, um die Demontage der Rollenlager zu erleichtern. Nach der Inspektion werden neue Baugruppen installiert. Das Büro des Ground Systems Development and Operations Program in Kennedy beaufsichtigt die Aufrüstung auf CT-2, damit es die Schwerlastrakete Space Launch System der NASA und ein neues Orion-Raumschiff zur Startrampe bringen kann. Über 45 Jahre lang wurden die Raupentransporter für den Transport der mobilen Trägerplattform und der Apollo-Saturn V-Raketen und später der Space Shuttles zu den Startrampen 39A und B. verwendet. Bildnachweis: NASA / Charisse Nahser KSC-2013-1930

CAPE CANAVERAL, Florida - In High Bay 4 des Vehicle Assembly Building im Kennedy Space Center der NASA in Florida wird das Servicemodul / Serviceadapter-Segment des Oberstufensimulators Ares I-X (Vordergrund) auf seinen Umzug in einen Stand vorbereitet. Andere Segmente werden auf dem Boden um ihn herum platziert und gestapelt. Ares I-X ist das Testfahrzeug für den Ares I, der Teil des Konstellationsprogramms ist, um Menschen zum Mond und darüber hinaus zurückzubringen. Die Ares I-X soll im Juli 2009 auf den Markt kommen. Bildnachweis: NASA / Kim Shiflett KSC-2009-2462

CAPE CANAVERAL, Florida - Im Rahmen des Bodensystementwicklungs- und Betriebsprogramms der NASA am Kennedy Space Center in Florida wird eine große Arbeitsplattform aus der Space-Shuttle-Ära abgesenkt und aus Hochregal 3 des Vehicle Assembly Building (VAB) entfernt. Die Arbeiten sind Teil einer zentrumsweiten Modernisierungs- und Renovierungsinitiative, um das NASA-Weltraumabschusssystem und eine Vielzahl anderer Raumfahrzeuge unterzubringen, anstatt das gesamte Gebäude auf ein einziges Design zu stützen. Das Ground Systems Development and Operations Program entwickelt die erforderlichen Bodensysteme, Infrastrukturen und operativen Ansätze, um die nächste Generation von Raketen und Raumfahrzeugen zur Unterstützung der Explorationsziele der NASA sicher zu verarbeiten, zusammenzubauen, zu transportieren und zu starten. Künftige Arbeiten werden auch die antiquierten Kommunikations-, Strom- und Fahrzeugzugangsressourcen durch moderne, effiziente Systeme ersetzen. Einige der Versorgungseinrichtungen und Systeme, die ersetzt werden sollten, wurden seit der Gründung des VAB im Jahr 1965 verwendet. Weitere Informationen finden Sie unter http: / / www.nasa.gov / exploration / systems / ground / index.html Bildnachweis: NASA / Jim Grossmann KSC-2012-5965

CAPE CANAVERAL, Florida - Techniker für Bodenunterstützungsausrüstung überwachen den Fortschritt, während der Raupentransporter 1 seine Reise zur Startrampe 39A am Kennedy Space Center der NASA in Florida beginnt. Auf der CT-1 wurden neue Hub-, Ausgleichs- und Nivellierzylinder (JEL) installiert, die auf erhöhte Tragfähigkeit und Zuverlässigkeit getestet werden. Im Hintergrund ist das Gebäude der Fahrzeugmontage zu sehen. Das Ground Systems Development and Operations Program bei Kennedy rüstet den Raupentransporter im Rahmen seiner allgemeinen Wartung weiter auf. CT-1 könnte zur Verfügung stehen, um eine Vielzahl von Trägerraketen zur Startrampe zu bringen. Zwei Raupentransporter wurden 30 Jahre lang verwendet, um die mobile Trägerplattform und das Space Shuttle zum Startkomplex 39 für Space-Shuttle-Starts zu transportieren. Bildnachweis: NASA / Daniel Casper KSC-2013-4203

CAPE CANAVERAL, Florida - Durch die geöffnete Bugtür des Vehicle Assembly Building (VAB) im Kennedy Space Center der NASA in Florida wird das Space Shuttle Discovery auf seinen Umzug zur Orbiter Processing Facility-1 (OPF-1) vorbereitet. Discovery wechselt die Standorte mit dem Shuttle Endeavour, das in OPF-1 stillgelegt wurde. Beide Shuttles werden kurz vor OPF-3 für ein "Nase-an-Nase" Fototermin anhalten. Discovery wird dann in OPF-1 und Endeavour in den VAB umgewandelt. In OPF-1 wird Discovery weiteren Vorbereitungen für die öffentliche Präsentation im Smithsonian's National Air and Space Museum Steven F. Udvar-Hazy Center in Virginia unterzogen. Endeavour wird bis Oktober im VAB gelagert, bevor es in OPF-2 für weitere Arbeiten umgezogen wird, um es für die öffentliche Präsentation im California Science Center in Los Angeles bereit zu machen. Weitere Informationen finden Sie unter http: / / www.nasa.gov / shuttle. Bildnachweis: NASA / Dimitri Gerondidakis KSC-2011-6415

Cabana Multi-User Spaceport Tour von KSC

Orion Recovery Test 5 (URT-5) - Orion Kesselplattentest

CAPE CANAVERAL, Florida - Im Kennedy Space Center der NASA in Florida zeigt dieses Bild den letzten externen Treibstofftank des Space Shuttle Program, ET-122, nachdem er an den Transfergang des Vehicle Assembly Building (VAB) geliefert wurde. Der Panzer legte 900 Meilen auf dem Seeweg zurück und wurde in der Pegasus Barge vom Michoud Assembly Facility der NASA in New Orleans transportiert. Einmal im VAB, wird es schließlich an das Space Shuttle Endeavour für die STS-134-Mission zur Internationalen Raumstation angeschlossen, die im Februar 2011 starten soll. STS-134 soll derzeit die letzte Mission im Shuttle-Programm sein. Der Tank, das größte Element des Space Shuttle Stacks, wurde während des Hurrikans Katrina im August 2005 beschädigt und von Mitarbeitern der Lockheed Martin Space Systems Company wieder auf Flugkonfiguration gebracht. Bildnachweis: NASA / Kevin O 'Connell KSC-2010-4912

KENNEDY SPACE CENTER, FLA. - Im SRB Assembly and Refurbishment Facility betrachtet der STS-114 Missionsspezialist Stephen Robinson einen Teil des Schubvektorsteuerungssystems in einem Segment eines Feststoffraketen-Boosters. Die Besatzung ist beim KSC, um sich mit Shuttle- und Missionsausrüstung vertraut zu machen. Die Mission STS-114 ist Logistikflug 1, der Vorräte und Ausrüstung sowie die externe Stauplattform zur Internationalen Raumstation liefern soll. KSC-04pd0396

KENNEDY SPACE CENTER, FLA. -- Im Inneren des Vehicle Assembly Building wird der externe Tank für die Endeavour in Richtung der mobilen Trägerplattform abgesenkt, um mit den Feststoffraketen zusammenzuarbeiten. Endeavour ist derzeit für die Übertragung auf den VAB am 5. Juli vorgesehen. Endeavour ist der vorgesehene Orbiter für die Mission STS-118, die am 9. August zur Internationalen Raumstation starten soll. Die Mission wird den Bau der Raumstation fortsetzen, indem sie ein drittes Steuerbord-Fachwerk-Segment, S5, liefert sowie die externe Stauplattform 3 trägt. Bildnachweis: NASA / Amanda Diller KSC-07pd1541

VAB Plattform K (2) Lift & Montage in Highbay 3

CAPE CANAVERAL, Florida - Auf der Startrampe 39B am Kennedy Space Center der NASA in Florida entfernen Bauarbeiter weiterhin die Ziegel aus den Wänden der Flammengräben, die sich unterhalb und zwischen den linken und rechten Raupenbahnen befinden. Der Flammengrabenabweiser aus der Space-Shuttle-Ära wurde komplett entfernt. Startrampe 39B wird modernisiert, um das Weltraumabschusssystem der NASA und andere Trägerraketen zu unterstützen. Das Ground Systems Development and Operations (GSDO) Program Office bei Kennedy ist federführend bei der Transformation des Zentrums, um eine Vielzahl von Raketen und Raumfahrzeugen sicher zu handhaben. Weitere Informationen über GSDO finden Sie unter: http: / / go.nasa.gov / groundsystems. Bildnachweis: NASA / Kim Shiflett KSC-2013-4177

Themen

Plattform Kennedy Raumfahrtszentrum Cape Canaveral NASA Kennedy Space Center Shuttle-Ära Arbeitsplattform aus der Space-Shuttle-Ära Bucht vab Lagerung Mitte breit Renovierung Initiative Zentrumsweite Sanierungsinitiative Boden Entwicklung Entwicklung von Bodensystemen gsdo Programm hoch hohe Bucht Start NASA-Weltraumstartsystem Vielfalt Raumfahrzeug Fahrzeugmontagehalle hohe Auflösung Space Shuttle Raketenstart Startrampe Weltraumstartkomplex NASA