The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Base: Naval Air Station, Long Beach State: California (CA) Country: United States Of America (USA) Scene Camera More
Workers take off the protective covering on the propulsion module for the Cassini spacecraft after uncrating the module at KSC's Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2). The extended journey o More
Technicians from the Jet Propulsion Laboratory (JPL) lower the upper equipment module over a propellant tank in the Payload Hazardous Servicing Facility at KSC in July prior to installation on the Cassini orb More
At Launch Complex 40 on Cape Canaveral Air Station, the Mobile Service Tower has been retracted away from the Titan IVB/Centaur carrying the Cassini spacecraft and its attached Huygens probe. This is the second More
KENNEDY SPACE CENTER, FLA. -- Seen carrying a spent solid rocket booster (SRB) from the STS-87 launch on Nov. 19 is the solid rocket booster recovery ship Liberty Star as it reenters the Hangar AF area at Cape More
A spent solid rocket booster (SRB) from the STS-87 launch on Nov. 19 is lifted in a hoisting slip in the Hangar AF area at Cape Canaveral Air Station. Hangar AF is a building originally used for Project Mercury More
KENNEDY SPACE CENTER, FLA. -- Seen carrying a spent solid rocket booster (SRB) from the STS-87 launch on Nov. 19 is the solid rocket booster recovery ship Liberty Star as it reenters the Hangar AF area at Cape More
KENNEDY SPACE CENTER, FLA. -- The frustum of a forward skirt assembly of a spent solid rocket booster (SRB) from the STS-87 launch on Nov. 19 is transported into the Hangar AF area at Cape Canaveral Air Station More
A spent solid rocket booster (SRB) from the STS-87 launch on Nov. 19 is lifted in a hoisting slip in the Hangar AF area at Cape Canaveral Air Station. Hangar AF is a building originally used for Project Mercury More
NASA's Lunar Prospector is taken out of its crate at Astrotech, a commercial payload processing facility, in Titusville, Fla. The small robotic spacecraft, to be launched for NASA on an Athena 2 rocket by Lockh More
NASA's Lunar Prospector is taken out of its crate at Astrotech, a commercial payload processing facility, in Titusville, Fla. The small robotic spacecraft, to be launched for NASA on an Athena 2 rocket by Lockh More
At the Launch Equipment Test Facility, Mike Solomon, with Lockheed Martin Technical Operations, studies a part of the X-33 umbilical system during testing. Pointing to the part is Will Reaves, also with Lockhee More
At the Launch Equipment Test Facility, Will Reaves (top of stand), with Lockheed Martin Technical Operations, looks over components of the X-33 umbilical system undergoing testing. A team of Kennedy Space Cente More
At the Launch Equipment Test Facility, , Will Reaves and Mike Solomon (kneeling), both with Lockheed Martin Technical Operations, observe parts of the X-33 umbilical system during testing. A team of Kennedy Spa More
At the Launch Equipment Test Facility, Greg Melton (left), a NASA engineer, and Will Reaves (right), with Lockheed Martin Technical Operations, look at components of the X-33 umbilical system that is undergoing More
At the Launch Equipment Test Facility, workers check results from testing the X-33 umbilical system. From left are Greg Melton (left), a NASA engineer; Will Reaves, with Lockheed Martin Technical Operations; an More
At the Launch Equipment Test Facility, Mike Solomon (left) and Will Reaves (right), both with Lockheed Martin Technical Operations, move in for a close look at part of the X-33 umbilical system. A team of Kenne More
At the Launch Equipment Test Facility, Mike Ynclan, with Dynacs, and Greg Melton, a NASA engineer, look at measurements during testing of the X-33 umbilical system. A team of Kennedy Space Center experts develo More
CANOGA PARK, Calif. -- Pratt & Whitney Rocketdyne hot-fires a launch abort engine for The Boeing Co., which is developing its CST-100 spacecraft for NASA's Commercial Crew Program. Under its fixed-price contrac More
CANOGA PARK, Calif. -- Pratt & Whitney Rocketdyne hot-fires a launch abort engine for The Boeing Co., which is developing its CST-100 spacecraft for NASA's Commercial Crew Program. Under its fixed-price contrac More
CANOGA PARK, Calif. -- Pratt & Whitney Rocketdyne hot-fires a launch abort engine for The Boeing Co., which is developing its CST-100 spacecraft for NASA's Commercial Crew Program. Under its fixed-price contrac More
A recently installed fertilizer-producing system sits near Launch Pad 39A. Using a "scrubber," the system captures nitrogen tetroxide vapor that develops as a by-product when it is transferred from ground stora More
A recently installed fertilizer-producing system sits near Launch Pad 39A. Using a "scrubber," the system captures nitrogen tetroxide vapor that develops as a by-product when it is transferred from ground stora More
KENNEDY SPACE CENTER, FLA. -- A recently installed fertilizer-producing system sits near Launch Pad 39A (upper left background). Using a "scrubber," the system captures nitrogen tetroxide vapor that develops a More
KENNEDY SPACE CENTER, FLA. -- A recently installed fertilizer-producing system sits near Launch Pad 39A (upper left background). Using a "scrubber," the system captures nitrogen tetroxide vapor that develops a More
KENNEDY SPACE CENTER, FLA. -- Clyde Parrish, a NASA/KSC engineer, explains how the fertilizer scrubber control panel (center) works to turn nitrogen tetroxide vapor into fertilizer, potassium hydroxide. Parrish More
KENNEDY SPACE CENTER, FLA. -- Workers in the Spacecraft Assembly and Encapsulation Facility 2 place an antenna on the Microwave Anisotropy Probe (MAP). Several other milestones must be completed while MAP is a More
KENNEDY SPACE CENTER, FLA. -- The Microwave Anisotropy Probe (MAP) is worked on in the Spacecraft Assembly and Encapsulation Facility 2. Several milestones must be completed while MAP is at SAEF-2, including an More
KENNEDY SPACE CENTER, FLA. -- Workers in the Spacecraft Assembly and Encapsulation Facility 2 stand by while the Microwave Anisotropy Probe (MAP) is lifted to place it on a workstand. Several milestones must b More
KENNEDY SPACE CENTER, FLA. -- In the Spacecraft Assembly and Encapsulation Facility 2, the Microwave Anisotropy Probe (MAP) undergoes testing and checkout. Several milestones must be completed while MAP is at More
KENNEDY SPACE CENTER, FLA. -- These photos show a crack found on a metal liner used to direct flow in Space Shuttle Discovery's main propulsion system propellant lines. The top photo is magnified 30 times and More
KENNEDY SPACE CENTER, FLA. -- The cruise stage, aeroshell and lander for the Mars Exploration Rover-1 mission and the MER-2 rover arrive at KSC. The same flight hardware for the MER-2 rover arrived Jan. 27; how More
KENNEDY SPACE CENTER, FLA. -- The cruise stage, aeroshell and lander for the Mars Exploration Rover-1 mission and the MER-2 rover arrive at KSC's Multi-Payload Processing Facility. The same flight hardware for More
KENNEDY SPACE CENTER, FLA. - The aeroshell for the Mars Exploration Rover-1 mission is offloaded at KSC's Multi-Payload Processing Facility. While at KSC, the rovers, aeroshells and landers will undergo a ful More
KENNEDY SPACE CENTER, FLA. -- Another component of the Mars Exploration Rover-1 mission is moved into KSC's Multi-Payload Processing Facility. While at KSC, the rovers, aeroshells and landers will undergo a fu More
KENNEDY SPACE CENTER, FLA. -- Another component of the Mars Exploration Rover-1 mission is offloaded at KSC's Multi-Payload Processing Facility. While at KSC, the rovers, aeroshells and landers will undergo a More
KENNEDY SPACE CENTER, FLA. -- The aeroshell for the Mars Exploration Rover-1 mission is moved into KSC's Multi-Payload Processing Facility. While at KSC, the rovers, aeroshells and landers will undergo a full More
KENNEDY SPACE CENTER, FLA. -- A worker in the Payload Hazardous Servicing Facility examines the Mars Exploration Rover-2.The rover , aeroshell and lander will undergo a full mission simulation while at KSC. Al More
KENNEDY SPACE CENTER, FLA. - Workers in the Payload Hazardous Servicing Facility look over the aeroshell and cruise stage of Mars Exploration Rover-1. The upper portion is the heat shield on the aeroshell. Each More
KENNEDY SPACE CENTER, FLA. -- Workers in the Payload Hazardous Servicing Facility take a close look at the aeroshell and cruise stage of one of the Mars Exploration Rovers (MER). The upper portion is the heat s More
KENNEDY SPACE CENTER, FLA. -- With the shipping container lifted, the aeroshell and cruise stage of Mars Exploration Rover-1 are revealed in the Payload Hazardous Servicing Facility. The upper portion is the More
KENNEDY SPACE CENTER, FLA. -- Components of the flight hardware for Mars Exploration Rover-1 are in the Payload Hazardous Servicing Facility. At left is the rover. In the center is the cruise stage, which in More
KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility, elements of one of the Mars Exploration Rovers (MER) come together. In the foreground is a lander. In the background are an aeroshell, More
KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility, the shipping container is lifted off the components of Mars Exploration Rover-1, the aershell and cruise stage. Each rover , aeroshell a More
KENNEDY SPACE CENTER, FLA. - Workers in the Payload Hazardous Servicing Facility move the aeroshell and cruise stage of one of the Mars Exploration Rovers (MER). The two rovers, MER-1 and MER-2, aeroshells and More
KENNEDY SPACE CENTER, FLA. -- A worker in the Payload Hazardous Servicing Facility looks closely at the Mars Exploration Rover-2. Each rover , aeroshell and lander will undergo a full mission simulation while More
KENNEDY SPACE CENTER, Fla. - A technician in the Payload Hazardous Servicing Facility works on the cruise stage of one of the Mars Exploration Rovers (MER). MER-1 and MER-2, their aeroshells and landers will u More
KENNEDY SPACE CENTER, Fla. - In the Payload Hazardous Servicing Facility technicians work on one of the aeroshell assemblies for the Mars Exploration Rovers (MER). MER-1 and MER-2, their aeroshells and landers More
KENNEDY SPACE CENTER, Fla. - The Mars Exploration Rover 2 (MER-2) undergoes testing in the Payload Hazardous Servicing Facility. MER-1 and MER-2, their aeroshells and landers will undergo a full mission simul More
KENNEDY SPACE CENTER, FLA. - The Mars Exploration Rover 2 (MER-2) undergoes testing in the Payload Hazardous Servicing Facility. MER-1 and MER-2, their aeroshells and landers will undergo a full mission simul More
KENNEDY SPACE CENTER, Fla. - The Mars Exploration Rover 2 (MER-2) undergoes testing in the Payload Hazardous Servicing Facility. MER-1 and MER-2, their aeroshells and landers will undergo a full mission simul More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility look over one of the two Mars Exploration Rovers, MER-2. MER-1 and MER-2, their aeroshells and landers will undergo a full missi More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility observe as one of the two Mars Exploration Rovers, MER-2, undergoes testing. MER-1 and MER-2, their aeroshells and landers will More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility observe as one of the two Mars Exploration Rovers, MER-2, undergoes testing. MER-1 and MER-2, their aeroshells and landers will More
KENNEDY SPACE CENTER, Fla. - Components of the Mars Exploration Rovers are undergoing testing in the Payload Hazardous Servicing Facility. In the foreground is a lander with its three side petals extended. In More
KENNEDY SPACE CENTER, Fla. - This view in the Payload Hazardous Servicing Facility shows one of the Mars Exploration Rover landers with its three side petals extended. The rover will sit inside of the enclosed More
KENNEDY SPACE CENTER, Fla. - Technicians in the Payload Hazardous Servicing Facility work on one of the Mars Exploration Rovers, MER-2. The two rovers, MER-1 and MER-2, their aeroshells and landers will under More
KENNEDY SPACE CENTER, Fla. - In the Payload Hazardous Servicing Facility, one of the two Mars Exploration Rovers, MER-2, undergoes testing. MER-1 and MER-2, their aeroshells and landers will undergo a full mi More
KENNEDY SPACE CENTER, Fla. -A worker in the Payload Hazardous Servicing Facility pauses during checkout of one of the two Mars Exploration Rovers, MER-2. MER-1 and MER-2, their aeroshells and landers will unde More
KENNEDY SPACE CENTER, Fla. - Both Mars Exploration Rovers, MER-1 and MER-2, are seen in this photo. While at KSC, each of the rovers, their aeroshells and landers will undergo a full mission simulation. After More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility check over the newly arrived second Mars Exploration Rover, MER-1. It will undergo prelaunch testing, including deployment of t More
KENNEDY SPACE CENTER, Fla. - A worker in the Payload Hazardous Servicing Facility examines the Mars Exploration Rover-1 during prelaunch testing. While at KSC, each of the two rovers, their aeroshells and lan More
KENNEDY SPACE CENTER, Fla. - A worker in the Payload Hazardous Servicing Facility checks the newly arrived second Mars Exploration Rover, MER-1. It will undergo prelaunch testing, including deployment of the More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility watch as the cover is lifted off the second Mars Exploration Rover, MER-1. MER-2 and other hardware have already arrived at KSC More
KENNEDY SPACE CENTER, Fla. - More Mars hardware is moved into the Payload Hazardous Servicing Facility, which already holds one of the Mars Exploration Rovers (MER) and the aeroshells and landers for both rove More
KENNEDY SPACE CENTER, Fla. - In the Payload Hazardous Servicing Facility, workers appear to adjust the platform holding the second Mars Exploration Rover, MER-1. It will undergo prelaunch testing, including d More
KENNEDY SPACE CENTER, Fla. - In the Payload Hazardous Servicing Facility, workers check out the Mars Exploration Rover-1 (background). In the foreground is part of the lander. While at KSC, each of the two r More
KENNEDY SPACE CENTER, Fla. - A worker in the Payload Hazardous Servicing Facility checks wiring on the Mars Exploration Rover-1. While at KSC, each of the two rovers, their aeroshells and landers will undergo More
KENNEDY SPACE CENTER, Fla. - Outside the Payload Hazardous Servicing Facility hardware related to the Mars Exploration Rovers (MER) is offloaded from a transport vehicle. MER-1 will undergo prelaunch testing, More
KENNEDY SPACE CENTER, Fla. - Outside the Payload Hazardous Servicing Facility, the second Mars Exploration Rover (MER-1), in its shipping container, is moved inside. MER-2 and other hardware have already arriv More
KENNEDY SPACE CENTER, Fla. - In the Payload Hazardous Servicing Facility, the second Mars Exploration Rover, MER-1, is displayed. It will undergo prelaunch testing, including deployment of the lander petals, t More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility unwrap the second Mars Exploration Rover, MER-1. MER-2 and other hardware have already arrived at KSC for processing. MER-1 wil More
KENNEDY SPACE CENTER, Fla. - An overhead lift is attached to Mars Exploration Rover-1. In the background is MER-2. While at KSC, each of the rovers, their aeroshells and landers will undergo a full mission si More
KENNEDY SPACE CENTER, Fla. - Workers in the Payload Hazardous Servicing Facility look over Mars Exploration Rover-1, which is ready for prelaunch testing including deployment of the lander petals, the rover's More
KENNEDY SPACE CENTER, Fla. - The second Mars Exploration Rover, MER-1, sits revealed on a platform in the Payload Hazardous Servicing Facility after being unwrapped . MER-2 and other hardware have already arr More
KENNEDY SPACE CENTER, Fla. - The second Mars Exploration Rover (MER-1) arrives at the Payload Hazardous Servicing Facility. MER-2 and other hardware have already arrived at KSC for processing. While at KSC, More
KENNEDY SPACE CENTER, Fla. - Mars Exploration Rover-1 is ready for prelaunch testing including deployment of the lander petals, the rover's solar arrays, camera mast and camera. While at KSC, each of the rove More
KENNEDY SPACE CENTER, FLA. -- The second Mars Exploration Rover (MER-1) enters Kennedy Space Center. MER-2 and other hardware have already arrived at KSC for processing. While at KSC, each of the rovers, the More
KENNEDY SPACE CENTER, Fla. - Outside the Payload Hazardous Servicing Facility, the open door of the transport shows the shipping container with the second Mars Exploration Rover (MER-1) inside. MER-2 and othe More
The original finding aid described this photograph as: Subject Operation/Series: IRAQI FREEDOM Country: Iraq (IRQ) Scene Camera Operator: SSGT Bryan Reed, USMC Release Status: Released to Public Combined Mi More
The original finding aid described this photograph as: Subject Operation/Series: IRAQI FREEDOM Country: Iraq (IRQ) Scene Camera Operator: SSGT Bryan Reed, USMC Release Status: Released to Public Combined Mi More
KENNEDY SPACE CENTER, FLA. - Jeff Thon, an SRB mechanic with United Space Alliance, is fitted with a harness to test a vertical solid rocket booster propellant grain inspection technique. Thon will be lowere More
KENNEDY SPACE CENTER, FLA. - At the Rotation, Processing and Surge Facility stand a mockup of two segments of a solid rocket booster (SRB) being used to test the feasibility of a vertical SRB propellant grain More
KENNEDY SPACE CENTER, FLA. - Jeff Thon, an SRB mechanic with United Space Alliance, is fitted with a harness to test a vertical solid rocket booster propellant grain inspection technique. Thon will be lowere More
KENNEDY SPACE CENTER, FLA. - Seen from below and through a solid rocket booster segment mockup, Jeff Thon, an SRB mechanic with United Space Alliance, tests the feasibility of a vertical solid rocket booster More
KENNEDY SPACE CENTER, FLA. - Jeff Thon, an SRB mechanic with United Space Alliance, tests a technique for vertical solid rocket booster propellant grain inspection. The inspection of segments is required as More
KENNEDY SPACE CENTER, FLA. - Seen from below and through a solid rocket booster segment mockup, Jeff Thon, an SRB mechanic with United Space Alliance, tests the feasibility of a vertical solid rocket booster More
KENNEDY SPACE CENTER, FLA. - Viewed from inside the aft section of the orbiter Discovery, a worker installs the liquid oxygen feedline for the 17-inch disconnect, coming up from below. The 17-inch liquid oxyge More
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers install the liquid oxygen feedline for the 17-inch disconnect on orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen discon More
KENNEDY SPACE CENTER, FLA. - Viewed from inside the aft section of the orbiter Discovery, a worker installs the liquid oxygen feedline for the 17-inch disconnect, coming up from below. The 17-inch liquid oxyge More
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers raise the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liq More
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers install the liquid oxygen feedline for the 17-inch disconnect on orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen disconn More
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers move the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and liqu More
KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility insert the liquid oxygen feedline for the 17-inch disconnect in the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen dis More
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers raise the liquid oxygen feedline for the 17-inch disconnect toward orbiter Discovery for installation. The 17-inch liquid oxygen and li More
KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility insert the liquid oxygen feedline for the 17-inch disconnect in the orbiter Discovery. The 17-inch liquid oxygen and liquid hydrogen dis More
KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility oversee installation of the liquid oxygen feedline for the 17-inch disconnect on the orbiter Discovery. The 17-inch liquid oxygen and li More