Similar
KENNEDY SPACE CENTER, FLA. - In the Multi-Payload Processing Facility, members of the STS-107 crew run tests on the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) experiments, part of the payload on their mission. A research mission, the primary payload is the first flight of the SHI Research Double Module (SHI/RDM), also known as SPACEHAB. The experiments range from material sciences to life sciences (many rats). STS-107 is scheduled to launch July 11, 2002 KSC-02pd0422
In the Space Station Processing Facility, the STS-99 crew looks over the payload for their mission, the Shuttle Radar Topography Mission (SRTM). Pointing to the SRTM are Commander Kevin R. Kregel and Mission Specialist Gerhard Thiele of Germany. Behind them are (left to right) Pilot Dominic L. Pudwill Gorie and Mission Specialists Mamoru Mohri of Japan and Janet Lynn Kavandi (Ph.D.) The remaining crew member (not shown) is Mission Specialist Janice Voss (Ph.D.) Mohri represents the National Space Development Agency of Japan and Thiele represents the European Space Agency. An international project spearheaded by the National Imagery and Mapping Agency and NASA, with participation of the German Aerospace Center DLR, the SRTM consists of a specially modified radar system that will gather data for the most accurate and complete topographic map of the Earth's surface that has ever been assembled. SRTM will make use of radar interferometry, wherein two radar images are taken from slightly different locations. Differences between these images allow for the calculation of surface elevation, or change. The SRTM hardware will consist of one radar antenna in the shuttle payload bay and a second radar antenna attached to the end of a mast extended 60 meters (195 feet) out from the shuttle. STS-99 is scheduled to launch Sept. 16 at 8:47 a.m. from Launch Pad 39A KSC-99pp0777
KENNEDY SPACE CENTER, FLA. — In the Space Station Processing Facility at NASA Kennedy Space Center, the rack insertion device lifts one of the supply racks for installation in the multi-purpose logistics module Leonardo (at right). The module is being prepared for the second return-to-flight mission, STS-121, on space shuttle Discovery, carrying more than two tons of equipment and supplies to the International Space Station. This will be the fourth trip to the station for Leonardo, the first of three Italian-built logistic modules. Equipment and supplies no longer needed on the station will be moved to Leonardo before it is unberthed on Flight Day 10 and put back into Discovery's cargo bay for return to Earth. This second return-to-flight test mission is to carry on analysis of safety improvements that debuted on the first return-to-flight mission, STS-114, and build upon those tests. The launch is targeted for a date no earlier than May. Photo credit: NASA/George Shelton KSC-06pd0125
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, workers monitor the Lightweight Multi-Purpose Experiment Support Structure Carrier (LMC) as it is lifted by a crane. Slated to fly on space shuttle mission STS-121, the LMC is ready to be delivered to Launch Pad 39B for installation into orbiter Discovery. It is a cross-bay carrier for hardware required to perform development test objective 848. Test objective 848 is a demonstration of the tools and techniques developed to repair damaged orbiter thermal protection system tiles during a spacewalk, or extravehicular activity. The target launch window for STS-121 is July 1 to July 19, 2006. Photo credit: NASA/Cory Husten KSC-06pd0794
CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane lowers the ICS Exposed Facility, or ICS-EF, onto the Japanese Experiment Module's Experiment Logistics Module-Exposed Section, or ELM-ES, for installation. It is being placed next to two other payloads, the SEDA-AP (Space Environment Data Acquisition Equipment-Attached Payload) and MAXI (Monitor of All-sky X-ray Image). The ICS-EF is part of space shuttle Endeavour's payload on the STS-127 mission, targeted for launch on May 15. Photo credit: NASA/Jim Grossmann KSC-2009-1091
Workers in the Space Assembly and Encapsulation Facility 2 oversee the lifting of the Mars Odyssey Orbiter from its workstand. The orbiter will be moved and attached to the third stage of a Delta rocket, at right. The Mars Odyssey is scheduled for launch on April 7, 2001, aboard a Delta II rocket from Launch Pad 17-A, Cape Canaveral Air Force Station KSC01pp0603
NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft
COMBUSTION MODULE 1 CM-1. Public domain image, NASA.
Fifth anniversary of the first element of the International Spac
Related
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
THEMIS SPACECRAFT - Public domain NASA photogrpaph
Summary
The original finding aid described this as:
Description: NASA's Time History of Events and Macroscale Interactions during Substorms (THEMIS) SPACECRAFT LOCATED IN THE SWALES AEROSPACE CLEANROOM..
Photographer: CHRIS GUNN
Date: 1/30/2006
Job Number: 2006-00591-0
Preservation Copy: .tif
2006
Nothing Found.
Tags
themis
spacecraft
nasa
high resolution
themis spacecraft
swales aerospace cleanroom
macroscale interactions
chris gunn
job number
preservation copy
space program
Date
2006 - 2011
Source
The U.S. National Archives
Link
Copyright info
No known copyright restrictions