visibility Similar

KENNEDY SPACE CENTER, FLA. - In the RTG Facility at Kennedy Space Center, Dan Brunson and Jim Wojciechowski lower the radioisotope thermoelectric generator (RTG) onto a transporter. The RTG is the baseline power supply for the NASA’s New Horizons spacecraft, scheduled to launch in January 2006 on a journey to Pluto and its moon, Charon. As it approaches Pluto, the spacecraft will look for ultraviolet emission from Pluto's atmosphere and make the best global maps of Pluto and Charon in green, blue, red and a special wavelength that is sensitive to methane frost on the surface. It will also take spectral maps in the near infrared, telling the science team about Pluto's and Charon's surface compositions and locations and temperatures of these materials. When the spacecraft is closest to Pluto or its moon, it will take close-up pictures in both visible and near-infrared wavelengths. It is expected to reach Pluto in July 2015. KSC-05pd2436

KENNEDY SPACE CENTER, FLA. -- At SPACEHAB, STS-107 Mission Specialist Michael Anderson (gloved, in center) gets hands-on experience with equipment. Identified as a research mission, STS-107 is scheduled for launch July 19, 2001 KSC-00pp1592

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers secure the nose cap of the orbiter Atlantis on a stand. The cap was removed from the orbiter for routine inspection. The nose cap is made of reinforced carbon-carbon (RCC), which has an operating range of minus 250° F to about 3,000° F.

CAPE CANAVERAL, Fla. – Dr. Mason Peck, NASA's chief technologist, talks with managers of the Morpheus lander that will soon begin flight and landing tests at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. Photo credit: NASA/Jim Grossman KSC-2012-4133

Expedition 9 Soyuz Assembly. NASA public domain image colelction.

Several members of the Congressional Staff Delegation

Lustrum Studentenvereniging Sanctus Thomas Aquinas.

CAPE CANAVERAL, Fla. – Engineers and technicians prepare NASA's Project Morpheus prototype lander for free flight test number 15 at the north end of the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The lander will take off from the ground over a flame trench and use its autonomous landing and hazard avoidance technology, or ALHAT sensors, to survey the hazard field to determine safe landing sites. Project Morpheus tests NASA’s ALHAT and an engine that runs on liquid oxygen and methane, which are green propellants. These new capabilities could be used in future efforts to deliver cargo to planetary surfaces. Project Morpheus is being managed under the Advanced Exploration Systems, or AES, Division in NASA’s Human Exploration and Operations Mission Directorate. For more information on Project Morpheus, visit http://morpheuslander.jsc.nasa.gov/. Photo credit: NASA/Jim Grossmann KSC-2014-4808

KENNEDY SPACE CENTER, FLA. -- At Astrotech Space Operations, a worker prepares the THEMIS spacecraft for black/white light inspection. White light inspection assures the telemetry is operating. Black light inspection uses UVA fluorescence to detect possible particulate microcontamination, minute cracks or fluid leaks. THEMIS consists of five identical probes, the largest number of scientific satellites ever launched into orbit aboard a single rocket. This unique constellation of satellites will resolve the tantalizing mystery of what causes the spectacular sudden brightening of the aurora borealis and aurora australis - the fiery skies over the Earth's northern and southern polar regions. THEMIS is scheduled to launch Feb. 15 from Cape Canaveral Air Force Station. Photo credit: NASA/George Shelton KSC-07pd0044

code Related

Technicians Manufacture a Nozzle for the Kiwi B-1-B Engine

description

Summary

Technicians manufacture a nozzle for the Kiwi B-1-B nuclear rocket engine in the Fabrication Shop’s vacuum oven at the National Aeronautics and Space Administration (NASA) Lewis Research Center. The Nuclear Engine for Rocket Vehicle Applications (NERVA) was a joint NASA and Atomic Energy Commission (AEC) endeavor to develop a nuclear-powered rocket for both long-range missions to Mars and as a possible upper-stage for the Apollo Program. The early portion of the program consisted of basic reactor and fuel system research. This was followed by a series of Kiwi reactors built to test basic nuclear rocket principles in a non-flying nuclear engine. The next phase, NERVA, would create an entire flyable engine. The final phase of the program, called Reactor-In-Flight-Test, would be an actual launch test. The AEC was responsible for designing the nuclear reactor and overall engine. NASA Lewis was responsible for developing the liquid-hydrogen fuel system. The turbopump, which pumped the fuels from the storage tanks to the engine, was the primary tool for restarting the engine. The NERVA had to be able to restart in space on its own using a safe preprogrammed startup system. Lewis researchers endeavored to design and test this system. This non-nuclear Kiwi engine, seen here, was being prepared for tests at Lewis’ High Energy Rocket Engine Research Facility (B-1) located at Plum Brook Station. The tests were designed to start an unfueled Kiwi B-1-B reactor and its Aerojet Mark IX turbopump without any external power.

label_outline

Tags

grc b 1 b glenn research center technicians manufacture technicians manufacture nozzle kiwi kiwi b engine test high energy rocket engine research facility nerva kiwi b 1 b engine non nuclear kiwi engine rocket engine reactor kiwi b 1 b reactor nuclear engine flyable engine fuel system research kiwi reactors lewis research center program kiwi b 1 b lewis researchers liquid hydrogen fuel system rocket vehicle applications nasa lewis nasa
date_range

Date

21/05/1964
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Lewis Researchers, Nasa Lewis, Nerva

Nerva, römischer Kaiser - Public domain portrait engraving

Colonacce in het Foro di Nerva in Rome

Detroit, Michigan. Steps in the manufacture of casings for 105 mm. shells in the Budd wheel plant. Lubricating fluid pouring on the base end of a shell which is being finished

8X6 FOOT WIND TUNNEL FOR LEWIS NEWS NEWSLETTER STORY ABOUT THE 30TH ANNIVERSARY

Stativ, komponent till Reaktor R1.

COMMUNICATION TECHNOLOGY SATELLITE CTS PROJECT OFFICE BRANCH STORY FOR LEWIS NEWS

Conversion. Merry-go-round plant. This is a South Bend swing lathe used formerly in the manufacture of merry-go-rounds. This machine, along with others in this New York state plant is now turning out bits and pieces for our war program. Spillman Engineering Company, North Tonawanda, New York

NASA PLUM BROOK NUCLEAR REACTOR DECOMMISSIONING

Self-sealing fuel tanks. Not only as nurses behind the battle lines, but as workers in the factory producing important war goods, women are doing much to win this war and to spare the lives of the men doing the actual fighting. These girls are stitching inner ply to a building form used in the manufacture of self-sealing tanks. Goodrich

Steel alloy manufacture. Allegheny Ludlum Steel Corporation, Brackenridge, Pennsylvania. Quality in the manufacture of steel requires constant control and research. This chemist is weighing the elements of a steel alloy to determine its exact composition. Analysis is determined to 1/1000 of 1 percent of each element in the alloy

CHINESE DELEGATION AT NASA LEWIS

NASA LEWIS RESEARCH CENTER AND GENERAL ELECTRIC GE E3 TEST HARDWARE

Topics

grc b 1 b glenn research center technicians manufacture technicians manufacture nozzle kiwi kiwi b engine test high energy rocket engine research facility nerva kiwi b 1 b engine non nuclear kiwi engine rocket engine reactor kiwi b 1 b reactor nuclear engine flyable engine fuel system research kiwi reactors lewis research center program kiwi b 1 b lewis researchers liquid hydrogen fuel system rocket vehicle applications nasa lewis nasa