visibility Similar

S109E5151 - STS-109 - Bulkhead over Bay 10 on the -V2 plane of the Hubble Space Telescope

STS113-711-059 - STS-113 - Television Camera mounted on the ITS, image taken STS-113

CAPE CANAVERAL, Fla. – Inside the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, engineers and technicians use a crane to move the Mars Atmosphere and Volatile Evolution, or MAVEN, spacecraft to a work stand for electrical testing. MAVEN is being prepared for its scheduled launch in November from Cape Canaveral Air Force Station, Fla. atop a United Launch Alliance Atlas V rocket. Positioned in an orbit above the Red Planet, MAVEN will study the upper atmosphere of Mars in unprecedented detail. For more information, visit: http://www.nasa.gov/mission_pages/maven/main/index.html Photo credit: NASA/Jim Grossmann MAVEN is being prepared inside the facility for its scheduled November launch aboard a United Launch Alliance Atlas V rocket to Mars. Positioned in an orbit above the Red Planet, MAVEN will study the upper atmosphere of Mars in unprecedented detail. Photo credit: NASA/Jim Grossmann KSC-2013-3381

KENNEDY SPACE CENTER, Fla. -- In the Payload Hazardous Servicing Facility, workers attach a crane to the heat shield for the Phoenix Mars Lander spacecraft. The crane will lift and move the heat shield for installation over the lander within the cruise stage. Targeted for launch from Cape Canaveral Air Force Station on Aug. 3, Phoenix will land in icy soils near the north polar permanent ice cap of Mars and explore the history of the water in these soils and any associated rocks, while monitoring polar climate. Landing on Mars is planned in May 2008 on arctic ground where a mission currently in orbit, Mars Odyssey, has detected high concentrations of ice just beneath the top layer of soil. Photo credit: NASA/Troy Cryder KSC-07pd2008

Troy Blaschko, 57th Maintenance Group Corrosion shop

CAPE CANAVERAL, Fla. – Inside the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida, engineers and technicians prepare to move the Mars Atmosphere and Volatile Evolution, or MAVEN, spacecraft to a work stand for electrical testing. MAVEN is being prepared for its scheduled launch in November from Cape Canaveral Air Force Station, Fla. atop a United Launch Alliance Atlas V rocket. Positioned in an orbit above the Red Planet, MAVEN will study the upper atmosphere of Mars in unprecedented detail. For more information, visit: http://www.nasa.gov/mission_pages/maven/main/index.html Photo credit: NASA/Jim Grossmann MAVEN is being prepared inside the facility for its scheduled November launch aboard a United Launch Alliance Atlas V rocket to Mars. Positioned in an orbit above the Red Planet, MAVEN will study the upper atmosphere of Mars in unprecedented detail. Photo credit: NASA/Jim Grossmann KSC-2013-3375

s103e5448 - STS-103 - Public domain NASA photogrpaph

EVA camera on Question airlock. NASA public domain image colelction.

S105E5299 - STS-105 - Forrester installs a MISSE PEC on the Airlock Crewlock endcone during EVA

code Related

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialists Michael Fossum (left) and Piers Sellers check out the cover on the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0540

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialists Michael Fossum (left) and Piers Sellers practice removing the cover from the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0541

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialist Piers Sellers works with a strap on the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0542

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA Kennedy Space Center, members of the STS-121 crew take part in the crew equipment interface test (CEIT). Seen here is Mission Specialist Piers Sellers working on part of the replacement trailing umbilical system reel assembly that will be installed on the International Space Station. The CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in May. Photo credit: NASA/Kim Shiflett KSC-06pd0267

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialist Michael Fossum holds a loop on a cover for the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0539

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA Kennedy Space Center, members of the STS-121 crew take part in the crew equipment interface test (CEIT). Seen here are Mission Specialists Piers Sellers (hands raised) and Michael Fossum (foreground). They are looking at the replacement trailing umbilical system reel assembly that will be installed on the International Space Station. The CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in May. Photo credit: NASA/Kim Shiflett KSC-06pd0266

KENNEDY SPACE CENTER, FLA. - The crew for mission STS-121 is taking part in a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center. Seen here (left to right) are Mission Specialists Michael Fossum, Stephanie Wilson and Lisa Nowak looking at the trailing umbilical system reel assembly that will be installed on the International Space Station. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0536

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA Kennedy Space Center, members of the STS-121 crew take part in the crew equipment interface test (CEIT). Seen here is Mission Specialist Michael Fossum, looking at the replacement trailing umbilical system reel assembly that will be installed on the International Space Station. The CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in May. Photo credit: NASA/Kim Shiflett KSC-06pd0265

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA Kennedy Space Center, STS-121 Mission Specialist Piers Sellers practices working with the replacement trailing umbilical system reel assembly that will be installed on the International Space Station. He and other crew members -- Commander Steven Lindsey, Pilot Mark Kelly and Mission Specialists Lisa Nowak, Stephanie Wilson and Michael Fossum -- are at Kennedy to take part in the crew equipment interface test (CEIT). The CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in May. Photo credit: NASA/Kim Shiflett KSC-06pd0272

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialist Piers Sellers works with the cover for the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett KSC-06pd0543

description

Summary

KENNEDY SPACE CENTER, FLA. - During a Crew Equipment Interface Test (CEIT) inside the Space Station Processing Facility at NASA's Kennedy Space Center, STS-121 Mission Specialist Piers Sellers works with the cover for the trailing umbilical system reel assembly that will be installed on the International Space Station during their mission. A CEIT provides hands-on experiences with equipment used on-orbit. Mission STS-121 is the second in the Return to Flight sequence and will carry on improvements that debuted during last year's STS-114 mission and build upon those tests. Launch is scheduled in July. Photo credit: NASA/Kim Shiflett

Nothing Found.

label_outline

Tags

kennedy space center crew equipment interface crew equipment interface test ceit sts specialist piers sellers mission specialist piers sellers works cover system reel system reel international space station experiences on orbit mission sts sequence flight sequence improvements year tests launch high resolution nasa florida cape canaveral
date_range

Date

2005
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore System Reel, Flight Sequence, Ceit

S127E012325 - STS-127 - Deployment of DRAGONSAT from Space Shuttle Endeavours Payload Bay

STS077-369-005 - STS-077 - STS-77 on-orbit portrait

KENNEDY SPACE CENTER, FLA. -- During Crew Equipment Interface Test (CEIT) activities at SPACEHAB, members of the STS-106 crew check out a Russian foot restraint, equipment that will be part of the payload on their mission to the International Space Station. Around the table are Mission Specialist Yuri I. Malenchenko (back to camera), a SPACEHAB worker, and Mission Specialists Daniel C. Burbank (at end of table) and Edward T. Lu (right). Others at KSC for the CEIT are Commander Terrence W. Wilcutt, Pilot Scott D. Altman, and Mission Specialists Boris V. Morukov and Richard A. Mastracchio. Malenchenko and Morukov represent the Russian Aviation and Space Agency. On the 11-day mission, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module for the first long-duration crew, dubbed “Expedition One,” which is due to arrive at the Station in late fall. STS-106 is scheduled to launch Sept. 8, 2000, at 8:31 a.m. EDT from Launch Pad 39B KSC00pp0961

STS 121 PRESENTATION BY ASTRONAUT PIERS SELLERS

KENNEDY SPACE CENTER, FLA. -- As part of Crew Equipment Interface Test (CEIT) activities at SPACEHAB, members of the STS-106 crew check out a Maximum Envelope Support Structure (MESS) rack they will be using during their mission to the International Space Station. Seen here (with backs to camera, in uniform) are Mission Specialist Richard A. Mastracchio, Pilot Scott D. Altman, Boris V. Morukov, and Edward T. Lu (at right). Also taking part in the CEIT are Commander Terrence W. Wilcutt and Mission Specialists Yuri I. Malenchenko and Daniel C. Burbank. Malenchenko and Morukov represent the Russian Aviation and Space Agency. STS-106 is scheduled to launch Sept. 8, 2000, at 8:31 a.m. EDT from Launch Pad 39B on an 11-day mission. The seven-member crew will prepare the Space Station for its first resident crew and begin outfitting the newly arrived Zvezda Service Module. They will perform support tasks on orbit, transfer supplies and prepare the Zvezda living quarters for the first long-duration crew, dubbed “Expedition One,” which is due to arrive at the Station in late fall KSC00pp0952

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at equipment on the Japanese Experiment Module, called Kibo, including the Remote Manipulator System, or RMS, two robotic arms that support operations on the outside of the Kibo. Crew members are at Kennedy for a crew equipment interface test that includes familiarization with tools and equipment that will be used on the mission. The STS-124 mission is the second of three flights that will launch components to complete the Japanese pressurized module, the Kibo laboratory. The mission will include two spacewalks to install the new lab and its remote manipulator system. The lab's logistics module, which will have been installed in a temporary location during STS-123, will be attached to the new lab. Photo credit: NASA/Kim Shiflett KSC-08pd0058

800mm Mapping Sequence performed during the STS-127 R-Bar Pitch Maneuver

STS112-703-096 - STS-112 - EVA 1 - Sellers on S1 truss

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115 Mission Specialist Daniel Burbank is practicing folding a sequential shunt unit launch to activation multilayer installation blanket. Burbank and other crew members are at the center for Crew Equipment Interface Test activities. Equipment familiarization is a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1181

S121E06337 - STS-121 - Sellers on RMS/OBSS for Position 1 Evaluation on EVA1 during STS-121 / Expedition 13 joint operations

Expedition 40 on-orbit portrait

s133E008642 - STS-133 - STS-133 / Expedition 26 on-orbit crew portrait

Topics

kennedy space center crew equipment interface crew equipment interface test ceit sts specialist piers sellers mission specialist piers sellers works cover system reel system reel international space station experiences on orbit mission sts sequence flight sequence improvements year tests launch high resolution nasa florida cape canaveral