1,026 Sequence Image: PICRYL - Public Domain Media Search Engine Public Domain Search}

Alfred Stieglitz - Music – A Sequence of Ten Cloud Photographs, No. 1

Alfred Stieglitz was an American photographer and modern art promoter. He was born in Hoboken, New Jersey in 1864 and died in 1946. He is considered one of the most important figures in the history of photog More

An Unmanned Aerial Vehicle (UAV) lifts off from a catapult mechanism during a launch initiating sequence.

CAMP ROBERTS, Calif. (May. 08, 2013) An Unmanned Aerial Vehicle (UAV) lifts off from a catapult mechanism during a launch initiating sequence as part of the Research & Experimentation for Local & International More

Baltimore, MD. Strange as it may seem, many persons misspell or change the spelling of their names, from time to time. To forestall the difficulties which would ensue when Baer subsequently spelled his name Bear, the Social Security Board Records Office has set up several varieties of indexes for reference and to insure accuracy. One of these is the alphabetic code index. This is printed on flexible strips, each just wide enough for one line of type. They are printed automatically from the employee master card. The strips are in partially perforated rolls when they first are printed, as shown in the above photograph taken in the Records Office. The perforations allow strips to be separated at any point so that, for example, Abraham Abel's name may be inserted in proper alphabetic sequence between Aaron Abel and Adam Abel

Public domain historical photo, free to use, no copyright restrictions image - Picryl description

There is nothing "hit or miss" about the handling of account applications in the Social Security Board Records Office. To facilitate keeping a constant check on each, applications are grouped in blocks of 1,000, numbered in sequence, before they are started through the various operations necessary to set up an individual ledger account for every worker. The photograph above shows workers in the Records Office assembling applications in to blocks of 1,000.

A black and white photo of a group of men sitting at a table. Public domain portrait photograph, free to use, no copyright restrictions image - Picryl description

Baltimore, MD. Every individual Social Security Account is listed in several ways in the Social Security Board Records Office. The photograph above shows a Records Office worker at a machine which is listing in numerical sequence on a loose leaf ledger page a record of account numbers issued, to whom they were issued and other identifying data for future reference as one of the several means employed to make certain individual wage record accounts are correctly set up to be maintained

Public domain photograph of people in office, interior, the 1910s-1920s America, free to use, no copyright restrictions image - Picryl description

House erection. First panel off the truck is made into an easel for the other panels. The panels will be unloaded in sequence for erection to avoid handling. Southeast Missouri Farms Project

Picryl description: Public domain image of a construction site, wooden frame, timber, free to use, no copyright restrictions.

Sequence story of the Old Apple Tree and other work of Homer Tate. Safford, Arizona

Public domain photograph of America during the Great Depression, 1930s, free to use, no copyright restrictions image - Picryl description

Production. Veneer for aircraft and other war essentials. Veneer for combat planes. In the "half-round method," a half log, after being heated in water to the proper temperature, is bolted on a stay log and revolved against a stationary knife. The sheets, as they fall from the knife, are stacked in proper sequence just as they were in the log. Louisville, Kentucky

Picryl description: Public domain photograph of lumber, lumberjack workers, 1930s, Great Depression, economic conditions, free to use, no copyright restrictions.

Production. Veneer for aircraft and other war essentials. Veneer for combat planes. In the "half-round method," a half log, after being heated in water to the proper temperature, is bolted on a stay log and revolved against a stationary knife. The sheets, as they fall from the knife, are stacked in proper sequence just as they were in the log. Louisville, Kentucky

Public domain photograph of 1930s-1940s industrial development, no copyright restrictions image - Picryl description

Production. Veneer for aircraft and other war essentials. Veneer for combat planes. In the "half-round method," a half log, after being heated in water to the proper temperature, is bolted on a stay log and revolved against a stationary knife. The sheets, as they fall from the knife, are stacked in proper sequence just as they were in the log. Louisville, Kentucky

Picryl description: Public domain image of a factory, plant, manufacture, assembly line, industrial facility, early 20th-century industrial architecture, free to use, no copyright restrictions.

Production. Veneer for aircraft and other war essentials. A strip of walnut veneer that will be used in a panel of a combat plane comes from the textile dryer of a Midwest plant. This operation reduces the moisture content to about eight to ten percent. Sheets are stacked in exact sequence just as they come off the knife slicer from the log. Louisville, Kentucky

Public domain photograph related to Great Depression, free to use, no copyright restrictions image - Picryl description

Production. Veneer for aircraft and other war essentials. Veneer for combat planes. In the "half-round method," a half log, after being heated in water to the proper temperature, is bolted on a stay log and revolved against a stationary knife. The sheets, as they fall from the knife, are stacked in proper sequence just as they were in the log. Louisville, Kentucky

Picryl description: Public domain image of an industrial building, factory, workshop, workers, 19th-20th century, free to use, no copyright restrictions.

Production. Veneer for aircraft and other war essentials. A strip of walnut veneer that will be used in a panel of a combat plane comes from the textile dryer of a Midwest plant. This operation reduces the moisture content to about eight to ten percent. Sheets are stacked in exact sequence just as they come off the knife slicer from the log. Louisville, Kentucky

Public domain photograph of 1930s working-class Americans, free to use, no copyright restrictions image - Picryl description

184-inch cyclotron coil winding sequence. Note Fleischer sanding joint. William Brobeck to the right of paper insulation table, taken April 1, 1942. Principal Investigator/Project: Analog Conversion Project [Photographer: Donald Cooksey]

Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman applies tape to hold the gap filler in place on the orbiter Discovery while the glue dries. Looking on is quality inspector Travis Schlingman. Discovery is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence. KSC-05pd2603

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Dell Chapman applies tape to hold the gap filler in place on the orbiter Discovery while the glue dries. Looking on is quality inspector Travis S More

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Larry Tanner pulls strips of gap filler to install on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence. KSC-05pd2593

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Larry Tanner pulls strips of gap filler to install on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA More

KENNEDY SPACE CENTER, FLA. - Leaders from space agencies around the world take a moment from the International Space Station Heads of Agency meeting being held at Kennedy Space Center for a group portrait, framed by the space shuttle launch pads in Launch Complex 39. From left are Canadian Space Agency Vice-President Space Science, Technology and Programs Virendra Jha; Russian Federal Space Agency Head Anatolii Perminov; European Space Agency Director-General Jean-Jacques Dordain; NASA Administrator Michael Griffin; and Japan Aerospace Exploration Agency President Keiji Tachikawa. The purpose of the meeting is to review International Space Station cooperation and endorse a revision to the station configuration and assembly sequence. KSC-06pd0414

KENNEDY SPACE CENTER, FLA. - Leaders from space agencies around the world take a moment from the International Space Station Heads of Agency meeting being held at Kennedy Space Center for a group portrait, fra More

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Larry Tanner makes a fit check on the piece of gap filler to be installed on the orbiter Discovery, which is being processed in Orbiter Processing Facility Bay 3 at NASA’s Kennedy Space Center. This work is being performed due to two gap fillers that were protruding from the underside of Discovery on the first Return to Flight mission, STS-114. New installation procedures have been developed to ensure the gap fillers stay in place and do not pose any hazard during the shuttle's re-entry to the atmosphere. Discovery is the scheduled orbiter for the second space shuttle mission in the return-to-flight sequence. KSC-05pd2596

KENNEDY SPACE CENTER, FLA. -- United Space Alliance technician Larry Tanner makes a fit check on the piece of gap filler to be installed on the orbiter Discovery, which is being processed in Orbiter Processin More

Planning next step in Bio-Organic group's study of opium alkaloids. Project leader Henry Rapoport, second from left explores possible approaches with group members. Left to right: Robert Martin, Isamu Murakoshi, Masao Honjoh. Notations on blackboard show the hydropenanthrene sequence, demonstrated in earlier work by the group. Photo taken August 1962. Morgue 1962-97 (P-1). [Photographer: Donald Cooksey]

Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Ion house platform sequence with Foss Crosby. Photograph taken February 1, 1965. Bevatron-3738 – Photographer: George Kagawa

Digital Preservation File Name and Format: 434-LB-6-XBD201306-03139.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Ion house platform sequence with Foss Crosby. Photograph taken February 1, 1965. Bevatron-3730 – Photographer: George Kagawa

Digital Preservation File Name and Format: 434-LB-6-XBD201306-03137.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Ion house platform sequence with Foss Crosby. Photograph taken February 1, 1965. Bevatron-3734 – Photographer: George Kagawa

Digital Preservation File Name and Format: 434-LB-6-XBD201306-03138.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Sequence 6 of 22 showing the lift-off and explosion of A/C-5. 65C-1227.6

Sequence 6 of 22 showing the lift-off and explosion of A/C-5.

GEMINI PARACHUTE LANDING SEQUENCE - CHART - MSC

S65-05398 (1965) --- Artist concept of Gemini parachute landing sequence from high altitude drogue chute deployed to jettison of chute.

A sequence of reconnaissance photos of the different stages of the Hanoi/Doumer highway-railroad bridge, 1.7 miles northeast of Hanoi after an air strike. The top photo shows the bridge with one span dropped after the Aug. 11 strike. The middle print reveals the span repaired on Oct. 21 and the last photo shows the two spans dropped during the raids on Oct. 25

The original finding aid described this photograph as: Base: Hanoi Country: Viet Nam (VNM) Scene Camera Operator: Unknown Release Status: Released to Public Combined Military Service Digital Photographic Files