visibility Similar

EXPERIMENT INSTALLATION IN WEST END OF TANK 5 SCATSAT TEST OBJECT

STS081-370-023 - STS-081 - View in the Docking module shortly before hatch closing

GIMBAL SYSTEM STRUCTURE MOUNTED ON C210

Technicians X-ray a United Technologies Chemical Systems Division solid-propellant rocket motor prior to testing at the Arnold Engineering Development Center. The rocket will be used as the main propulsion unit for the Space Shuttle's Inertial Upper Stage

Wake Shield Facility on test stand at JSC

STS100-342-032 - STS-100 - Commander Rominger reads a checklist on the middeck of Endeavour during STS-100

VANDENBERG AIR FORCE BASE, Calif. -- At NASA's Space Launch Complex-2 on Vandenberg Air Force Base in California, spacecraft technicians position the interstage of the United Launch Alliance Delta II that will carry NASA's National Polar-orbiting Operational Environmental Satellite System Preparatory Project (NPP) satellite into space onto the rocket's first stage. The interstage provides an interface between the launch vehicle's first and second stages. NPP represents a critical first step in building the next-generation of Earth-observing satellites. NPP will carry the first of the new sensors developed for this satellite fleet, now known as the Joint Polar Satellite System (JPSS) to be launched in 2016. NPP is the bridge between NASA's Earth Observing System (EOS) satellites and the forthcoming series of JPSS satellites. The mission will test key technologies and instruments for the JPSS missions. For more information, visit http://www.nasa.gov/NPP. Photo credit: NASA/VAFB, Rudy Bledsoe KSC-2011-6566

MATING OF THE MULTI-PURPOSE CREW VEHICLE STAGE ADAPTER (MSA) WITH ITS DIAPHRAGM IN BLDG. 4708. DECEMBER 20, 2014. 1301445

STEREO (Solar TErrestrial RElations Observatory) SPACECRAFT SHIPPING

code Related

MATING OF THE MULTI-PURPOSE CREW VEHICLE STAGE ADAPTER (MSA) WITH ITS DIAPHRAGM IN BLDG. 4708. DECEMBER 20, 2014. 1301446

description

Summary

MATING OF THE MULTI-PURPOSE CREW VEHICLE STAGE ADAPTER (MSA) WITH ITS DIAPHRAGM IN BLDG. 4708. DECEMBER 20, 2014.

Nothing Found.

label_outline

Tags

msa multi purpose crew vehicle stage adapter diaphragm orion msfc fred deaton marshall space flight center mating multi purpose crew vehicle stage adapter high resolution nasa
date_range

Date

20/12/2013
place

Location

Marshall Spaceflight Center, Huntsville, Madison County, Alabama, United States, 35808 ,  34.63076, -86.66505
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Multi Purpose Crew Vehicle Stage Adapter, Diaphragm, Msa

Senior Airman Joshua Semrock from the 179th Airlift

Marshall Space Flight Center, Saturn Propulsion & Structural Test Facility, East Test Area, Huntsville, Madison County, AL

STS106-372-019 - STS-106 - Views of the Node 1 hatch to PMA2 taken during STS-106 mission

Saturn V - Saturn Apollo Program

International Space Station Sports a New Truss

Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

Ultraviolet Panorama - Skylab Experiment S183

CAPE CANAVERAL, Fla. – A view from above inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, shows the service module for the Orion spacecraft secured to a work stand. Technicians are preparing the three fairings for installation around the service module. The Orion spacecraft is being prepared for its first unpiloted flight test, Exploration Flight Test-1, or EFT-1, scheduled for launch atop a Delta IV rocket in September 2014. The Orion spacecraft is designed to carry astronauts to destinations not yet explored by humans. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. Orion is scheduled to launch atop NASA’s Space Launch System rocket in 2017. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Daniel Casper KSC-2013-4524

KENNEDY SPACE CENTER, FLA. -- Boeing technicians move a piece of hardware into position on Node 1 of the International Space Station (ISS) in KSC's Space Station Processing Facility in preparation for mating with Pressurized Mating Adapter (PMA)-2. The node is the first element of the ISS to be manufactured in the United States and is currently scheduled to lift off aboard the Space Shuttle Endeavour on STS-88 later this year, along with PMAs 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, Node 1 will function as a connecting passageway to the living and working areas of the ISS. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements KSC-98pc539

Members of the STS-92 crew look over the payload (left) in Space Shuttle Discovery’s payload bay. Left to right, in masks, are Mission Specialists Leroy Chiao, Peter J.K. “Jeff” Wisoff and William S. McArthur Jr. They and the other crew members Commander Brian Duffy, Pilot Pamela Ann Melroy and Mission Specialists Koichi Wakata of Japan, and Michael E. Lopez-Alegria are preparing for launch on Oct. 5, 2000. The mission is the fifth flight for the construction of the International Space Station. The payload includes the Integrated Truss Structure Z-1 and the third Pressurized Mating Adapter. During the 11-day mission, four extravehicular activities (EVAs), or space walks, are planned KSC-00pp1472

HEROES PAYLOAD AWAITS LAUNCH AS HELIUM BALLOON INFLATES IN BACKGROUND, FORT SUMNER, NEW MEXICO, SEPTEMBER 21, 2013 1301100

NASA Space Science. NASA public domain image colelction.

Topics

msa multi purpose crew vehicle stage adapter diaphragm orion msfc fred deaton marshall space flight center mating multi purpose crew vehicle stage adapter high resolution nasa