5,124 Step Image: PICRYL - Public Domain Media Search Engine Public Domain Search}

Production. A-31 ("Vengeance") dive bombers. Drilling rivet holes in the side panel of the aft monocoque. Using a hand drill, the young woman in this scene is drilling rivet holes in the side panel of the aft monocoque, a step in the fabrication process of manufacturing Vultee "Vengeance" dive bombers at the Nashville Division of Vultee Aircraft Inc. The "Vengeance" (A-31) was originally designed for the French. It was later adopted by the RAF (Royal Air Force) and still later by the U.S. Army Air Forces. It is a single-engine, low-wing plane, carrying a crew of two men and having six machine guns of varying calibers

Picryl description: Public domain image of a bomber aircraft, military aviation, air forces, free to use, no copyright restrictions.

Parke, Davis and Company, manufacturing chemists, Detroit, Michigan. A step in the manufacture of blood plasma

Public domain photograph of indoor, interior activity, America in the 1930s, free to use, no copyright restrictions image - Picryl description

War wagon trailer. Government workers in Washington, D.C., step from the war wagon trailer sponsored by the Office of Defense Transporation. Built on a steel frame, the coach is made principally of wood and masonite. It is only twelve feet long and seven feet wide and has a seating capacity of twenty-four, as contrasted to the average city bus that seats forty passengers and is approximately thirty-two feet long and eight feet wide

Picryl description: Public domain historical photo of Washington DC during the First World War, free to use, no copyright restrictions image.

Steel-saving glass-top jars recommended by the War Production Board, Containers Division, for home canning of the Victory garden fruits and vegetables in 1943. First step in sealing a jar is to fit the wet, sterilized rubber ring around the projection on the underside of the glass lid, also sterilized

Public domain photograph related to Great Depression, free to use, no copyright restrictions image - Picryl description

Steel-saving glass-top jars recommended by the War Production Board, Containers Division, for home canning of the Victory garden fruits and vegetables in 1943. Third step is to allow expanding air inside the jar to escape during the processing; the screw band should be turned as far as it will go and then turned back about a quarter of a turn. Immediately after processing, the screw band must be made as tight as possible, to ensure a perfect seal. The jar is then set aside, in an upright position, to cool

Public domain photograph of 1930s America, free to use, no copyright restrictions image - Picryl description

Flooding - Mauston, Wis. , November 8, 2010 -- November 8, 2010, Mauston, WI- Jim Roche, center, Deputy Public Assistance lead, conducts a kickoff meeting with Juneau County officials. The kickoff meeting is the second step in the Public Assistance process, where theory and speculation produce numbers and facts. Photo by Ed Edahl/FEMA

The original database describes this as: Title: DR-1944-WI Production Date: 11/08/2010 Caption: Mauston, Wis. , November 8, 2010 -- November 8, 2010, Mauston, WI- Jim Roche, center, Deputy Public Assistance More

[Group of Children at Door Step]

[Group of Children at Door Step] - [FRA-2029] Public domain photograph - French children, free to use, no copyright restrictions image - Picryl description

Egypt. Pyramids. The Step Pyramid at Sakkara

Public domain image of Egyptian art, free to use, no copyright restrictions photo - Picryl description

Photograph of a Step in the Processing of Oak Flooring at the Padgett-Smith Flooring Company Mill at Mt. View, Missouri

Original caption: A step in the processing of oak flooring. Padgett-Smith Flooring Co. Mill. Historic Photographs

CAPE CANAVERAL, Fla. – The first stage ignited on NASA’s Ares I-X test rocket at Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. The rocket produces 2.96 million pounds of thrust at liftoff and reaches a speed of 100 mph in eight seconds. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/Sandra Joseph and Kevin O'Connell KSC-2009-5987

CAPE CANAVERAL, Fla. – The first stage ignited on NASA’s Ares I-X test rocket at Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. The rocket produces 2.96 million pounds of More

CAPE CANAVERAL, Fla. – In the Atlantic Ocean off the coast of NASA's Kennedy Space Center in Florida, United Space Alliance Recovery Operations personnel pull a colorful main parachute for the Ares I-X rocket onto the deck of the solid rocket booster recovery ship Freedom Star following the launch of the flight test mission. Liftoff of the 6-minute flight test was at 11:30 a.m. EDT Oct. 28. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: United Space Alliance KSC-2009-5999

CAPE CANAVERAL, Fla. – In the Atlantic Ocean off the coast of NASA's Kennedy Space Center in Florida, United Space Alliance Recovery Operations personnel pull a colorful main parachute for the Ares I-X rocket o More

CAPE CANAVERAL, Fla. - With more than 12 times the thrust produced by a Boeing 747 jet aircraft, the Constellation Program's Ares I-X test rocket roars off Launch Complex 39B at NASA's Kennedy Space Center in Florida. The rocket produces 2.96 million pounds of thrust at liftoff and goes supersonic in 39 seconds. Liftoff of the 6-minute flight test was at 11:30 a.m. EDT Oct. 28. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/Jim Grossmann KSC-2009-5933

CAPE CANAVERAL, Fla. - With more than 12 times the thrust produced by a Boeing 747 jet aircraft, the Constellation Program's Ares I-X test rocket roars off Launch Complex 39B at NASA's Kennedy Space Center in F More

CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility remove the protective cover from the Wide Field Camera 3, or WFC3. The WFC3 is part of the payload on space shuttle Atlantis for the fifth and final Hubble servicing mission, STS-125. As Hubble enters the last stage of its life, WFC3 will be Hubble's next evolutionary step, allowing Hubble to peer ever further into the mysteries of the cosmos. WFC3 will study a diverse range of objects and phenomena, from young and extremely distant galaxies, to much more nearby stellar systems, to objects within our very own solar system. WFC3 will take the place of Wide Field Planetary Camera 2, which astronauts will bring back to Earth aboard the shuttle. Launch of Atlantis is targeted at 1:34 a.m. EDT Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2450

CAPE CANAVERAL, Fla. – Technicians in the Payload Hazardous Servicing Facility remove the protective cover from the Wide Field Camera 3, or WFC3. The WFC3 is part of the payload on space shuttle Atlantis for More

CAPE CANAVERAL, Fla. – At Hangar AF on Cape Canaveral Air Force Station in Florida, workers prepare to inspect the spent first stage of NASA's Ares I-X rocket, secured in a slip. The booster was recovered by the solid rocket booster recovery ship Freedom Star after it splashed down in the Atlantic Ocean following its flight test. Liftoff of the 6-minute flight test was at 11:30 a.m. EDT Oct. 28. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/Kim Shiflett KSC-2009-6031

CAPE CANAVERAL, Fla. – At Hangar AF on Cape Canaveral Air Force Station in Florida, workers prepare to inspect the spent first stage of NASA's Ares I-X rocket, secured in a slip. The booster was recovered by t More

CAPE CANAVERAL, Fla. – NASA's Ares I-X test rocket ignites its first stage at Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. The Constellation Program's 327-foot-tall rocket produces 2.96 million pounds of thrust at liftoff and reaches a speed of 100 mph in eight seconds. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/ George Roberts and Tony Gray KSC-2009-5968

CAPE CANAVERAL, Fla. – NASA's Ares I-X test rocket ignites its first stage at Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. The Constellation Program's 327-foot-tall roc More

CAPE CANAVERAL, Fla. – After rotation of the Wide Field Camera 3 (background left), or WFC3, in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, technicians check the data. The WFC3 will be transferred to the Super Lightweight Interchangeable Carrier. WFC3 is part of the payload on space shuttle Atlantis' STS-125 mission for the fifth and final Hubble servicing flight to NASA's Hubble Space Telescope. The curved edge shown at top is the radiator, the "outside" of WFC3 that will be exposed to space and will expel heat out of Hubble and into space through black body radiation. As Hubble enters the last stage of its life, WFC3 will be Hubble's next evolutionary step, allowing Hubble to peer ever further into the mysteries of the cosmos. WFC3 will study a diverse range of objects and phenomena, from young and extremely distant galaxies, to much more nearby stellar systems, to objects within our very own solar system. WFC3 will take the place of Wide Field Planetary Camera 2, which astronauts will bring back to Earth aboard the shuttle. Launch of Atlantis is targeted at 1:34 a.m. EDT Oct. 8. Photo credit: NASA/Amanda Diller KSC-08pd2467

CAPE CANAVERAL, Fla. – After rotation of the Wide Field Camera 3 (background left), or WFC3, in the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, technicians check the data. The WFC3 wi More

CAPE CANAVERAL, Fla. - With more than 23 times the power output of the Hoover Dam, NASA’s Ares I-X test rocket soars into blue skies above Launch Pad 39B at NASA's Kennedy Space Center in Florida. The rocket produces 2.96 million pounds of thrust at liftoff and reaches a speed of 100 mph in eight seconds. Liftoff of the 6-minute flight test was at 11:30 a.m. EDT Oct. 28. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/Sandra Joseph and Kevin O'Connel KSC-2009-6008

CAPE CANAVERAL, Fla. - With more than 23 times the power output of the Hoover Dam, NASA’s Ares I-X test rocket soars into blue skies above Launch Pad 39B at NASA's Kennedy Space Center in Florida. The rocket p More

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery nears its destination on its rollout to Launch Pad 39B. Discovery rests on top of the mobile launcher platform, which is carried by the crawler-transporter underneath. First motion of the shuttle leaving NASA's Vehicle Assembly Building was at 12:45 p.m. EDT. The 4.2-mile journey from the VAB to the pad takes approximately 8 hours. The rollout is an important step before launch of Discovery on mission STS-121 to the International Space Station. Discovery's launch is targeted for July 1 in a launch window that extends to July 19. During the 12-day mission, Discovery's crew will test new hardware and techniques to improve shuttle safety, as well as deliver supplies and make repairs to the station. Photo credit: NASA/Dimitri Gerondidakis KSC-06pd0905

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery nears its destination on its rollout to Launch Pad 39B. Discovery rests on top of the mobile launcher platform, which is carried by the crawler-transporte More

KENNEDY SPACE CENTER, FLA. -- Amid the glow of lights from the fixed and rotating service structures, Space Shuttle Discovery rests on the hardstand of Launch Pad 39B at NASA's Kennedy Space Center after completing the 4.2-mile journey from the Vehicle Assembly Building. First motion was at 12:45 p.m. EDT. The shuttle rests on a mobile launcher platform. The rollout is an important step before launch of Discovery on mission STS-121 to the International Space Station. First motion of the shuttle leaving NASA's Vehicle Assembly Building was at 12:45 p.m. EDT. Discovery's launch is targeted for July 1 in a launch window that extends to July 19. During the 12-day mission, Discovery's crew will test new hardware and techniques to improve shuttle safety, as well as deliver supplies and make repairs to the station. Photo credit: NASA/Ken Thornsley KSC-06pd0899

KENNEDY SPACE CENTER, FLA. -- Amid the glow of lights from the fixed and rotating service structures, Space Shuttle Discovery rests on the hardstand of Launch Pad 39B at NASA's Kennedy Space Center after compl More

CAPE CANAVERAL, Fla. – The Ares I-X test rocket launches into a bright Florida sky from Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. NASA’s Constellation Program's 327-foot-tall rocket produces 2.96 million pounds of thrust at liftoff and reaches a speed of 100 mph in eight seconds. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/George Roberts and Tom Farrar KSC-2009-5973

CAPE CANAVERAL, Fla. – The Ares I-X test rocket launches into a bright Florida sky from Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. NASA’s Constellation Program's 327- More

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery rolls toward Launch Pad 39B. Launch Pad 39A is in the background. The shuttle rests on a mobile launcher platform that sits atop a crawler-transporter. First motion from NASA's Vehicle Assembly Building was at 12:45 p.m. EDT. The rollout is an important step before launch of Discovery on mission STS-121 to the International Space Station. Discovery's launch is targeted for July 1 in a launch window that extends to July 19. During the 12-day mission, Discovery's crew will test new hardware and techniques to improve shuttle safety, as well as deliver supplies and make repairs to the station. Photo credit: NASA/George Shelton KSC-06pd0883

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Discovery rolls toward Launch Pad 39B. Launch Pad 39A is in the background. The shuttle rests on a mobile launcher platform that sits atop a crawler-transporter. More

Planning next step in Bio-Organic group's study of opium alkaloids. Project leader Henry Rapoport, second from left explores possible approaches with group members. Left to right: Robert Martin, Isamu Murakoshi, Masao Honjoh. Notations on blackboard show the hydropenanthrene sequence, demonstrated in earlier work by the group. Photo taken August 1962. Morgue 1962-97 (P-1). [Photographer: Donald Cooksey]

Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Schirra and Cooper step from Transfer van

S62-06008 (3 Oct. 1962) --- Astronaut Walter M. Schirra Jr., pilot of the Mercury-Atlas 8 (MA-8) Earth-orbital spaceflight, steps from a transport van as he arrives at Cape Canaveral's Pad 14 during the MA-8 pr More

Photograph of First Step in Throwing a Canoe Tilted on Sides

Original caption: First step in throwing a canoe tilted on sides. Historic Photographs

RECOVERY (PRIME CREW STEP OUT) - GEMINI-TITAN (GT)-5 - FROGMEN - ATLANTIC

S65-51653 (29 Aug. 1965) --- Astronauts L. Gordon Cooper Jr. and Charles Conrad Jr. exit their spacecraft after splashdown of the Gemini-5 spacecraft. They are photographed boarding a life raft with the help of More

The Gemini 12 astronauts James Lovell and Edwin Aldrin lifted off aboard a Titan launch vehicle from the Kennedy Space Center on November 11, 1966, an hour and a half after their Agena target vehicle was orbited by an Atlas rocket. Launched atop an Atlas booster, the Agena target vehicle (ATV) was a spacecraft used by NASA to develop and practice orbital space rendezvous and docking techniques in preparation for the Apollo program lunar missions. The objective was for Agena and Gemini to rendezvous in space and practice docking procedures. An intermediate step between Project Mercury and the Apollo Program, the Gemini Program's major objectives were to subject two men and supporting equipment to long duration flights, to perfect rendezvous and docking with other orbiting vehicles, methods of reentry, and landing of the spacecraft. n/a

The Gemini 12 astronauts James Lovell and Edwin Aldrin lifted off aboard a Titan launch vehicle from the Kennedy Space Center on November 11, 1966, an hour and a half after their Agena target vehicle was orbite More

Launched atop an Atlas booster, the Agena target vehicle (ATV) was a spacecraft used by NASA to develop and practice orbital space rendezvous and docking techniques in preparation for the Apollo program lunar missions. This particular launch preceded the Gemini 12, which launched aboard a Titan launch vehicle one and one half hours later. The objective was for Agena and Gemini to rendezvous in space and practice docking procedures. An intermediate step between Project Mercury and the Apollo Program, the Gemini Program's major objectives were to subject two men and supporting equipment to long duration flights, to perfect rendezvous and docking with other orbiting vehicles, methods of reentry, and landing of the spacecraft. n/a

Launched atop an Atlas booster, the Agena target vehicle (ATV) was a spacecraft used by NASA to develop and practice orbital space rendezvous and docking techniques in preparation for the Apollo program lunar m More

An A-1H Skyraider aircraft is lifted to a barge, the first step in becoming combat ready

The original finding aid described this photograph as: Base: Cam Ranh Bay Air Base Country: Viet Nam (VNM) Scene Camera Operator: Unknown Release Status: Released to Public Combined Military Service Digital More

Saturn IB - assembly step for the first stage (S-IB stage)

In the "clustering" procedure, an initial assembly step for the first stage (S-IB stage) of the Saturn IB launch vehicle, workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, place the fi More

KENNEDY SPACE CENTER, FLA. -- Sitting on the mobile launcher platform, Space Shuttle Discovery rolls toward Launch Pad 39B via the crawler transporter. First motion of the shuttle from NASA's Vehicle Assembly Building was at 12:45 p.m. EDT. The rollout is an important step before launch of Discovery on mission STS-121 to the International Space Station. Discovery's launch is targeted for July 1 in a launch window that extends to July 19. During the 12-day mission, Discovery's crew will test new hardware and techniques to improve shuttle safety, as well as deliver supplies and make repairs to the station. Photo credit: NASA/Dimitri Gerondidakis KSC-06pd0878

KENNEDY SPACE CENTER, FLA. -- Sitting on the mobile launcher platform, Space Shuttle Discovery rolls toward Launch Pad 39B via the crawler transporter. First motion of the shuttle from NASA's Vehicle Assemb More

CAPE CANAVERAL, Fla. -- The interior of NASA's new mobile launcher, or ML, support structure is outfitted with solid steel flooring, lights, air conditioning, electrical boxes and sprinkler piping at NASA's Kennedy Space Center in Florida. The 355-foot-tall structure will support NASA's future human spaceflight program. The base of the launcher is lighter than space shuttle mobile launcher platforms so the crawler-transporter can pick up the heavier load of the tower and a taller rocket. The next step will be to add ground support equipment, such as umbilicals and access arms, for future rocket launches. For information on NASA's future plans, visit www.nasa.gov. Photo credit: NASA/Kim Shiflett KSC-2010-4436

CAPE CANAVERAL, Fla. -- The interior of NASA's new mobile launcher, or ML, support structure is outfitted with solid steel flooring, lights, air conditioning, electrical boxes and sprinkler piping at NASA's Ken More

CAPE CANAVERAL, Fla. -- This panoramic view shows NASA's new mobile launcher, or ML, support structure standing tall at NASA's Kennedy Space Center in Florida. It took about two years to construct the launcher in the Mobile Launcher Park site, north of the Vehicle Assembly Building, or VAB. The 355-foot-tall structure will support NASA's future human spaceflight program. The base of the launcher is lighter than space shuttle mobile launcher platforms so the crawler-transporter can pick up the heavier load of the tower and a taller rocket. The next step will be to add ground support equipment, such as umbilicals and access arms, for future rocket launches. For information on NASA's future plans, visit www.nasa.gov. Photo credit: NASA/Frankie Martin KSC-2010-4455

CAPE CANAVERAL, Fla. -- This panoramic view shows NASA's new mobile launcher, or ML, support structure standing tall at NASA's Kennedy Space Center in Florida. It took about two years to construct the launcher More

Apollo 14 crewmen step aboard U.S.S. New Orleans after splashdown

S71-19473 (9 Feb. 1971) --- The Apollo 14 crew members step aboard the USS New Orleans, after exiting a U.S. Navy helicopter which retrieved the three from their splashdown site not far away. From left to right More

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

SIX STEP PROGRAM MEMBERS, NASA Technology Images

The original finding aid described this as: Capture Date: 6/27/1975 Photographer: ANGEL TORRES Keywords: Larsen Scan Photographs Relating to Agency Activities, Facilities and Personnel

STEP BY STEP ASSEMBLY OF COMPRESSOR NO. 2

The original finding aid described this as: Capture Date: 7/15/1977 Photographer: DONALD HUEBLER Keywords: Larsen Scan Location Building No: 5 Photographs Relating to Agency Activities, Facilities and Personnel

STEP BY STEP ASSEMBLY OF COMPRESSOR NO. 2

The original finding aid described this as: Capture Date: 7/15/1977 Photographer: DONALD HUEBLER Keywords: Larsen Scan Location Building No: 5 Photographs Relating to Agency Activities, Facilities and Personnel