744 Contribution Image: PICRYL - Public Domain Media Search Engine Public Domain Search}

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, secured atop a mobile launch platform, ascends the five percent grade to the top of the hardstand on Launch Pad 39A. The rotating service structure, adjoined to the fixed service structure at left, has been rolled back in preparation for the shuttle's arrival. First motion out of the Vehicle Assembly Building was at 4:43 a.m. EST, and the shuttle was hard down on the pad at 11:51 a.m. Rollout is a milestone for Atlantis' launch to the International Space Station on mission STS-122, targeted for Dec. 6. On this mission, Atlantis will deliver the Columbus module to the International Space Station. The European Space Agency's largest contribution to the station, Columbus is a multifunctional, pressurized laboratory that will be permanently attached to U.S. Node 2, called Harmony. The module is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. The laboratory will expand the research facilities aboard the station, providing crew members and scientists from around the world the ability to conduct a variety of experiments in the physical, materials and life sciences. Photo credit: NASA/Kim Shiflett KSC-07pd3269

KENNEDY SPACE CENTER, FLA. -- Space Shuttle Atlantis, secured atop a mobile launch platform, ascends the five percent grade to the top of the hardstand on Launch Pad 39A. The rotating service structure, adjoine More

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Mission Specialist Stanley Love awaits the final adjustments on his launch and entry suit, in astronaut crew quarters. The STS-122 crew is preparing for a simulated launch countdown aboard Atlantis, part of terminal countdown demonstration test, or TCDT, activities at NASA's Kennedy Space Center. The TCDT is a dress rehearsal for launch and also provides astronauts and ground crews with equipment familiarization and emergency egress training. On mission STS-122, Atlantis will deliver the Columbus module to the International Space Station. The European Space Agency's largest single contribution to the station, Columbus is a multifunctional, pressurized laboratory that will be permanently attached to U.S. Node 2, called Harmony. The laboratory will expand the research facilities aboard the station, providing crew members and scientists from around the world the ability to conduct a variety of experiments in the physical, materials and life sciences. Launch is targeted for Dec. 6. Photo credit: NASA/Kim Shiflett KSC-07pd3408

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Mission Specialist Stanley Love awaits the final adjustments on his launch and entry suit, in astronaut crew quarters. The STS-122 crew is prepari More

KENNEDY SPACE CENTER, FLA. -- Workers on the floor of the Space Station Processing Facility maneuver ground support equipment that will be used to lift the Japanese Experiment Module (JEM) remote manipulator system. The Japanese Aerospace Exploration Agency developed the laboratory known as "Kibo" (Hope) and includes an exposed facility (platform) for space environment experiments, the RMS and two logistics modules. Japan's primary contribution to the International Space Station, it will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments. The various JEM components will be assembled in space over the course of three Shuttle missions. The JEM and RMS are scheduled to launch on mission STS-124 no earlier than February 2008. Photo credit: NASA/Dimitri Gerondidakis KSC-07pd0099

KENNEDY SPACE CENTER, FLA. -- Workers on the floor of the Space Station Processing Facility maneuver ground support equipment that will be used to lift the Japanese Experiment Module (JEM) remote manipulator s More

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Mission Specialist Hans Schlegel puts on his helmet, part of his launch and entry suit, in astronaut crew quarters. Schlegel is with the European Space Agency. The STS-122 crew is preparing for a simulated launch countdown aboard Atlantis, part of terminal countdown demonstration test, or TCDT, activities at NASA's Kennedy Space Center. The TCDT is a dress rehearsal for launch and also provides astronauts and ground crews with equipment familiarization and emergency egress training. On mission STS-122, Atlantis will deliver the Columbus module to the International Space Station. The European Space Agency's largest single contribution to the station, Columbus is a multifunctional, pressurized laboratory that will be permanently attached to U.S. Node 2, called Harmony. The laboratory will expand the research facilities aboard the station, providing crew members and scientists from around the world the ability to conduct a variety of experiments in the physical, materials and life sciences. Launch is targeted for Dec. 6. Photo credit: NASA/Kim Shiflett KSC-07pd3403

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Mission Specialist Hans Schlegel puts on his helmet, part of his launch and entry suit, in astronaut crew quarters. Schlegel is with the European S More

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Pilot Alan Poindexter, strapped in his seat in Atlantis' cockpit, signals that he is ready to proceed with the simulated launch countdown. The exercise is part of terminal countdown demonstration test, or TCDT, activities at NASA's Kennedy Space Center. The TCDT is a dress rehearsal for launch and also provides astronauts and ground crews with equipment familiarization and emergency egress training. On mission STS-122, Atlantis will deliver the Columbus module to the International Space Station. The European Space Agency's largest single contribution to the station, Columbus is a multifunctional, pressurized laboratory that will be permanently attached to U.S. Node 2, called Harmony. The laboratory will expand the research facilities aboard the station, providing crew members and scientists from around the world the ability to conduct a variety of experiments in the physical, materials and life sciences. Atlantis' launch is targeted for Dec. 6. Photo credit: NASA/Kim Shiflett KSC-07pd3441

KENNEDY SPACE CENTER, FLA. -- Space shuttle Atlantis STS-122 Pilot Alan Poindexter, strapped in his seat in Atlantis' cockpit, signals that he is ready to proceed with the simulated launch countdown. The exe More

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers attach an overhead crane to the Columbus Laboratory module. The module will be moved to a weigh station before transfer to the payload canister. The European Space Agency 's largest single contribution to the International Space Station, Columbus will expand the research facilities of the station, providing crew members and scientists around the world the ability to conduct a variety of life, physical and materials science experiments. The module is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. The module is scheduled to be transferred to Launch Pad 39A in early November, in preparation for its journey to the station. Columbus will fly aboard space shuttle Atlantis on the STS-122 mission, targeted for launch Dec. 6. Photo credit: NASA/George Shelton KSC-07pd3018

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, workers attach an overhead crane to the Columbus Laboratory module. The module will be moved to a weigh st More

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility work on a Multi-Element Integrated Test (MEIT) of the U.S. Node 2 and the Japanese Experiment Module (JEM). Node 2 attaches to the end of the U.S. Lab on the ISS and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, eventually, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. The JEM, developed by the National Space Development Agency of Japan (NASDA), is Japan's primary contribution to the Station. It will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility work on a Multi-Element Integrated Test (MEIT) of the U.S. Node 2 and the Japanese Experiment Module (JEM). Node 2 attaches More

KENNEDY SPACE CENTER, FLA. - A view of the Space Station Processing Facility shows workstands and ISS elements. The most recent additions are the Japanese Experiment Module (JEM)’s pressurized module and the Italian-built Node 2. The pressurized module is the first element of the JEM, Japan’s primary contribution to the Space Station, to be delivered to KSC. It will enhance the unique research capabilities of the orbiting complex by providing an additional shirt-sleeve environment for astronauts to conduct science experiments. Node 2 will be installed on the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS.

KENNEDY SPACE CENTER, FLA. - A view of the Space Station Processing Facility shows workstands and ISS elements. The most recent additions are the Japanese Experiment Module (JEM)’s pressurized module and the More

A memorial bust honoring General (GEN) Anthony C. McAulliffe for his contribution during World War II

The original finding aid described this photograph as: Base: Bastogne Country: Belgium (BEL) Scene Camera Operator: SPC 5 Ronald J. Cavalier Release Status: Released to Public Combined Military Service Digi More

General view of the Soviet military display at the Memorial Complex of the Ukrainian State. On the hillside above the display (left) the Memorial flame, which is lighted on special occasions honoring the military's contribution to Soviet life, can be seen

The original finding aid described this photograph as: Base: Kiev Country: U.S.S.R. (SUN) Scene Camera Operator: Don S. Montgomery, USN (Ret.) Release Status: Released to Public Combined Military Service Di More

A chart depicting the contribution of allied nations to the US and Soviet naval balance on the worldwide major combatant force level during the period 1980-1987

The original finding aid described this photograph as: Base: Unknown Scene Camera Operator: Unknown Release Status: Released to Public Combined Military Service Digital Photographic Files

A master chief petty officer presents a contribution to CHIEF of Naval Operations Adm. Carlisle A.H. Trost during the admiral's visit to the headquarters of the Iceland Defense Force

The original finding aid described this photograph as: Base: Naval Air Station, Keflavik Country: Iceland (ISL) Scene Camera Operator: PH1 Porter Release Status: Released to Public Combined Military Service More

A stern view of the Japanese Maritime Self Defense Force fleet support ship Tokiwa (AOE-423) preparing to dock. The Tokiwa delivered non-combatant material as part of Japan's contribution to the coalition effort in Operation Desert Storm

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Bahrain (BHR) Scene Camera Operator: PH2 Rudy D. Pahoyo Release Status: Released to Public Combined Mil More

A starboard bow view of the Japanese Maritime Self Defense Force fleet support ship Tokiwa (AOE-423) preparing to dock. The Tokiwa delivered non-combatant material as part of Japan's contribution to thte coalition effort in Operation Desert Storm.'

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Bahrain (BHR) Scene Camera Operator: PH2 Rudy D. Pahoyo Release Status: Released to Public Combined Mil More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, presents the Legion of Merit to MAJ. GEN. Muhammed Said Al-Badi, chief of staff, United Arab Emirates armed forces, for his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Qatar(QAT) Scene Camera Operator: STAFF SGT. Dean Wagner Release Status: Released to Public Combined Mi More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, congratulates MAJ. GEN. Muhammed Said Al-Badi, chief of staff, United Arab Emirates armed forces, after presenting him with the Legion of Merit for his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Qatar(QAT) Scene Camera Operator: STAFF SGT. Dean Wagner Release Status: Released to Public Combined Mi More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, congratulates MAJ. GEN. Muhammed Said Al-Badi, chief of staff, United Arab Emirates armed forces, after presenting him with the Legion of Merit for his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Qatar(QAT) Scene Camera Operator: STAFF SGT. Dean Wagner Release Status: Released to Public Combined Mi More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, presents the Legion of Merit to MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces, in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: SSGT. Dean W. Wagner Release Status: Released to Public Combined Mil More

Edward W. Gnehm Jr., U.S. ambassador to Kuwait, military officers and Kuwaiti dignitaries attend an awards ceremony during which GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, is presenting the Legion of Merit to MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces. The Kuwaiti officer is receiving the award in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: SSGT. Dean W. Wagner Release Status: Released to Public Combined Mil More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, stands beside MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces during an awards presentation ceremony. Schwarzkopf will present the Legion of Merit to the Kuwaiti officer in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: STAFF SGT. Dean W. Wagner Release Status: Released to Public Combine More

A speaker prepares to introduce GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, during an awards presentation ceremony for MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces. Schwarzkopf will present the Legion of Merit to the Kuwaiti officer in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: STAFF SGT. Dean W. Wagner Release Status: Released to Public Combine More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, walks with MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces, as the two men proceed to a state dinner following an awards presentation ceremony. Schwarzkopf presented the Legion of Merit to the Kuwaiti officer in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: SSGT. Dean Wagner Release Status: Released to Public Combined Milita More

GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command, presents the Legion of Merit to MAJ. GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces, in recognition of his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: SSGT. Dean W. Wagner Release Status: Released to Public Combined Mil More

MAJ GEN. Jaber Al-Khaled Al-Jaber Al-Sabah, commander of Kuwait military forces, presents a painting depicting the Iraqi invasion of Kuwait to GEN. Norman Schwarzkopf, commander-in-chief, U.S. Central Command. The presentation is taking place following an awards ceremony at which the Kuwaiti officer received the Legion of Merit for his contribution to coalition efforts during Operation Desert Storm.

The original finding aid described this photograph as: Subject Operation/Series: DESERT STORM Country: Kuwait(KWT) Scene Camera Operator: SSGT. Dean Wagner Release Status: Released to Public Combined Milita More

German Army soldiers onboard an armored personnel carrier (APC) on hand for the dedication of a well which they dug for the Somalis. Germany's Defense Minister dedicated the well as part of his nations contribution to the relief effort

The original finding aid described this photograph as: Subject Operation/Series: UNOSOM II Base: Mataban Country: Somalia (SOM) Scene Camera Operator: STAFF SGT. Jeffrey T. Brady Release Status: Released t More

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launch Complex 40 on Cape Canaveral Air Station. After a 2.2-billion mile journey that will include two swingbys of Venus and one of Earth to gain additional velocity, the two-story tall spacecraft will arrive at Saturn in July 2004. The orbiter will circle the planet for four years, its complement of 12 scientific instruments gathering data about Saturn's atmosphere, rings and magnetosphere and conducting closeup observations of the Saturnian moons. Huygens, with a separate suite of six science instruments, will separate from Cassini to fly on a ballistic trajectory toward Titan, the only celestial body besides Earth to have an atmosphere rich in nitrogen. Scientists are eager to study further this chemical similarity in hopes of learning more about the origins of our own planet Earth. Huygens will provide the first direct sampling of Titan's atmospheric chemistry and the first detailed photographs of its surface. The Cassini mission is an international effort involving NASA, the European Space Agency (ESA) and the Italian Space Agency, Agenzia Spaziale Italiana (ASI). The Jet Propulsion Laboratory manages the U.S. contribution to the mission for NASA's Office of Space Science. The major U.S. contractor is Lockheed Martin, which provided the launch vehicle and upper stage, spacecraft propulsion module and radioisotope thermoelectric generators that will provide power for the spacecraft. The Titan IV/Centaur is a U.S. Air Force launch vehicle, and launch operations were managed by the 45th Space Wing KSC-97PC1545

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launc More

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. This spectacular streak shot was taken from Hangar AF on Cape Canaveral Air Station, with a solid rocket booster retrieval ship in the foreground. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launch Complex 40 on Cape Canaveral Air Station. After a 2.2-billion mile journey that will include two swingbys of Venus and one of Earth to gain additional velocity, the two-story tall spacecraft will arrive at Saturn in July 2004. The orbiter will circle the planet for four years, its complement of 12 scientific instruments gathering data about Saturn's atmosphere, rings and magnetosphere and conducting closeup observations of the Saturnian moons. Huygens, with a separate suite of six science instruments, will separate from Cassini to fly on a ballistic trajectory toward Titan, the only celestial body besides Earth to have an atmosphere rich in nitrogen. Scientists are eager to study further this chemical similarity in hopes of learning more about the origins of our own planet Earth. Huygens will provide the first direct sampling of Titan's atmospheric chemistry and the first detailed photographs of its surface. The Cassini mission is an international effort involving NASA, the European Space Agency (ESA) and the Italian Space Agency, Agenzia Spaziale Italiana (ASI). The Jet Propulsion Laboratory manages the U.S. contribution to the mission for NASA's Office of Space Science. The major U.S. contractor is Lockheed Martin, which provided the launch vehicle and upper stage, spacecraft propulsion module and radioisotope thermoelectric generators that will provide power for the spacecraft. The Titan IV/Centaur is a U.S. Air Force launch vehicle, and launch operations were managed by the 45th Space Wing KSC-97PC1543

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. This spectacular streak shot was taken from Hangar AF More

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launch Complex 40 on Cape Canaveral Air Station. After a 2.2-billion mile journey that will include two swingbys of Venus and one of Earth to gain additional velocity, the two-story tall spacecraft will arrive at Saturn in July 2004. The orbiter will circle the planet for four years, its complement of 12 scientific instruments gathering data about Saturn's atmosphere, rings and magnetosphere and conducting closeup observations of the Saturnian moons. Huygens, with a separate suite of six science instruments, will separate from Cassini to fly on a ballistic trajectory toward Titan, the only celestial body besides Earth to have an atmosphere rich in nitrogen. Scientists are eager to study further this chemical similarity in hopes of learning more about the origins of our own planet Earth. Huygens will provide the first direct sampling of Titan's atmospheric chemistry and the first detailed photographs of its surface. The Cassini mission is an international effort involving NASA, the European Space Agency (ESA) and the Italian Space Agency, Agenzia Spaziale Italiana (ASI). The Jet Propulsion Laboratory manages the U.S. contribution to the mission for NASA's Office of Space Science. The major U.S. contractor is Lockheed Martin, which provided the launch vehicle and upper stage, spacecraft propulsion module and radioisotope thermoelectric generators that will provide power for the spacecraft. The Titan IV/Centaur is a U.S. Air Force launch vehicle, and launch operations were managed by the 45th Space Wing KSC-97PC1544

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launc More

KENNEDY SPACE CENTER, FLA. -- A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launch Complex 40 on Cape Canaveral Air Station. After a 2.2-billion mile journey that will include two swingbys of Venus and one of Earth to gain additional velocity, the two-story tall spacecraft will arrive at Saturn in July 2004. The orbiter will circle the planet for four years, its complement of 12 scientific instruments gathering data about Saturn's atmosphere, rings and magnetosphere and conducting closeup observations of the Saturnian moons. Huygens, with a separate suite of six science instruments, will separate from Cassini to fly on a ballistic trajectory toward Titan, the only celestial body besides Earth to have an atmosphere rich in nitrogen. Scientists are eager to study further this chemical similarity in hopes of learning more about the origins of our own planet Earth. Huygens will provide the first direct sampling of Titan's atmospheric chemistry and the first detailed photographs of its surface. The Cassini mission is an international effort involving NASA, the European Space Agency (ESA) and the Italian Space Agency, Agenzia Spaziale Italiana (ASI). The Jet Propulsion Laboratory manages the U.S. contribution to the mission for NASA's Office of Space Science. The major U.S. contractor is Lockheed Martin, which provided the launch vehicle and upper stage, spacecraft propulsion module and radioisotope thermoelectric generators that will provide power for the spacecraft. The Titan IV/Centaur is a U.S. Air Force launch vehicle, and launch operations were managed by the 45th Space Wing KSC-97PC1546

KENNEDY SPACE CENTER, FLA. -- A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 More

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launch Complex 40 on Cape Canaveral Air Station. After a 2.2-billion mile journey that will include two swingbys of Venus and one of Earth to gain additional velocity, the two-story tall spacecraft will arrive at Saturn in July 2004. The orbiter will circle the planet for four years, its complement of 12 scientific instruments gathering data about Saturn's atmosphere, rings and magnetosphere and conducting closeup observations of the Saturnian moons. Huygens, with a separate suite of six science instruments, will separate from Cassini to fly on a ballistic trajectory toward Titan, the only celestial body besides Earth to have an atmosphere rich in nitrogen. Scientists are eager to study further this chemical similarity in hopes of learning more about the origins of our own planet Earth. Huygens will provide the first direct sampling of Titan's atmospheric chemistry and the first detailed photographs of its surface. The Cassini mission is an international effort involving NASA, the European Space Agency (ESA) and the Italian Space Agency, Agenzia Spaziale Italiana (ASI). The Jet Propulsion Laboratory manages the U.S. contribution to the mission for NASA's Office of Space Science. The major U.S. contractor is Lockheed Martin, which provided the launch vehicle and upper stage, spacecraft propulsion module and radioisotope thermoelectric generators that will provide power for the spacecraft. The Titan IV/Centaur is a U.S. Air Force launch vehicle, and launch operations were managed by the 45th Space Wing KSC-97PC1547

A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. Launch occurred at 4:43 a.m. EDT, Oct. 15, from Launc More

NASA Administrator Daniel Goldin (left), KSC Director of Shuttle Operations Robert B. Sieck (center) and Secretary of State Madeleine Albright (right) pose in the firing room of the Launch Control Center following the successful launch of Space Shuttle Endeavour on mission STS-88 at 3:35:34 a.m. EST. Sieck is wearing around his neck the Distinguished Service Medal presented him by Goldin just after launch. The medal, the highest honor NASA confers on a government employee, recognizes someone who has personally made a contribution representing substantial and extraordinary progress to the mission of NASA KSC-98pc1801

NASA Administrator Daniel Goldin (left), KSC Director of Shuttle Operations Robert B. Sieck (center) and Secretary of State Madeleine Albright (right) pose in the firing room of the Launch Control Center follow More

In a firing room of the Launch Control Center , KSC Director of Shuttle Operations Robert B. Sieck (center) shakes hands with Secretary of State Madeleine Albright (right) after the successful launch of Space Shuttle Endeavour on mission STS-88 at 3:35:34 a.m. EST. At left is NASA Administrator Daniel Goldin. Sieck is wearing around his neck the Distinguished Service Medal presented him by Goldin following the launch. The medal, the highest honor NASA confers on a government employee, recognizes someone who has personally made a contribution representing substantial and extraordinary progress to the mission of NASA KSC-98pc1803

In a firing room of the Launch Control Center , KSC Director of Shuttle Operations Robert B. Sieck (center) shakes hands with Secretary of State Madeleine Albright (right) after the successful launch of Space S More

In a firing room of the Launch Control Center, KSC Director of Shuttle Operations Robert B. Sieck (center) gives a thumbs up after the successful launch of Space Shuttle Endeavour on mission STs-88 at 3:35:34 a.m. EST. With him are NASA Administrator Daniel Goldin (left) and U.S. Secretary of State Madeleine Albright (right). Sieck is wearing around his neck the Distinguished Service Medal presented to him by Goldin following the launch. The medal, the highest honor NASA confers on a government employee, recognizes someone who has personally made a contribution representing substantial and extraordinary progress to the mission of NASA KSC-98pc1802

In a firing room of the Launch Control Center, KSC Director of Shuttle Operations Robert B. Sieck (center) gives a thumbs up after the successful launch of Space Shuttle Endeavour on mission STs-88 at 3:35:34 a More

In the firing room of the Launch Control Center after the successful launch of Space Shuttle Endeavour at 3:35:34 a.m. EST, NASA Administrator Daniel Goldin congratulates KSC Director of Shuttle Operations Robert B. Sieck, who is wearing around his neck the Distinguished Service Medal just presented him. Goldin conferred the medal, the highest honor NASA gives a government employee, which recognizes someone who has personally made a contribution representing substantial and extraordinary progress to the mission of NASA KSC-98pc1804

In the firing room of the Launch Control Center after the successful launch of Space Shuttle Endeavour at 3:35:34 a.m. EST, NASA Administrator Daniel Goldin congratulates KSC Director of Shuttle Operations Robe More

Machinist Mate 3rd Class Kenneth W. Stanfield removes a bearing while deployed on USS INCHON (MCS 12) during its recent transit through the Mediterranean Sea (Not shown). USS INCHON is currently in the Mediterranean and Adriatic, supporting Operation Allied Harbour, the joint-NATO humanitarian assistance operation. Operation Allied Harbour is bringing relief to thousands of refugees created from the recent unrest in the Kosovo region. The United States contribution to Allied Harbour is Joint Task Force (JTF) Shining Hope

The original finding aid described this photograph as: Subject Operation/Series: ALLIED HARBOUR Country: Unknown Scene Camera Operator: Ph1 Sean Jordan Release Status: Released to Public Combined Military S More

Signalman 1ST Class Vincent E. Hamilton (L) watches on as Quartermaster 3rd Class Curtis D. Pender helps plot the course of the USS INCHON (MCS 12) during its transit through the Mediterranean Sea (not shown). USS INCHON is currently in the Mediterranean and Adriatic, supporting Operation Allied Harbour, the joint-NATO humanitarian assistance operation. Operation Allied Harbour is bringing relief to thousands of refugees created from the recent unrest in the Kosovo region. The United States contribution to Allied Harbour is Joint Task Force (JTF) Shining Hope

The original finding aid described this photograph as: Subject Operation/Series: ALLIED HARBOUR Country: Unknown Scene Camera Operator: PHAA Aaron Lane Release Status: Released to Public Combined Military S More

KENNEDY SPACE CENTER, FLA. -- At the grand opening of the newly expanded KSC Visitor Complex, Center Director Roy Bridges presents Deep Space Nine star Avery Brooks with a plaque, recognizing his contribution to advancing the public's understanding of NASA and the search for life elsewhere in the universe. Brooks narrates the new film Quest for Life at the Visitor Center. The $ 13 million addition to the Visitor Complex now includes an International Space Station-themed ticket plaza, featuring a structure of overhanging solar panels and astronauts performing assembly tasks, a new information center, films, and exhibits. The KSC Visitor Complex was inaugurated three decades ago and is now one of the top five tourist attractions in Florida. It is located on S.R. 407, east of I-95, within the Merritt Island National Wildlife Refuge KSC-99pp0405

KENNEDY SPACE CENTER, FLA. -- At the grand opening of the newly expanded KSC Visitor Complex, Center Director Roy Bridges presents Deep Space Nine star Avery Brooks with a plaque, recognizing his contribution t More

KENNEDY SPACE CENTER, FLA. -- At the grand opening of the newly expanded KSC Visitor Complex, Center Director Roy Bridges presents Deep Space Nine star Avery Brooks with a plaque, NASA jacket and hat. Brooks narrates the new film Quest for Life at the Visitor Center. Brooks was recognized for his contribution to advancing the public's understanding of NASA and the search for life elsewhere in the universe. The Complex now includes an International Space Station-themed ticket plaza, featuring a structure of overhanging solar panels and astronauts performing assembly tasks, a new foyer, films, and exhibits. The KSC Visitor Complex was inaugurated three decades ago and is now one of the top five tourist attractions in Florida. It is located on S.R. 407, east of I-95, within the Merritt Island National Wildlife Refuge KSC-99pp0406

KENNEDY SPACE CENTER, FLA. -- At the grand opening of the newly expanded KSC Visitor Complex, Center Director Roy Bridges presents Deep Space Nine star Avery Brooks with a plaque, NASA jacket and hat. Brooks na More

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at the Space Station Processing Facility at KSC to begin a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pd0542

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at the Space Station Processing Facility at KSC to begin a campaign of prelaunch processing activities. CSA's first cont More

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at Kennedy Space Center to begin a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pd0541

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at Kennedy Space Center to begin a campaign of prelaunch processing activities. CSA's first contribution to the Internat More

Workers move a box containing a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) into the Space Station Processing Facility at KSC. It joins two other segments for a campaign of prelaunch processing activities CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pp0544

Workers move a box containing a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) into the Space Station Processing Facility at KSC. It joins two other segments for a More

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at the Space Station Processing Facility at KSC to begin a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pp0543

The Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) arrives at the Space Station Processing Facility at KSC to begin a campaign of prelaunch processing activities. CSA's first cont More

Segments of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) are lined up in the Space Station Processing Facility at KSC. They will undergo a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pp0548

Segments of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) are lined up in the Space Station Processing Facility at KSC. They will undergo a campaign of prelaunch processing a More

Workers uncrate a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) in the Space Station Processing Facility at KSC. It joins two other segments for a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pd0545

Workers uncrate a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) in the Space Station Processing Facility at KSC. It joins two other segments for a campaign of prel More

Workers guide a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) past the Leonardo Multi-Purpose Logistics Module in the Space Station Processing Facility at KSC. The segment joins two others for a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pp0547

Workers guide a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) past the Leonardo Multi-Purpose Logistics Module in the Space Station Processing Facility at KSC. The More

Workers guide a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) in the Space Station Processing Facility at KSC. It joins two other segments for a campaign of prelaunch processing activities. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is scheduled to be launched aboard Space Shuttle Endeavour on STS-100, currently planned for July 2000 KSC-99pd0546

Workers guide a segment of the Canadian Space Agency's (CSA) Space Station Remote Manipulator System (SSRMS) in the Space Station Processing Facility at KSC. It joins two other segments for a campaign of prelau More

Workers in the Space Station Processing Facility raise two segments of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS). CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is at KSC to begin a campaign of prelaunch processing activities. It is scheduled to be launched aboard Space Shuttle Endeavour on mission STS-100, currently planned for July 2000 KSC-99pp0570

Workers in the Space Station Processing Facility raise two segments of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS). CSA's first contribution to the International Space Station (I More

Workers in the in the Space Station Processing Facility move two segments of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS) to a workstand. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement.. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is at KSC to begin a campaign of prelaunch processing activities. It is scheduled to be launched aboard Space Shuttle Endeavour on mission STS-100, currently planned for July 2000 KSC-99pp0571

Workers in the in the Space Station Processing Facility move two segments of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS) to a workstand. CSA's first contribution to the Internati More

Workers in the Space Station Processing Facility raise a segment of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS) to move it to a workstand. CSA's first contribution to the International Space Station (ISS), the SSRMS is the primary means of transferring payloads between the orbiter payload bay and the ISS for assembly. The 56-foot-long robotic arm includes two 12-foot booms joined by a hinge. Seven joints on the arm allow highly flexible and precise movement. Latching End Effectors are mounted on each end of the arm for grappling. Video cameras mounted on the booms and end effectors will give astronauts maximum visibility for operations and maintenance tasks on the ISS. The SSRMS is at KSC to begin a campaign of prelaunch processing activities. It is scheduled to be launched aboard Space Shuttle Endeavour on mission STS-100, currently planned for July 2000 KSC-99pp0569

Workers in the Space Station Processing Facility raise a segment of the Canadian Space Agency's Space Station Remote Manipulator System (SSRMS) to move it to a workstand. CSA's first contribution to the Interna More