Similar
BIO-Plex Facility in Building 29
Workers inside the payload canister wait for the Multi-Purpose Logistics Module Raffaello to be lowered inside. It joins the Canadian robotic arm, SSRMS, already in place. Both elements are part of the payload on mission STS-100 to the International Space Station. Raffaello carries six system racks and two storage racks for the U.S. Lab. The arm has seven motorized joints and is capable of handling large payloads and assisting with docking the Space Shuttle. The SSRMS is self-relocatable with a Latching End Effector so it can be attached to complementary ports spread throughout the Station’s exterior surfaces. Launch of STS-100 is scheduled for April 19, 2001 at 2:41 p.m. EDT from Launch Pad 39A KSC-01pp0670
ESEM samples, NASA history collection
STS-132 CREW CEIT - ATLANTIS 2010-2302
STS084-305-004 - STS-084 - Interior views of the Mir Space Station
BIMOD ASSEMBLY IN THE 8X6 FOOT WIND TUNNEL SHOP - COMET ION DRIVE PROGRAM
In the Space Station Processing Facility, workers along the edge of the payload canister watch as the U.S. Lab Destiny is lowered into the canister. A key element in the construction of the International Space Station, Destiny is 28 feet long and weighs 16 tons. This research and command-and-control center is the most sophisticated and versatile space laboratory ever built. It will ultimately house a total of 23 experiment racks for crew support and scientific research. Destiny will fly on STS-98, the seventh construction flight to the ISS. Launch of STS-98 is scheduled for Jan. 19 at 2:11 a.m. EST KSC-00pp1950
KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility bay 1, workers detach the overhead crane from the Pressurized Mating Adapter -3 (PMA-3), which sits in the payload bay of the orbiter Discovery. A component of the International Space Station, the PMA-3 will fly on Shuttle mission STS-92, scheduled to launch Oct. 5. The mission will be the fifth flight to the Space Station, and the 100th Shuttle flight overall. PMA-3 provides shuttle docking port for solar array installation on flight 4A (mission STS-97 scheduled for Nov. 30), and Lab installation on flight 5A (mission STS-98, scheduled for Jan. 18, 2001) KSC00pp0880
STS096-383-033 - STS-096 - Close-up of SDS valve in Node 1/Unity module
Related
STS101-340-009 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-002 - STS-101 - Various interior views of FGB/Zarya hardware
STS101-340-001 - STS-101 - Various interior views of FGB/Zarya hardware
STS101-340-010 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-026 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-023 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-020 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-017 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-024 - STS-101 - Interior views of FGB/Zarya hardware
STS101-340-008 - STS-101 - Interior views of FGB/Zarya hardware
Summary
The original finding aid described this as:
Description: Interior views of hardware aboard the Functional Cargo Block (FGB)/ Zarya module of the ISS taken by the STS-101 crew including: cables.
Subject Terms: HARDWARE DOCUMENTATION FGB STS-101
Date Taken: 7/22/2000
Categories: Station Configuration
Interior_Exterior: Interior
Ground_Orbit: On-orbit
Element: FGB
Original: Film - 35MM CN
Preservation File Format: TIFF
STS-101
Nothing Found.
Tags
interior
views
interior views
fgb
zarya
hardware
zarya iss
sts 101 atlantis
nasa
zarya module
high resolution
ultra high resolution
hardware documentation fgb sts 101
sts 101 crew
tiff sts 101
zarya hardware
sts 101
functional cargo block
station configuration
space program
Date
2000
Source
The U.S. National Archives
Link
Copyright info
No known copyright restrictions