visibility Similar

STS088-332-004 - STS-088 - View of air duct installed in the FGB/Zarya module

In the Space Station Processing Facility, workers along the edge of the payload canister watch as the U.S. Lab Destiny is lowered into the canister. A key element in the construction of the International Space Station, Destiny is 28 feet long and weighs 16 tons. This research and command-and-control center is the most sophisticated and versatile space laboratory ever built. It will ultimately house a total of 23 experiment racks for crew support and scientific research. Destiny will fly on STS-98, the seventh construction flight to the ISS. Launch of STS-98 is scheduled for Jan. 19 at 2:11 a.m. EST KSC-00pp1950

S130E007734 - STS-130 - Node 3 Outfitting

In the Space Station Processing Facility, the Italian-built Multi-Purpose Logistics Module “Raffaello” is suspended over a workstand where its weight and balance will be evaluated. Rafaello is the payload on mission STS-100, a Lab outfitting flight. Raffaello carries six system racks and two storage racks for the U.S. Lab. Launch of STS-100 is scheduled for April 19, 2001 KSC-00pp1727

STS-132 CREW CEIT - ATLANTIS 2010-2302

Technicians from the Jet Propulsion Laboratory (JPL) attach the upper equipment module to the propulsion module and the lower equipment module in the Payload Hazardous Servicing Facility in July prior to installation on the Cassini spacecraft at KSC. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. JPL is managing the Cassini project for NASA KSC-97PC1015

Orion Crew Module KSC Ground Ops Pathfinder

KENNEDY SPACE CENTER, FLA. -- An overhead crane moves the lid over the vacuum chamber containing the U.S. Lab, a component of the International Space Station. The 32,000-pound scientific research lab, named Destiny, is the first Space Station element to spend seven days in the renovated vacuum chamber for a leak test. Destiny is scheduled to be launched on Shuttle mission STS-98, the 5A assembly mission, targeted for Jan. 18, 2001. During the mission, the crew will install the Lab in the Space Station during a series of three space walks. The STS-98 mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Lab module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research KSC00pp0849

WCS Equipment. NASA public domain image colelction.

code Related

STS088-325-032 - STS-088 - View of FGB/Zarya module interior hardware

description

Summary

The original finding aid described this as:

Description: View of FGB/Zarya module interior hardware including: electrical connections, battery rechargers and air ducts.

Subject Terms: FGB HARDWARE STS-88 INSPECTION

Date Taken: 12/11/1998

Categories: Station Configuration

Interior_Exterior: Interior

Ground_Orbit: On-orbit

Element: FGB

Original: Film - 35MM CN

Preservation File Format: TIFF

STS-88

Nothing Found.

label_outline

Tags

fgb zarya module hardware zarya iss iss view sts 88 endeavour nasa zarya module high resolution ultra high resolution fgb hardware sts 88 inspection view tiff sts 88 battery rechargers air ducts station configuration space program
date_range

Date

1995
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

label_outline Explore Battery Rechargers, Fgb Hardware Sts 88 Inspection, Air Ducts

STS088-364-018 - STS-088 - View documenting items on the ISS stack

STS088-366-026 - STS-088 - View of the ISS modules in the Endeavour's payload bay

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians, lying on a work platform, remove window #8 from the top of the crew module of space shuttle Atlantis. Inspection and maintenance of the crew module windows is standard procedure between shuttle missions. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14. Photo credit: NASA/Glenn Benson KSC-2010-1082

S88E5082 - STS-088 - Currie in the FGB/Zarya module

S88E5233 - STS-088 - Cables and tethers

S123E009030 - STS-123 - FGB taken during Joint Operations

STS060-304-003 - STS-060 - Davis and Chang-Diaz disconnect air hose leading to Spacehab module

STS096-407-017 - STS-096 - MS Payette and MS Jernigan fly over stowage items in the FGB/Zarya module

STS088-335-001 - STS-088 - Krikalev eats snack on middeck

STS088-331-013 - STS-088 - Krikalev and Newman in the FGB/Zarya module

STS101-390-031 - STS-101 - Battery hardware in FGB/Zarya module

STS088-328-011 - STS-088 - View of the interior of the Node 1/Unity module

Topics

fgb zarya module hardware zarya iss iss view sts 88 endeavour nasa zarya module high resolution ultra high resolution fgb hardware sts 88 inspection view tiff sts 88 battery rechargers air ducts station configuration space program