visibility Similar

CAPE CANAVERAL, Fla. – The clouds take on a rosy glow as the dawn breaks over the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. Preparations are under way to back NASA's Shuttle Carrier Aircraft, or SCA, away from the mate-demate device surrounding it. Space shuttle Endeavour has been fitted with an aerodynamic tailcone and secured atop the aircraft for its upcoming ferry flight. The SCA, a modified 747 jetliner, will fly Endeavour to Los Angeles where it will be placed on public display at the California Science Center. This is the final ferry flight scheduled in the Space Shuttle Program era. For more information on the shuttles' transition and retirement, visit http://www.nasa.gov/transition. Photo credit: NASA/Dimitri Gerondidakis KSC-2012-5244

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, preparations are under way to roll space shuttle Endeavour to the Vehicle Assembly Building. The rollover began at 12:53 a.m. EST and was completed at 2:08 p.m. when Endeavour was towed into the VAB's transfer aisle. Next, Endeavour will be attached to a lifting sling, hoisted over a transom and lowered into High Bay 1, where it will be attached to its external fuel tank and solid rocket boosters. Rollout of the shuttle stack to Kennedy’s Launch Pad 39A, a significant milestone in launch processing activities, is planned for early January 2010. The Italian-built Tranquility module, the primary payload for Endeavour's STS-130 mission, will be installed in the payload bay after the shuttle arrives at the pad. Launch is targeted for early February. For information on the STS-130 mission and crew, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts130/index.html. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-6741

KENNEDY SPACE CENTER, FLA. -- The Boeing 747 Shuttle Carrier Aircraft is cast in morning shadows as it backs away from the Mate/Demate Device with the orbiter Columbia strapped to its back. The oldest of four orbiters in NASA's fleet, Columbia is being ferried to Palmdale, Calif., where it will undergo extensive inspections and modifications in Boeing's Orbiter Assembly Facility. The nine-month orbiter maintenance down period (OMDP) is the second in Columbia's history. Orbiters are periodically removed from flight operations for an OMDP. Columbia's first was in 1994. Along with more than 100 modifications on the vehicle, Columbia will be the second orbiter to be outfitted with the multifunctional electronic display system, or "glass cockpit." Columbia is expected to return to KSC in July 2000 KSC-99pp1141

KENNEDY SPACE CENTER, FLA. - As the orbiter Discovery, sitting on an orbiter transporter, moves away from NASA's Orbiter Processing Facility toward the Vehicle Assembly Building (VAB), workers accompany the vehicle. The rollover to the VAB marks the start of the journey to the launch pad and, ultimately, launch. Once inside the VAB, Discovery will be raised to vertical and lifted up and over into high bay 3 for stacking with its redesigned external tank and twin solid rocket boosters. The rollout of Space Shuttle Discovery to Launch Pad 39B is expected in approximately a week. Launch of Discovery on mission STS-121 is scheduled to take place in a window extending July 1 to July 19. Photo credit: NASA/Jim Grossmann KSC-06pd0817

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-1 at NASA’s Kennedy Space Center in Florida, United Launch Alliance technicians provide assistance as a large crane is lowered toward the right orbital maneuvering system, or OMS, pod for space shuttle Atlantis. It will be the last time an OMS pod is installed on Atlantis. The OMS provided the shuttle with thrust for orbit insertion, rendezvous and deorbit, and could provide up to 1,000 pounds of propellant to the aft reaction control system. The OMS is housed in two independent pods located on each side of the shuttle’s aft fuselage. Each pod contains one OMS engine and the hardware needed to pressurize, store and distribute the propellants to perform the velocity maneuvers. Atlantis’ OMS pods were removed and sent to the test facility at White Sands Space Harbor in New Mexico to be cleaned of residual toxic propellant. The work is part of the Space Shuttle Program’s transition and retirement processing of the space shuttle fleet. A groundbreaking was held Jan. 18 for Atlantis’ future home, a 65,000-square-foot exhibit hall in Shuttle Plaza at the Kennedy Space Center Visitor Complex. Atlantis is scheduled to roll over to the visitor complex in November in preparation for the exhibit’s grand opening in July 2013. For more information, visit http://www.nasa.gov/transition. Photo credit: NASA/Dimitri Gerondidakis KSC-2012-3400

STS-132 - Public domain NASA photogrpaph

SNC's Dream Chaser Spacecraft at NASA Armstrong Flight Research Center, October 16, 2017

KENNEDY SPACE CENTER, Fla. -- The orbiter Atlantis begins its move out of the Orbiter Processing Facility bay 3 over to the Vehicle Assembly Building (VAB). In the VAB it will be lifted to vertical and placed aboard the mobile launcher platform (MLP) for stacking with the solid rocket boosters and external tank. Atlantis is scheduled to launch Sept. 8 on mission STS-106, the fourth construction flight to the International Space Station, with a crew of seven KSC00pp1071

CAPE CANAVERAL, Fla. – United Space Alliance technicians prepare to uncover the cockpit windows on space shuttle Endeavour for an employee photo opportunity at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. Endeavour is balanced and secured atop NASA's Shuttle Carrier Aircraft, or SCA. The SCA, a modified 747 jetliner, will fly Endeavour to Los Angeles where it will be placed on public display at the California Science Center. This is the final ferry flight scheduled in the Space Shuttle Program era. For more information on the shuttles' transition and retirement, visit http://www.nasa.gov/transition. Photo credit: NASA/Kim Shiflett KSC-2012-5300

code Related

STS-135 - EOM - Public domain NASA photogrpaph

description

Summary

Description: ALERT STILL COVERAGE OF TOUCHDOWN. VIEW FROM OUTSIDE OF FENCE. LOOKING NORTH "WITH ORBITER COMING TOWARD CAMERA" SHOW TOUCHDOWN LOCATE AT AN APPROPRIATE DISTANCE FROM TOUCHDOWN POINT TO ASSURE AN ADEQUATE IMAGE SIZE WHEN THE ORBITER CONTACTS THE RUNWAY. COMMITTED ONLY FOR RUNWAY 15 (NORTH TO SOUTH) LANDINGS

Item: DL020-EOM

Date Taken: 7/21/2011

Image Type: DIGITAL STILLS

STS135 LAUNCH AND LANDING

Nothing Found.

label_outline

Tags

eom final shuttle mission sts 135 atlantis nasa launch and landing high resolution ultra high resolution runway landings show touchdown touchdown point adequate image size touchdown orbiter contacts digital stills sts 135 orbiter appropriate distance view space shuttle space program
date_range

Date

25/07/2005 - 21/07/2011
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

label_outline Explore Show Touchdown, Orbiter Contacts, Appropriate Distance

Topics

eom final shuttle mission sts 135 atlantis nasa launch and landing high resolution ultra high resolution runway landings show touchdown touchdown point adequate image size touchdown orbiter contacts digital stills sts 135 orbiter appropriate distance view space shuttle space program