visibility Similar

code Related

Saturn I - Saturn Apollo Program

description

Summary

The Saturn I (SA-3) flight lifted off from Kennedy Space Center launch Complex 34, November 16, 1962. The third launch of Saturn launch vehicles, developed at the Marshall Space Flight Center (MSFC) under the direction of Dr. Wernher von Braun, incorporated a Saturn I, Block I engine. The typical height of a Block I vehicle was approximately 163 feet. and had only one live stage. It consisted of eight tanks, each 70 inches in diameter, clustered around a central tank, 105 inches in diameter. Four of the external tanks were fuel tanks for the RP-1 (kerosene) fuel. The other four, spaced alternately with the fuel tanks, were liquid oxygen tanks as was the large center tank. All fuel tanks and liquid oxygen tanks drained at the same rates respectively. The thrust for the stage came from eight H-1 engines, each producing a thrust of 165,000 pounds, for a total thrust of over 1,300,000 pounds. The engines were arranged in a double pattern. Four engines, located inboard, were fixed in a square pattern around the stage axis and canted outward slightly, while the remaining four engines were located outboard in a larger square pattern offset 40 degrees from the inner pattern. Unlike the inner engines, each outer engine was gimbaled. That is, each could be swung through an arc. They were gimbaled as a means of steering the rocket, by letting the instrumentation of the rocket correct any deviations of its powered trajectory. The block I required engine gimabling as the only method of guiding and stabilizing the rocket through the lower atmosphere. The upper stages of the Block I rocket reflected the three-stage configuration of the Saturn I vehicle. During the SA-3 flight, the upper stage ejected 113,560 liters (30,000 gallons) of ballast water in the upper atmosphere for "Project Highwater" physics experiment. The water was released at an altitude of 65 miles, where within only 5 seconds, it expanded into a massive ice cloud 4.6 miles in diameter. Release of this vast quantity of water in a near-space environment marked the first purely scientific large-scale experiment.

label_outline

Tags

sa 3 launch saturn i block i msfc marshall space flight center saturn apollo program rocket liftoff early rockets saturn moon rocket high resolution engine fuel tanks stage block rocket four engines oxygen tanks tank square pattern vehicles diameter thrust pattern center tank eight h 1 engines eight tanks water rocket engines rocket technology rocket launch nasa
date_range

Date

16/11/1962
place

Location

Marshall Spaceflight Center, Huntsville, Madison County, Alabama, United States, 35808 ,  34.63076, -86.66505
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Four Engines, Oxygen Tanks, Eight H 1 Engines

FLOW VISUALIZATION OF FAN ON VERTICAL THRUST STAND

CAPE CANAVERAL, Fla. – The first stage ignited on NASA’s Ares I-X test rocket at Launch Pad 39B at NASA's Kennedy Space Center in Florida at 11:30 a.m. EDT on Oct. 28. The rocket produces 2.96 million pounds of thrust at liftoff and reaches a speed of 100 mph in eight seconds. This was the first launch from Kennedy's pads of a vehicle other than the space shuttle since the Apollo Program's Saturn rockets were retired. The parts used to make the Ares I-X booster flew on 30 different shuttle missions ranging from STS-29 in 1989 to STS-106 in 2000. The data returned from more than 700 sensors throughout the rocket will be used to refine the design of future launch vehicles and bring NASA one step closer to reaching its exploration goals. For information on the Ares I-X vehicle and flight test, visit http://www.nasa.gov/aresIX. Photo credit: NASA/Sandra Joseph and Kevin O'Connell KSC-2009-5987

S134E005083 - STS-134 - External Tank (ET) Separation

S134E005122 - STS-134 - External Tank (ET) Separation

S117E05157 - STS-117 - External Tank after separation from Atlantis during the STS-117 mission

S134E005045 - STS-134 - External Tank (ET) Separation

Elizabeth Blanchford, an employee at USAID's Office

The Cassini interplanetary mission to Saturn and its moon, Titan, is successfully carried into space by a Lockheed Martin Titan IVB launch vehicle at 4:43 A.M. EDT from complex 40

STS112-384-002 - STS-112 - External Tank separation

MSFC rocket park

Helfaut Interieur 28 10 2011 05

S134E005092 - STS-134 - External Tank (ET) Separation

Topics

sa 3 launch saturn i block i msfc marshall space flight center saturn apollo program rocket liftoff early rockets saturn moon rocket high resolution engine fuel tanks stage block rocket four engines oxygen tanks tank square pattern vehicles diameter thrust pattern center tank eight h 1 engines eight tanks water rocket engines rocket technology rocket launch nasa