visibility Similar

code Related

Class in the use of precision instruments 8d14578v

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Checking the outside diameter of a cast iron face cam to the nearest thousandth of an inch with a five to six inch micrometer caliper

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Testing the angle of a machined part in degrees and minutes with a five-inch sine bar and vernier height gauge, and consulting a table of constants for a five-inch sine bar

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Testing the angle of a machined part in degrees and minutes with a five-inch sine bar and vernier height gauge, and consulting a table of constants for a five-inch sine bar

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Testing diameter variations and concentricity of ground stepped shafts with a comparator. The readings are in 10,000ths of an inch

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Testing diameter variations and concentricity of ground stepped shafts with a comparator. The readings are in 10,000ths of an inch

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Testing the angle of a machined part in degrees and minutes with a five-inch sine bar and vernier height gauge, and consulting a table of constants for a five-inch sine bar

New York, New York. Class in the use of precision instruments, part of the government-sponsored industrial training program at New York University. Most of the students are women. Checking the outside diameter of a cast iron face cam to the nearest thousandth of an inch with a five to six inch micrometer caliper

description

Summary

Public domain photograph of New York in 1930s, free to use, no copyright restrictions image - Picryl description

Nothing Found.

label_outline

Tags

new york safety film negatives class precision instruments precision instruments part program university new york university students women diameter cast iron face cam cast iron face cam inch micrometer caliper united states history library of congress new york city
date_range

Date

01/01/1943
person

Contributors

Collins, Marjory, 1912-1985, photographer
place

Location

create

Source

Library of Congress
link

Link

http://www.loc.gov/
copyright

Copyright info

No known restrictions. For information, see U.S. Farm Security Administration/Office of War Information Black & White Photographs http://www.loc.gov/rr/print/res/071_fsab.html

label_outline Explore Micrometer, Precision Instruments, Caliper

Conversion. Copper and brass processing. Stocks of partially completed lengths of seamless copper tube in many sizes. These have still to go through several more draws through dies on drawbenches. Each draw reduces them in diameter and wall thickness, and lengthens them out. Then, before the tubes leaves the mill, the ends will be sawed off straight and clean. Chase Copper and Brass Company, Euclid, Ohio

Grizzly Giant, 33 ft diameter, looking up, Mariposa Grove, Mariposa County, Cal.

SSGT Steve Haga (USAF), 5th Operations Support Squadron, SRA John Ankeny (USAF), 27th Operations Support Squadron, and TSGT Dennis Boggs (USAF), 33rd Combat Communications Squadron, monitor flight operations as air traffic controllers, 4100th Group Provisional (USAF), inside the Precision Approach Radar facility at Tuzla Air Base, Bosnia-Herzegovina, during Operation Joint Endeavor. Operation Joint Endeavor is a peacekeeping effort by a multinational Implementation Force (IFOR), comprised of NATO and non-NATO military forces, deployed to Bosnia in support of the Dayton Peace Accords

DOUBLE YAW CALIPER DISC BRAKE ASSEMBLY ON MOD-0 100 KW KILOWATT WIND TURBINE PROJECT

KENNEDY SPACE CENTER, Fla. -- The landing lights on Runway 15 cast a glow as Space Shuttle Atlantis approaches touchdown on KSC’s Shuttle Landing Facility to complete the 9-day, 20-hour, 9-minute-long STS-101 mission. At the controls are Commander James D. Halsell Jr. and Pilot Scott “Doc” Horowitz. Also onboard the orbiter are Mission Specialists Mary Ellen Weber, James S. Voss, Jeffrey N. Williams, Susan J. Helms and Yury Usachev of Russia. The crew is returning from the third flight to the International Space Station. This was the 98th flight in the Space Shuttle program and the 21st for Atlantis, also marking the 51st landing at KSC, the 22nd consecutive landing at KSC, the 14th nighttime landing in Shuttle history and the 29th in the last 30 Shuttle flights. Main gear touchdown was at 2:20:17 a.m. EDT May 29 , landing on orbit 155 of the mission. Nose gear touchdown was at 2:20:30 a.m. EDT, and wheel stop at 2:21:19 a.m. EDT KSC00pp0675

Close-up showing bracing arrangement on gear cutter. Giant arms holding gear in place are changed to adjust the rotating gear to the cutting mechanism. The job takes three to six weeks of day and night operation for completion. This is one of many highly specialized big precision jobs the converted American industry is turning out for Uncle's Sam's modern fighting ships

Conversion. Soft drink dispenser plant. Converted from the production of such items as soft drink dispensers and game boards, this Eastern manufacturing firm now produces precision tools for cartridge manufacture, brass quadrants and other essentials for the armed forces. Personnel has jumped from 12 to 76 workers. In this machine shop different types of measuring gauges, bullet tools, dies and punches for use in America's arsenals are produced. Bristol and Martin Company, New York, New York

ATLANTIC OCEAN (June 17, 2017) Fireman Donaven James

The Franklin engine cylinder; The 56 cooling flanges are an integral part of the Vanadium cast iron cylinder.

HAZMAT helicopter flying CAM (Camera) at SanJose Airport ARC-1998-AC98-0194-4

TRUE TRACE ATTACHMENTS ON TRUE MILL CAM CUTTER

Anaconda smelter, Montana. Anaconda Copper Mining Company. A series of roll crushers reduce the size of ore from a maximum of one inch to the size of coarse sand

Topics

new york safety film negatives class precision instruments precision instruments part program university new york university students women diameter cast iron face cam cast iron face cam inch micrometer caliper united states history library of congress new york city