visibility Similar

STS-132 WATER ON CRAWLERWAY PROHIBITING ROLLOUT 2010-2896

CAPE CANAVERAL, Fla. -- On Launch Pad 39B at NASA's Kennedy Space Center, a crane is removing parts of the lightning mast to be erected on towers being built for the Constellation Program and Ares/Orion launches. Behind it are the fixed and rotating service structures on top of the pad. An 80-foot lightning mast is on top of the fixed service structure as part of the former lightning protection system. Pad B will be the site of the first Ares vehicle launch, including Ares I-X which is scheduled for April 2009. Photo credit: NASA/Jim Grossmann KSC-08pd1591

KENNEDY SPACE CENTER, FLA. - Launch Complex 39A is unscathed and stands ready for processing activities following Hurricane Frances. The storm's path over Florida took it through Cape Canaveral and KSC property during Labor Day weekend. There was no damage to the Space Shuttle orbiters or to any other flight hardware. KSC-04pd1759

CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida, the Shuttle Carrier Aircraft moves into position under space shuttle Discovery suspended 60 feet off the ground in the mate-demate device. The device, known as the MDD, is a large gantry-like steel structure used to hoist a shuttle off the ground and position it onto the back of the aircraft, or SCA. The SCA is a Boeing 747 jet, originally manufactured for commercial use, which was modified by NASA to transport the shuttles between destinations on Earth. The SCA designated NASA 905 is assigned to the remaining ferry missions, delivering the shuttles to their permanent public display sites. NASA 905 is scheduled to ferry Discovery to the Washington Dulles International Airport in Virginia on April 17, after which the shuttle will be placed on display in the Smithsonian's National Air and Space Museum Steven F. Udvar-Hazy Center. For more information on the SCA, visit http://www.nasa.gov/centers/dryden/news/FactSheets/FS-013-DFRC.html. For more information on shuttle transition and retirement activities, visit http://www.nasa.gov/transition. Photo credit: NASA/Kim Shiflett KSC-2012-2211

Stennis Space Center Test Facility

CAPE CANAVERAL, Fla. -- Space shuttle Endeavour, attached to its external fuel tank and solid rocket boosters atop a crawler-transporter, is ready for its slow move from High Bay 3 in the Vehicle Assembly Building to Launch Pad 39A at NASA's Kennedy Space Center in Florida. The 3.4-mile trek, known as "rollout," will take about seven hours to complete. This is the final scheduled rollout for Endeavour. Endeavour and its six STS-134 crew members will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank, additional spare parts for the Dextre robotic helper and micrometeoroid debris shields to the International Space Station on the shuttle's final spaceflight. Launch is targeted for April 19 at 7:48 p.m. EDT. For more information visit, www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Jim Grossmann KSC-2011-2213

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, cleanup of Launch Pad 39B is in progress beside the pad's flame trench. The trench is 450 feet long, 58 feet wide and 42 feet deep with an inner inverted V-shaped steel flame deflector. Sand, reinforcing steel and large wooden mats were placed over the pad's concrete surfaces during deconstruction to protect them from falling debris. In the distance is the 525-foot-tall Vehicle Assembly Building. In 2009, the structure at the pad was no longer needed for NASA's Space Shuttle Program, so it is being restructured for future use. The new design will feature a "clean pad" for rockets to come with their own launcher, making it more versatile for a number of rockets and spacecraft. The lightning protection system, consisting of three lightning towers and a wire catenary system, will remain. For information on NASA's future plans, visit http://www.nasa.gov/exploration. Photo credit: NASA/Kim Shiflett KSC-2011-6091

CAPE CANAVERAL, Fla. – Modifications continue on the Multi-Payload Processing Facility, or MPPF, at NASA's Kennedy Space Center in Florida. The high bay entrance was recently enlarged and a new door installed. New siding is being installed around the entrance. Kennedy's Center Operations Directorate is overseeing upgrades to the MPPF for the Ground Systems Development and Operations Program. The extensive upgrades and modernizations will support processing of Orion spacecraft for NASA's exploration missions. The 19,647-square-foot building, originally constructed in 1995, primarily will be used for Orion hypergolic fueling, ammonia servicing and high-pressure gas servicing and checkout before being transported to the Vehicle Assembly Building for integration with the Space Launch System. Photo credit: NASA/Daniel Casper KSC-2014-2290

PANORAMIC VIEW OF PEGASUS BARGE AREA WITH VAB IN BACKGROUND 2010-4395

code Related

Latest Overall Look of Pad 39A. NASA public domain image. Kennedy space center.

description

Summary

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, launch pad 39A looks much like it did after the liftoff of STS-135, the final space shuttle mission, on July 8, 2011. This view shows the flame trench where smoke and flame from the shuttle's twin solid rocket boosters were deflected away from the pad. Both launch pad 39A and 39B pad 39A was originally built for the Apollo/Saturn V rockets that launched American astronauts on their historic journeys to the moon and later modified to support the 30-year shuttle program. To learn more about Launch Pad 39A visit: http://www.nasa.gov/mission_pages/shuttle/launch/launch-complex39-toc.html Photo credit: NASA/Dan Casper

Nothing Found.

label_outline

Tags

ksc 2014 1714 lc 39 a nasa ksc daniel casper imcs kennedy space center pad high resolution spacecraft launch pad rocket launch space launch complex cape canaveral machinery nasa
date_range

Date

11/03/2014
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Lc 39 A, Nasa Ksc Daniel Casper Imcs, Pad

STS-132 ATLANTIS ROLLOUT FROM VAB TO PAD 39A 2010-2919

Rosario fc station underconstr

The air conditioning machinery room aboard the guided missile frigate NICHOLAS (FFG-47)

Plattsburgh Air Force Base, Power Check Pad with Suppressor, Near Idaho at Alabama Avenue, on flightline Apron, Plattsburgh, Clinton County, NY

Static Test Firing of Saturn V S-1C Stage

STS-131 - EOM - Public domain NASA photogrpaph

Machinery Repairman Third Class (DV) Erin Telitz works alongside Signalman First Class (EOD/SW) Joel Blea as he communicates with a patient and medical diver inside a transportable recompression chamber aboard USS DENVER (LPD 9) during a drill on the system as part of Exercise KERNEL BLITZ '97 off coast of Southern California (CA). The sailors are attached to Explosive Ordnance Disposal Mobile Unit 3, Naval Amphibious Base, Coronado, CA. KERNEL BLITZ is a bi-annual Commander-in-CHIEF Pacific (CINCPAC) fleet training exercise (FLEETEX) focused on operational/tactical training of Commander, Third Fleet (C3F)/ I Marine Expeditionary Forces (MEF) and Commander, Amphibious Group 3 (CPG-3)/...

A Standard Missile 6 launches to engage an over-the-horizon threat as part of the U.S. Navy's first live fire demonstration to successfully test the integration of the F-35 with existing NIFC-CA architecture.

Conversion. Toy factory. Stephanie Cewe and Ann Manemeit, have turned their skill from peacetime production of toy trains to the assembly of parachute flare casings for the armies of democracy. Along with other workers in this Eastern plant, they have turned their skill to the vital needs of the day, and in many cases have seen to it that the machinery they used to use does Uncle Sam's most important work today. Here, they are assembling parachute flare casings, using the same electric screwdrivers they formerly used to assemble the locomotives of toy trains. A. C. Gilbert Company, New Haven, Connecticut

A Standard Missile - 3 (SM-3) is launched from the Pearl Harbor-based guided-missile destroyer USS Paul Hamilton (DDG 60).

STS-133 - EOM - Public domain NASA photogrpaph

CAPE CANAVERAL, Fla. – In High Bay 4 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida, the Ares I-X upper stage simulator service module/service adapter segment (foreground) is being prepared for its move to a stand. Other segments are placed and stacked on the floor around it. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. The Ares I-X is targeted for launch in July 2009. Photo credit: NASA/Kim Shiflett KSC-2009-2462

Topics

ksc 2014 1714 lc 39 a nasa ksc daniel casper imcs kennedy space center pad high resolution spacecraft launch pad rocket launch space launch complex cape canaveral machinery nasa