visibility Similar

Air Force maintenance technicians from 90th Space Wing conduct a missile life extension and upgrade on a Minuteman III as part of a series of modernization programs during the joint military exercise GLOBAL GUARDIAN '98

WINDMILL BLADES IN HANGAR AND IN TEST CELL CW-22 IN THE ENGINE RESEARCH BUILDING ERB

PARTS INSTALLED ON 100 KW KILOWATT WINDMILL

Operation to stack Ares 1-X Segment US5 onto US4

Apollo 11 decontamination activities, NASA Apollo program

KENNEDY SPACE CENTER, FLA. -- On an upper level of high bay 1 of the Vehicle Assembly Building, technicians move protective material toward the nose cone (foreground) of Atlantis' external tank. The nose cone will undergo repair for hail damage. A severe thunderstorm with golf ball-sized hail caused visible divots in the giant tank's foam insulation and minor surface damage to about 26 heat shield tiles on the shuttle's left wing. Further evaluation of the tank is necessary to get an accurate accounting of foam damage and determine the type of repair required and the time needed for that work. A new target launch date has not been determined, but teams will focus on preparing Atlantis for liftoff in late April on mission STS-117. Photo credit: NASA/George Shelton KSC-07pd0591

KENNEDY SPACE CENTER, FLA. -- On an upper level of high bay 1 of the Vehicle Assembly Building, technicians prepare the area around the nose cone (foreground) of Atlantis' external tank that will undergo repair for hail damage. A severe thunderstorm with golf ball-sized hail caused visible divots in the giant tank's foam insulation and minor surface damage to about 26 heat shield tiles on the shuttle's left wing. Further evaluation of the tank is necessary to get an accurate accounting of foam damage and determine the type of repair required and the time needed for that work. A new target launch date has not been determined, but teams will focus on preparing Atlantis for liftoff in late April on mission STS-117. Photo credit: NASA/George Shelton KSC-07pd0590

Ukraine - WMD Dismantlement - January, 1998 - Inspection team visit to various former Soviet Union (FSU) Weapons of Mass Destruction (WMD) production facilities, undated, unknown location. Photos of ICBM components on display, machine shop workers dismantling components, workers dismantling components, factory machines, SS-18 suspended by crane

I932 Sverige. Public domain image.

code Related

DAMAGED HYDRO CARBON BOX ROCKET ENGINE COOLING PROGRAM

DAMAGED HYDRO CARBON BOX ROCKET ENGINE COOLING PROGRAM

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

GASIFER CERAMIC NOZZLE ASSEMBLY FOR CATE ENGINE

LARGE CARBON STEEL EXHAUST CONE FOR ROCKETDYNE ENGINE

description

Summary

The original finding aid described this as:

Capture Date: 11/1/1976

Photographer: DONALD HUEBLER

Keywords: Larsen Scan

Photographs Relating to Agency Activities, Facilities and Personnel

label_outline

Tags

large carbon steel exhaust cone large carbon steel exhaust cone rocketdyne engine nasa national aeronautics and space administration high resolution ultra high resolution rocketdyne engine photographer donald huebler nasa photographs space program 1970 s us national archives
date_range

Date

1976
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

label_outline Explore Large, Rocketdyne, Exhaust

SPUTTER IN EXHAUST NOZZLE OF QUIET ENGINE AT THE HANGAR

INTAKE AND EXHAUST SECTIONS OF APU AUXILIARY POWER UNIT INSTALLATION ON C-131B AIRPLANE

CRT C2 CARBON DIOXIDE PRIMARY COMBUSTOR SECTION

A M35A2 2 1/2-ton cargo truck pulls a support vehicle up the starboard loading ramp of the United States Naval Ship (USNS) Gordon. USNS Gordon is the first United States Navy (USN) Large, Medium-Speed Roll-on/Roll-off Ships, or LMSR, cargo vessel. USNS Gordon is a former commercial tanker and underwent conversion to United States Navy Military Sealift Command specifications to make it ideal for the loading, transport and unloading of United States Army and United States Marine Corps combat equipment. It is more than 300 yards long and has a storage capacity of more than 300,000 square feet. The ship is named in honor of MASTER Sergeant Gary I. Gordon, US Army, who was posthumously...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, United Space Alliance worker Dan Kenna (right) positions a Reinforced Carbon Carbon panel on the table to perform flash thermography. In the background, Paul Ogletree observes the monitor. Attached to the leading edge of the wing of the orbiters, the gray carbon composite RCC panels have sufficient strength to withstand the aerodynamic forces experienced during launch and reentry, which can reach as high as 800 pounds per square foot. The operating range of RCC is from minus 250º F to about 3,000º F, the temperature produced by friction with the atmosphere during reentry.

Image taken from page 210 of 'Mine Drainage; being a complete and practical treatise on direct-acting underground steam-pumping machinery, etc. [With plates.]'

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17-B at Cape Canaveral Air Force Station in Florida, workers complete encapsulation of the fairing around NASA's Dawn spacecraft. The fairing is a molded structure that fits flush with the outside surface of the Delta II upper stage booster and forms an aerodynamically smooth nose cone, protecting the spacecraft during launch and ascent. Dawn's goal is to characterize the conditions and processes of the solar system's earliest epoch 4.5 billion years ago by investigating in detail two of the largest asteroids, Ceres and Vesta. They reside between Mars and Jupiter in the asteroid belt. Launch is scheduled for July 8. Photo credit: NASA/Amanda Diller KSC-07pd1721

A view of the engine exhaust of an F-4 Phantom II aircraft on the flight deck of the aircraft carrier USS MIDWAY (CV 41). The F-4 was damaged when the MIDWAY collided with the Panamanian freighter CACTUS. (Substandard image)

US Air Force (USAF) Technical Sergeant (TSGT) George Nunn, 37th Airlift Wing (AW) performs an intake and exhaust inspection on a USAF C-130 Hercules aircraft on the flight line at Aviano Air Base (AB), Italy

US Air Force (USAF) personnel from the 49th Materiel Maintenance Group (MMG) Basic Expeditionary Airfield Resources (BEAR) Base Team, Holloman Air Force Base (AFB), New Mexico (NM), and the 321st Expeditionary Civil Engineer Squadron (ECES) Structures Team use a light Lorain hydraulic crane to erect a Large Area Maintenance Shelter (LAMS). The shelter will store and protect aircraft equipment from the elements during Operation IRAQI FREEDOM

A close up of a chrome motorcycle engine. Motorcycle exhaust chrome.

A close up of a motorcycle exhaust pipe. Exhaust exhaust pipes motorcycle.

Topics

large carbon steel exhaust cone large carbon steel exhaust cone rocketdyne engine nasa national aeronautics and space administration high resolution ultra high resolution rocketdyne engine photographer donald huebler nasa photographs space program 1970 s us national archives