visibility Similar

SOLAR COLLECTOR, NASA Technology Images

A view of the combat information center, identification friend or foe and radar equipment room aboard the guided missile frigate FORD (FFG-54). The ship is at 90 percent completion

RME 1312 - RRMD detector and samples

KENNEDY SPACE CENTER, Fla. - In the Vertical Processing Facility, members of the STS-109 crew practice on some of the equipment for their Hubble Space Telescope (HST) Servicing mission. Seen in the foreground are (left) Payload Commander John Grunsfeld and (right) Mission Specialist James Newman. The rest of the crew are Commander Scott Altman, Pilot Duane Carey, and Mission Specialists Nancy Currie, Richard Linnehan and Michael Massimino. The goal of the mission is to service the HST, replacing Solar Array 2 with Solar Array 3, replacing the Power Control Unit, removing the Faint Object Camera and installing the Advanced Camera for Surveys, installing the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) Cooling System, and installing New Outer Blanket Layer insulation on bays 5 through 8. Mission STS-109 is scheduled for launch Feb. 14, 2002 KSC-01pp1727

The combat information center, identification friend or foe and radar equipment room on the guided missile frigate USS KAUFFMAN (FFG 59) at completion of construction

RME 1312 - RRMD detector and samples

Clark conducts BDS media sample OPS in the SH during STS-107

KENNEDY SPACE CENTER, FLA. -- On NASA Kennedy Space Center's Launch Pad 39A, STS-123 Mission Specialist Rick Linnehan photographs some of the payload in space shuttle Endeavour's payload bay. He and other STS-123 crew members are at Kennedy for a full launch dress rehearsal, known as the terminal countdown demonstration test, or TCDT. The TCDT provides astronauts and ground crews with an opportunity to participate in various simulated countdown activities, including equipment familiarization and emergency training. Endeavour is targeted to launch March 11 at 2:28 a.m. EDT on the 16-day STS-123 mission to the International Space Station. Endeavour and its crew will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Kim Shiflett KSC-08pd0521

Cape Canaveral Air Force Station, Launch Complex 39, Mobile Launcher Platforms, Launcher Road, East of Kennedy Parkway North, Cape Canaveral, Brevard County, FL

code Related

KENNEDY SPACE CENTER, FLA. -- Workers in the Orbiter Processing Facility (OPF) Bay 1 check the Keel Yoke Device (KYD) installed in the orbiter Discovery. The KYD will support the International Cargo Carrier (ICC) to be fitted in the orbiter for mission STS-96. The ICC will carry unpressurized cargo such as the external Russian cargo crane known as STRELA, the SPACEHAB Oceaneering Space System Box (SHOSS), which is a logistics items carrier, and an ORU Transfer Device (OTD), a U.S.-built crane that will be stowed on the station for use during future ISS assembly missions. The primary payload of STS-96 is the SPACEHAB Double Module, an element of the International Space Station. STS-96 is targeted for launch on May 20 at 9:32 a.m. from Launch Pad 39B KSC-99pp0308

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility (OPF) Bay 1, workers lift the Keel Yoke Device (KYD) that will be fitted inside the payload bay of orbiter Discovery. The KYD will support the International Cargo Carrier (ICC) to be installed in the orbiter for mission STS-96. The ICC will carry unpressurized cargo such as the external Russian cargo crane known as STRELA, the SPACEHAB Oceaneering Space System Box (SHOSS), which is a logistics items carrier, and an ORU Transfer Device (OTD), a U.S.-built crane that will be stowed on the station for use during future ISS assembly missions. The primary payload of STS-96 is the SPACEHAB Double Module, an element of the International Space Station. STS-96 is targeted for launch on May 20 at 9:32 a.m. from Launch Pad 39B KSC-99pp0306

KENNEDY SPACE CENTER, FLA. -- Workers in the Orbiter Processing Facility (OPF) Bay 1 watch as the Keel Yoke Device (KYD) is lowered by crane into the open payload bay of the orbiter Discovery. The KYD will support the International Cargo Carrier (ICC) to be installed in the orbiter for mission STS-96. The ICC will carry unpressurized cargo such as the external Russian cargo crane known as STRELA, the SPACEHAB Oceaneering Space System Box (SHOSS), which is a logistics items carrier, and an ORU Transfer Device (OTD), a U.S.-built crane that will be stowed on the station for use during future ISS assembly missions. The primary payload of STS-96 is the SPACEHAB Double Module, an element of the International Space Station. . STS-96 is targeted for launch on May 20 at 9:32 a.m. from Launch Pad 39B KSC-99pp0307

KENNEDY SPACE CENTER, FLA. -- KSC workers watch as the orbiter Discovery makes the turn around the Vehicle Assembly Building on its move from Orbiter Processing Facility (OPF) bay 1 to OPF bay 3. Ongoing payload and ground processing assessments will be completed in bay 3. Managers will then determine when to roll the orbiter to the Vehicle Assembly Building for stacking with the external tank and solid rocket boosters, and when to roll out to Launch Pad 39A. Discovery is scheduled to launch Oct. 5 at 9:30 p.m. EDT on mission STS-92, which will be the 100th flight in the Shuttle program KSC00pp1191

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility (OPF) bay 2 during Crew Equipment Interface Test (CEIT), members of the STS-97 crew look over the Orbital Docking System (ODS) in Endeavour’s payload bay. At left, standing, is Mission Specialist Joe Tanner. At right is Mission Specialist Carlos Noriega, with his hands on the ODS. The others are workers in the OPF. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission KSC00pp1424

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility (OPF) bay 2 during Crew Equipment Interface Test (CEIT), Mission Specialist Joe Tanner (left) gets instruction from a worker while Mission Specialist Carlos Noriega (right) practices working latches on the Orbital Docking System in Endeavour’s payload bay. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission KSC-00pp1427

KENNEDY SPACE CENTER, FLA. -- United Space Alliance workers who worked on the orbiter Discovery during process flow pose alongside it during the orbiter’s transfer to Orbiter Processing Facility (OPF) bay 3. Ongoing payload and ground processing assessments will be completed in bay 3. Managers will then determine when to roll the orbiter to the Vehicle Assembly Building for stacking with the external tank and solid rocket boosters, and when to roll out to Launch Pad 39A. Discovery is scheduled to launch Oct. 5 at 9:30 p.m. EDT on mission STS-92, which will be the 100th flight in the Shuttle program KSC00pp1190

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility (OPF) bay 2 during Crew Equipment Interface Test (CEIT), Mission Specialist Joe Tanner (left) gets instruction from a worker while Mission Specialist Carlos Noriega (right) practices working latches on the Orbital Docking System in Endeavour’s payload bay. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission KSC00pp1427

KENNEDY SPACE CENTER, FLA. -- In Orbiter Processing Facility (OPF) bay 2 during Crew Equipment Interface Test (CEIT), Mission Specialists Joe Tanner (left) and Carlos Noriega (right) practice working parts of the Orbital Docking System (ODS) in Endeavour’s payload bay. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission KSC-00pp1425

KENNEDY SPACE CENTER, FLA. -- Workers in the Orbiter Processing Facility (OPF) Bay 1 make final adjustments to the Keel Yoke Device (KYD) being installed in the orbiter Discovery. The KYD will support the International Cargo Carrier (ICC) to be fitted in the orbiter for mission STS-96. The ICC will carry unpressurized cargo such as the external Russian cargo crane known as STRELA, the SPACEHAB Oceaneering Space System Box (SHOSS), which is a logistics items carrier, and an ORU Transfer Device (OTD), a U.S.-built crane that will be stowed on the station for use during future ISS assembly missions. The primary payload of STS-96 is the SPACEHAB Double Module, an element of the International Space Station. STS-96 is targeted for launch on May 20 at 9:32 a.m. from Launch Pad 39B KSC-99pp0309

description

Summary

KENNEDY SPACE CENTER, FLA. -- Workers in the Orbiter Processing Facility (OPF) Bay 1 make final adjustments to the Keel Yoke Device (KYD) being installed in the orbiter Discovery. The KYD will support the International Cargo Carrier (ICC) to be fitted in the orbiter for mission STS-96. The ICC will carry unpressurized cargo such as the external Russian cargo crane known as STRELA, the SPACEHAB Oceaneering Space System Box (SHOSS), which is a logistics items carrier, and an ORU Transfer Device (OTD), a U.S.-built crane that will be stowed on the station for use during future ISS assembly missions. The primary payload of STS-96 is the SPACEHAB Double Module, an element of the International Space Station. STS-96 is targeted for launch on May 20 at 9:32 a.m. from Launch Pad 39B

label_outline

Tags

kennedy space center workers orbiter opf bay adjustments keel yoke keel yoke device kyd discovery orbiter discovery support cargo carrier international cargo carrier icc sts mission sts russian russian cargo crane strela spacehab space system box shoss logistics items logistics items carrier oru transfer oru transfer device otd iss future iss payload double module spacehab double module element international space station launch pad b ksc spacehab oceaneering space system box cargo ship nasa
date_range

Date

18/03/1999
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore International Cargo Carrier, Future Iss, Russian Cargo Crane

Frog Yoke, arts of africa oceania and the americas

KENNEDY SPACE CENTER, FLA. -- During Crew Equipment Interface Test (CEIT) activities at SPACEHAB, members of the STS-106 crew check out a Russian foot restraint, equipment that will be part of the payload on their mission to the International Space Station. Around the table are Mission Specialist Yuri I. Malenchenko (back to camera), a SPACEHAB worker, and Mission Specialists Daniel C. Burbank (at end of table) and Edward T. Lu (right). Others at KSC for the CEIT are Commander Terrence W. Wilcutt, Pilot Scott D. Altman, and Mission Specialists Boris V. Morukov and Richard A. Mastracchio. Malenchenko and Morukov represent the Russian Aviation and Space Agency. On the 11-day mission, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module for the first long-duration crew, dubbed “Expedition One,” which is due to arrive at the Station in late fall. STS-106 is scheduled to launch Sept. 8, 2000, at 8:31 a.m. EDT from Launch Pad 39B KSC00pp0961

US Air Force SENIOR AIRMAN Troy Drasher assigned to the 8th Fighter Wing at Kunsan Air Base, South Korea makes final adjustments on the TER-9A Triple Ejector Rack mounted under the wing of an F-16 Fighting Falcon aircraft. The rack is loaded with MK-82 500-pound general-purpose bombs. The image is from the June 2000, AIRMAN Magazine article "A Year to Remember"

A welder authenticates the keel by welding the initials of the ship's sponsor, Mrs. Sharla D. Tester, onto the keel plate of the U.S. Navy's fifteenth Littoral Combat Ship (LCS), the future USS Billings (LCS 15), in a ceremony.

A corpsman assigned to Navy Mobile Construction Battalion Four (NMCB-4) makes adjustments to his protective chemical clothing during a simulated chemical warfare exercise at the central training area on Okinawa

STS082-362-025 - STS-082 - EVA 2 activity on Flight Day 5 to service the Hubble Space Telescope

Production. Launching of the SS Booker T. Washington. America needs ships to carry its guns and tanks and planes to the battlefronts of the world. A few minutes after the SS Booker T. Washington, first Liberty Ship named for a Negro, was launched at the California Shipbuilding Corporation's Wilmington yards, workmen were busy laying the keel for a new ship in America's growing Victory Fleet

US Navy (USN) Aviation Ordnanceman Third Class (AO3) Andy Mills, Strike Fighter Squadron One Nine Two (VFA-192) makes final adjustments on the MK-82 500-pound bomb attached to the wing pylon of a USN F/A-18C Hornet aircraft, on the flight deck of Aircraft Carrier USS KITTY HAWK (CV-63)

CHIEF MASTER Sergeant (CMSGT) James Bankes (foreground), USAF, electronics technician, 193rd Special Operations Wing (SOW), Pennsylvania Air National Guard (PANG), on the EC-130E Commando Solo, makes adjustments to the broadcast signal while wearing his helmet and mask in NBC configuration, accomplishing his periodic chemical warfare defense training. The 193rd SOW is currently flying Commando Solo missions in support of Operation ENDURING FREEDOM

GEN John R. Dailey, assistant commandant of the Marine Corps, authenticates the keel plaque of the amphibious assault ship BOXER (LHD-4) during the ship's keel-laying ceremony. Among those looking on are RADM Robert E. Traister, third from left, deputy commander (surface combatants), Naval Sea Systems Command, and Jerry St. Pe, fourth from left, president of Ingalls Shipbuilding

STS106-388-025 - STS-106 - Pilot Altman works with the SOAR laptop computer in SpaceHab during STS-106

An underside view of the keel and hull of the mine countermeasures ship SCOUT (MCM-8) under construction at the Peterson Builders, Inc. shipyard

Topics

kennedy space center workers orbiter opf bay adjustments keel yoke keel yoke device kyd discovery orbiter discovery support cargo carrier international cargo carrier icc sts mission sts russian russian cargo crane strela spacehab space system box shoss logistics items logistics items carrier oru transfer oru transfer device otd iss future iss payload double module spacehab double module element international space station launch pad b ksc spacehab oceaneering space system box cargo ship nasa