visibility Similar

Shuttle and 747 in the Mate-Demate Device (MDD)

Space shuttle STS-86 Rollover. NASA public domain image colelction.

National Aeronautics and Space Administration (NASA) Space Shuttle [Discovery flying over Washington. D.C., on final journey to its permanent museum home]

STS-120 - Public domain NASA photogrpaph

STS-133 - EOM - Public domain NASA photogrpaph

National Aeronautics and Space Administration (NASA) Space Shuttle [Discovery flying over Washington. D.C., on final journey to its permanent museum home]

KENNEDY SPACE CENTER, FLA. -- The wheels of Space Shuttle Endeavour make contact with runway 33 at the Shuttle Landing Facility, bringing to a close the 13-day, 18-hour, 48-minute, 5.74-million mile STS-113 mission to the International Space Station. Main gear touchdown was at 2:37:12 p.m. EST, nose gear touchdown was at 2:37:23 p.m., and wheel stop was at 2:38:25 p.m. Poor weather conditions thwarted landing opportunities until a fourth day, the first time in Shuttle program history that a landing has been waved off for three consecutive days. The vehicle carries the STS-113 crew, Commander James Wetherbee, Pilot Paul Lockhart and Mission Specialists Michael Lopez-Alegria and John Herrington, as well as the returning Expedition Five crew, Commander Valeri Korzun, ISS Science Officer Peggy Whitson and Flight Engineer Sergei Treschev. The installation of the P1 truss on the International Space Station was accomplished during the mission. KSC-02pp1903

Space Shuttle Challenger, Transfer - STS-13 / 41C

National Aeronautics and Space Administration (NASA) Space Shuttle [Discovery flying over Washington. D.C., on final journey to its permanent museum home]

code Related

Carried atop an orbiter transporter, the Space Shuttle orbiter Atlantis makes the short journey from Orbiter Processing Facility Bay 3 to the Vehicle Assembly Building (VAB). This photo was taken from the roof of the 525-foot-tall VAB. The "rollover" of the orbiter is one of the prelaunch milestones. Atlantis is being readied for the next mission, STS-86, which is targeted for a September launch. STS-86 will be the seventh of nine planned dockings of the Space Shuttle orbiter with the Russian Space Station Mir KSC-97PC1222

Carried atop an orbiter transporter, the Space Shuttle orbiter Atlantis makes the short journey from Orbiter Processing Facility Bay 3 to the Vehicle Assembly Building (VAB). This photo was taken from the roof of the 525-foot-tall VAB. The "rollover" of the orbiter is one of the prelaunch milestones. Atlantis is being readied for the next mission, STS-86, which is targeted for a September launch. STS-86 will be the seventh of nine planned dockings of the Space Shuttle orbiter with the Russian Space Station Mir KSC-97PC1221

Carried atop an orbiter transporter, the Space Shuttle orbiter Atlantis rolls into the transfer aisle of the Vehicle Assembly Building (VAB) . The "rollover" of the orbiter from the Orbiter Processing Facility to the nearby VAB is one of the prelaunch milestones. Atlantis is being readied for the next mission, STS-86, which is targeted for a September launch. STS-86 will be the seventh of nine planned dockings of the Space Shuttle orbiter with the Russian Space Station Mir KSC-97PC1226

The orbiter Atlantis, on its transporter, heads into the turn toward the Vehicle Assembly Building, in the background. In the VAB it will be raised to vertical and lifted up and into high bay 3 for stacking with its external tank and solid rocket boosters. Atlantis will fly on mission STS-98, the seventh construction flight to the International Space Station. The orbiter will carry in its payload bay the U.S. Laboratory, named Destiny, that will have five system racks already installed inside of the module. After delivery of electronics in the lab, electrically powered attitude control for Control Moment Gyroscopes will be activated. Atlantis is scheduled for launch on Jan. 18, 2001, at 2:44 a.m. EST, with a crew of five KSC00pp1826

The orbiter Atlantis rolls toward the open door of the Vehicle Assembly Building after leaving the Orbiter Processing Facility bay 3. In the VAB it will be raised to vertical and lifted up and into high bay 3 for stacking with its external tank and solid rocket boosters. Atlantis will fly on mission STS-98, the seventh construction flight to the International Space Station. The orbiter will carry in its payload bay the U.S. Laboratory, named Destiny, that will have five system racks already installed inside of the module. After delivery of electronics in the lab, electrically powered attitude control for Control Moment Gyroscopes will be activated. Atlantis is scheduled for launch on Jan. 18, 2001, at 2:44 a.m. EST, with a crew of five KSC-00pp1828

The orbiter Discovery rolls out of KSC's Orbiter Processing Facility Bay 2 en route to the Vehicle Assembly Building (VAB). Once inside the VAB, Discovery will be hoisted upright into a vertical position to be mated with an orange external tank and two white solid rocket boosters. Once mated, the orbiter becomes the Space Shuttle Discovery, slated for launch on STS-91, the ninth and final docking mission with the Russian Space Station Mir. The six-member crew of STS-91 will dock with Mir and pick up Mission Specialist Andrew Thomas, Ph.D., who will have been on Mir about four months, to return him to Earth. STS-91 is scheduled to launch June 2 at about 6:04 p.m. EDT KSC-98pc535

Inside the Vehicle Assembly Building (VAB), the orbiter Atlantis is lowered alongside the external tank and solid rocket boosters below on the Mobile Launcher Platform. Also visible are the three main engine nozzles, each measuring 7.8 feet across and 9.4 feet high. The 122-foot-long orbiter is easily accommodated inside the 525-foot-tall, 518-foot-wide VAB. After being mated with the tank and solid rocket boosters stack, Atlantis will be transported to Launch Pad 39A. Atlantis will fly on mission STS-101 to the International Space Station, where its crew of seven will prepare the Station for the arrival of the next pressurized module, the Russian-built Zvezda. Atlantis is expected to launch no earlier than April 17, 2000 KSC00pp0365

In Orbiter Processing Facility bay 3, the STS-106 crew familiarizes themselves with the payload bay of Space Shuttle orbiter Atlantis with the help of KSC employees as part of Crew Equipment Interface Test (CEIT) activities for their mission. The STS-106 crew members are Commander Terrence W. Wilcutt, Pilot Scott D. Altman, and Mission Specialists Edward T. Lu, Daniel C. Burbank, Yuri I. Malenchenko, Boris V. Morukov and Richard A. Mastracchio. Malenchenko and Morukov represent the Russian Aviation and Space Agency. On the 11-day mission, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module for the first long-duration crew, dubbed "Expedition One," which is due to arrive at the Station in late fall. STS-106 is scheduled to launch Sept. 8, 2000, at 8:31 a.m. EDT from Launch Pad 39B KSC-00pp0991

The Space Shuttle Atlantis is poised for liftoff on the STS-86 mission from Launch Pad 39A. Now that the Rotating Service Structure is rolled back, one of the final prelaunch milestones will be the loading of the external tank with approximately 500,000 gallons of liquid hydrogen and liquid oxygen to fuel the three main engines. STS-86 is slated to be the seventh docking of the Space Shuttle with the Russian Space Station Mir. Liftoff is targeted for Sept. 25 at 10:34 p.m. EDT during a preferred launch window which lasts six minutes and 45 seconds. Seven crew members will lift off for the scheduled 10-day flight. One of those crew members, David A. Wolf, will transfer to the Mir for an approximate four-month stay. He will replace U.S. astronaut C. Michael Foale, who will return to Earth with the remainder of the STS-86 crew. Foale has been on the Russian space station since mid-May KSC-97PC1417

Carried atop an orbiter transporter, the Space Shuttle orbiter Atlantis rolls out of Orbiter Processing Facility Bay 3, in background, en route to the Vehicle Assembly Building (VAB). This photo was taken from the roof of the VAB. The "rollover" of the orbiter is one of the prelaunch milestones. Atlantis is being readied for the next mission, STS-86, which is targeted for a September launch. STS-86 will be the seventh of nine planned dockings of the Space Shuttle orbiter with the Russian Space Station Mir KSC-97PC1225

description

Summary

Carried atop an orbiter transporter, the Space Shuttle orbiter Atlantis rolls out of Orbiter Processing Facility Bay 3, in background, en route to the Vehicle Assembly Building (VAB). This photo was taken from the roof of the VAB. The "rollover" of the orbiter is one of the prelaunch milestones. Atlantis is being readied for the next mission, STS-86, which is targeted for a September launch. STS-86 will be the seventh of nine planned dockings of the Space Shuttle orbiter with the Russian Space Station Mir

The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.

label_outline

Tags

kennedy space center orbiter transporter orbiter transporter atlantis rolls space shuttle orbiter atlantis rolls bay facility bay route vab roof rollover prelaunch milestones prelaunch milestones sts dockings space shuttle orbiter russian mir russian space station mir ksc space shuttle vehicle assembly building sts 86 russian space station mir ksc 97 pc 1225 russian space station mir background photo mission space station nasa
date_range

Date

11/08/1997
collections

in collections

Space Shuttle Program
place

Location

Kennedy Space Center, FL
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Space Shuttle Orbiter Atlantis Rolls, Russian Space Station Mir Ksc, Orbiter Transporter

STS074-321-019 - STS-074 - View of the nose of the shuttle Atlantis from Mir

KENNEDY SPACE CENTER, FLA. -- After leaving the Orbiter Processing Facility bay 2, the orbiter Endeavour, atop its transporter, rolls toward the Vehicle Assembly Building. In the VAB, it will be stacked with the external tank and solid rocket boosters atop the mobile launcher platform for its launch on mission STS-118. The mission will be Endeavour's first flight in more than four years. The shuttle has undergone extensive modifications, including the addition of safety upgrades already added to shuttles Discovery and Atlantis. Endeavour also features new hardware, such as the Station-to-Shuttle Power Transfer System that will allow the docked shuttle to draw electrical power from the station and extend its visits to the orbiting lab. Endeavour is targeted for launch on Aug. 7. Photo credit: NASA/Kim Shiflett KSC-07pd1709

CAPE CANAVERAL, Fla. - In the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida, external fuel tank, ET-138, for space shuttle Atlantis' STS-135 mission, is lowered into high bay-1 for joining with the twin solid rocket boosters on the mobile launcher platform. Shuttle Atlantis' move, or "rollover," from Orbiter Processing Facility-1 to the VAB is targeted for May 10. Once there it will be mated with the external tank and boosters. Atlantis and its crew of four will deliver the Raffaello multipurpose logistics module packed with supplies and spare parts to the International Space Station. STS-135 is targeted to launch June 28, and will be the last spaceflight for the Space Shuttle Program. Photo credit: NASA/Jack Pfaller KSC-2011-3043

NEWPORT NEWS, Va. (June 11, 2016) -- Mass Communication

U.S. Army Spc. Justin Cameron a Medic with Headquarters

KENNEDY SPACE CENTER, FLA. -- At the KSC Shuttle Landing Facility, the Joint Airlock Module, the gateway from which crew members aboard the International Space Station (ISS) will enter and exit the 470-ton orbiting research facility, is settled onto a flatbed trailer for transport to the Operations and Checkout Building in the KSC industrial area. There it will undergo vacuum chamber testing. It will then be moved to the Space Station Processing Facility (SSPF) for further prelaunch preparation and checkout. The massive, spindle-shaped airlock is 20 feet long, has a diameter of 13 feet at its widest point, and weighs six and a half tons. It was manufactured at NASA's Marshall Space Flight Center by the Huntsville division of The Boeing Company. The Space Shuttle Atlantis will carry the airlock to orbit on mission STS-104, the tenth International Space Station flight, currently targeted for liftoff in May 2001 KSC00pp1348

KENNEDY SPACE CENTER, Fla. -- Startled by the thunderous roar of the Space Shuttle Discovery’s engines as it lifts off, birds hurriedly leave the Launch Pad 39A area for a more peaceful site. Liftoff time for the 91st Shuttle launch and last Shuttle-Mir mission was 6:06:24 p.m. EDT June 2. On board Discovery are Mission Commander Charles J. Precourt; Pilot Dominic L. Gorie; and Mission Specialists Wendy B. Lawrence, Franklin R. Chang-Diaz, Janet Lynn Kavandi and Valery Victorovitch Ryumin. The nearly 10-day mission will feature the ninth and final Shuttle docking with the Russian space station Mir, the first Mir docking for the Space Shuttle orbiter Discovery, the first on-orbit test of the Alpha Magnetic Spectrometer (AMS), and the first flight of the new Space Shuttle super lightweight external tank. Astronaut Andrew S. W. Thomas will be returning to Earth as an STS-91 crew member after living more than four months aboard Mir KSC-98pc732

KENNEDY SPACE CENTER, FLA. -- Inside the Vehicle Assembly Building, the external tank for Endeavour is being lowered toward the mobile launcher platform for mating with the solid rocket boosters. Endeavour is currently targeted for rollover to the VAB July 5. Endeavour is the designated orbiter for mission STS-118, targeted for launch on Aug. 9 to the International Space Station. The mission will continue space station construction by delivering a third starboard truss segment, S5, as well as carrying the external stowage platform 3. Photo credit: NASA/Amanda Diller KSC-07pd1541

Space shuttle STS-86 Launch. NASA public domain image colelction.

Space Shuttle Atlantis, STS-84 Landing

First Class of Female Astronauts

A Marine with 2nd Supply Battalion, 2nd Marine Logistics

Topics

kennedy space center orbiter transporter orbiter transporter atlantis rolls space shuttle orbiter atlantis rolls bay facility bay route vab roof rollover prelaunch milestones prelaunch milestones sts dockings space shuttle orbiter russian mir russian space station mir ksc space shuttle vehicle assembly building sts 86 russian space station mir ksc 97 pc 1225 russian space station mir background photo mission space station nasa