visibility Similar

Corpsmen work with blood and plasma in a laboratory aboard the hospital ship USNS COMFORT (T-AH-20), underway in the Gulf in support of Operation Desert Storm

Sven Fischer, Defense Commissary Agency employee, adds

Vehicles, Karlskrona Swedish Navy Shipyard V29671

STS090-365-035 - STS-090 - BDS-04 - Hire on middeck with experiment

SITTING EFFECTS IN DROPLET COMBUSTION DCE DROP RIG

Grand Forks Air Force Base, Missile Alert Facility Oscar-Zero, Launch Control Equipment Building, State Highway 45, Cooperstown, Griggs County, ND

201014-N-RG482-0015 BREMERTON, Wash. (Oct. 14, 2020)

184-inch cyclotron. Rotor drive assembly (R.F. system). Photo taken 10/11/1949. 184"-1085 Principal Investigator/Project: Analog Conversion Project

A close up of a machine on a table. Mechanical hardware lab, work.

code Related

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are manufactured inside the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. The insulation includes thermal barriers that are used around hatches, thrusters and other open areas of the backshell to protect the joints from heat. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1595

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are manufactured inside the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. The insulation includes thermal barriers that are used around hatches, thrusters and other open areas of the backshell to protect the joints from heat. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1597

CAPE CANAVERAL, Fla. -- Chris Keeling, a United Space Alliance technician at NASA's Kennedy Space Center in Florida, manufactures the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1581

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are in a Keith thermal automation oven in the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. Inside the oven, the tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1576

CAPE CANAVERAL, Fla. -- John Livingston, a United Space Alliance engineer at NASA's Kennedy Space Center in Florida, describes the properties of the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The tiles are being manufactured and inspected in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1570

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are removed from a Keith thermal automation oven. Inside, the tiles were baked at 2,200 degrees F to cure their ceramic coating. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1587

CAPE CANAVERAL, Fla. -- -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, explains the properties of the thermal barriers that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1598

CAPE CANAVERAL, Fla. -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, explains the properties of the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1588

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are being manufactured in the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1580

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are manufactured inside the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. The insulation includes thermal barriers that are used around hatches, thrusters and other open areas of the backshell to protect the joints from heat. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1596

description

Summary

CAPE CANAVERAL, Fla. -- The heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule are manufactured inside the Thermal Protection System Facility at NASA's Kennedy Space Center in Florida. The insulation includes thermal barriers that are used around hatches, thrusters and other open areas of the backshell to protect the joints from heat. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin

Nothing Found.

label_outline

Tags

orion crew vehicle mpcv exploration deep space future kennedy space center cape canaveral heat shield tiles heat shield tiles backshell orion vehicle crew vehicle exploration flight eft exploration flight test eft capsule thermal protection system thermal protection system facility insulation barriers hatches thrusters areas joints first test flight frankie martin frankie martin ksc test flight high resolution nasa florida
date_range

Date

01/03/2012
place

Location

Kennedy Space Center, FL
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Exploration Flight Test Eft, Frankie Martin Ksc, Orion Crew Vehicle Mpcv Exploration Deep Space Future

Boardwalk crew at Silex Spring - Public Domain image, National Parks Gallery

[Gathering of HUD, Department of Energy, White House, and other officials to announce expansion of the President's] Better Buildings Challenge [to cover multifamily housing, as well as the launch of the Better Buildings Accelerators to support state and local government-led efforts to cut energy waste and eliminate market and technical barriers to greater building energy efficiency. HUD Secretary Shaun Donovan joined Energy Deputy Secretary Daniel Poneman, White House Council on Environmental Quality Chair Nancy Sutley, and Special Assistant to the President on Energy and Climate Change, Dan Utech, among other participants.]

CAPE CANAVERAL, Fla. – A view from above inside the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, shows the service module for the Orion spacecraft secured to a work stand. Technicians are preparing the three fairings for installation around the service module. The Orion spacecraft is being prepared for its first unpiloted flight test, Exploration Flight Test-1, or EFT-1, scheduled for launch atop a Delta IV rocket in September 2014. The Orion spacecraft is designed to carry astronauts to destinations not yet explored by humans. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. Orion is scheduled to launch atop NASA’s Space Launch System rocket in 2017. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Daniel Casper KSC-2013-4524

S124E006258 - STS-124 - Cables and Connectors

KENNEDY SPACE CENTER, FLA. -- Boeing technicians move a piece of hardware into position on Node 1 of the International Space Station (ISS) in KSC's Space Station Processing Facility in preparation for mating with Pressurized Mating Adapter (PMA)-2. The node is the first element of the ISS to be manufactured in the United States and is currently scheduled to lift off aboard the Space Shuttle Endeavour on STS-88 later this year, along with PMAs 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, Node 1 will function as a connecting passageway to the living and working areas of the ISS. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements KSC-98pc539

S131E007895 - STS-131 - Hatch Ingress Welcome OPS

Experts at Bureau of Standards study effect of corrosive soils on specimens of pipe. Washington, D.C., Aug. 8. Of interest to home builders the country over is the study being made by experts at the National Bureau of Standards of the effect of corrosive soils on pipes and protective materials. Samples of pipe which have been buried for four years in fifteen soils differing widely in their characteristics, are being tested. Included are several varieties of ferrous materials as well as copper, brass, and bronze. Soldered and brazed joints, protective materials, and pipe made of a composition of cement and asbestos are also represented. Walter Johnson, of the Bureau, is pictured removing graphitic corrosion from cast iron with an air-driven tool. The corrosion products are too hard to be removed with a brush or by chemical treatment, 8/8/38

S123E006563 - STS-123 - Behnken and Gorie in the hatch area of the ISS during Joint Operations

THERMAL SHOCK RIG 2, NASA Technology Images

S124E007707 - STS-124 - Hatch area between Node 2 and JLP

STS092-364-017 - STS-092 - Node 1/Unity deck hatch seal

S125E009464 - STS-125 - STS-125 MS1 Good exits the Airlock for EVA4

Topics

orion crew vehicle mpcv exploration deep space future kennedy space center cape canaveral heat shield tiles heat shield tiles backshell orion vehicle crew vehicle exploration flight eft exploration flight test eft capsule thermal protection system thermal protection system facility insulation barriers hatches thrusters areas joints first test flight frankie martin frankie martin ksc test flight high resolution nasa florida