visibility Similar

Filling mattress case with cotton linters. Mattress factory. San Angelo, Texas

QCSEE - QUICK CLEAN STOL EXPERIMENTAL ENGINE - NOZZLE AND WING NO. 5

Venda Ravioli Inc. (pasta-making plant), 31 Rathbone St., Providence, Rhode Island

Photo of event in Costa Rica. - USAID photogrpah

U.S. Air Force personnel with the 37th Airlift Squadron, Ramstein Air Base, Germany, prepare pallets of sacks of wheat flour in preparation for loading onto a U.S. Air Force C-130 Hercules aircraft which will fly into Sarajevo, Bosnia-Herzegovina on a relief mission. The three-year-old relief effort has been able to resume their mission after a five month hold due to aircraft receiving ground fire over Sarajevo. The C-130 crews fly two missions a day into the Sarajevo airport dropping off approximately 30 metric tons of wheat flour to the besieged residents

TEKA0007043, Tekniska museet, Sweden

American Folklife Center: Spreading fabric. Paterson New Jersey

U.S. Air Force Staff Sgt. Amanda Stinntt, 31st Rescue

LCROSS in Ames clean room N-240- Steve Ord inspects special made crate for transfer to Northrup Grumman Redondo Beach, CA where more calibration will be done before finally being sent for mating with the LRO spacecraft ARC-2008-ACD07-0073-433

code Related

CAPE CANAVERAL, Fla. -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, unloads the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The tiles are being manufactured and inspected in Kennedy's Thermal Protection System Facility. The tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1573

CAPE CANAVERAL, Fla. -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, explains the properties of the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1588

CAPE CANAVERAL, Fla. -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, removes the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule from a Keith thermal automation oven. Inside, the tiles were baked at 2,200 degrees F to cure their ceramic coating. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1586

CAPE CANAVERAL, Fla. -- Chris Keeling, a United Space Alliance technician at NASA's Kennedy Space Center in Florida, manufactures the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1578

CAPE CANAVERAL, Fla. -- Chris Keeling, a United Space Alliance technician at NASA's Kennedy Space Center in Florida, manufactures the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1581

CAPE CANAVERAL, Fla. -- Chris Keeling, a United Space Alliance technician at NASA's Kennedy Space Center in Florida, manufactures the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1584

CAPE CANAVERAL, Fla. -- Chris Keeling, a United Space Alliance technician at NASA's Kennedy Space Center in Florida, manufactures the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1585

CAPE CANAVERAL, Fla. -- John Livingston, a United Space Alliance engineer at NASA's Kennedy Space Center in Florida, describes the properties of the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The tiles are being manufactured and inspected in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1570

CAPE CANAVERAL, Fla. -- Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, put the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule in a Keith thermal automation oven. The tiles will be baked at 2,200 degrees F to cure their ceramic coating. The work to manufacture and inspect the tiles is taking place in Kennedy's Thermal Protection System Facility. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1574

Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, unpacks the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The tiles are being manufactured and inspected in Kennedy's Thermal Protection System Facility. The tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin KSC-2012-1572

description

Summary

Tim Wright, a United Space Alliance engineering manager at NASA's Kennedy Space Center in Florida, unpacks the heat shield tiles that will be installed to the backshell of the Orion Multi-Purpose Crew Vehicle's Exploration Flight Test EFT-1 capsule. The tiles are being manufactured and inspected in Kennedy's Thermal Protection System Facility. The tiles will be baked at 2,200 degrees F to cure their ceramic coating. EFT-1 will be used during Orion's first test flight in space. For more information, visit www.nasa.gov/orion. Photo credit: Frankie Martin

Nothing Found.

label_outline

Tags

orion crew vehicle mpcv exploration deep space future kennedy space center tim wright tim wright space alliance manager unpacks heat shield tiles heat shield tiles backshell orion vehicle crew vehicle exploration flight eft exploration flight test eft capsule thermal protection system thermal protection system facility degrees degrees f cure first test flight frankie martin frankie martin ksc test flight high resolution nasa florida cape canaveral
date_range

Date

01/03/2012
place

Location

Kennedy Space Center / Cape Canaveral Air Force Station Fire Station 2 ,  28.52650, -80.67093
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Exploration Flight Test Eft, Degrees F, Frankie Martin Ksc

Beef slices coated with water glaze +10 degrees F, 5 months top side

A boon--Hill's genuine magnetic anti-headache cap--A sure cure

THERMAL BARRIER SPECIMENS, NASA Technology Images

Beef slices coated with Flavor-Tex +10 degrees F, 5 months bottom side

At Nellis Air Force Base (AFB), Nevada (NV), US Air Force (USAF) STAFF Sergeant (SSGT) Randy Crosslin, unpacks his back pack near his B-2 Spirit bomber. A Crew CHIEF and member of the 509th Aircraft Maintenance Squadron (AMXS), from Whiteman Air Force Base (AFB), Missouri (MO)

STS109-716-012 - STS-109 - EVA 1 - Linnehan unpacks new Solar Array

AS11-40-5931 - Apollo 11 - Apollo 11 Mission image - Astronaut Edwin Aldrin unpacks experiments from the Lunar Module

Texas Air National Guard (ANG) Security Forces Squadron (SFS) unpacks their equipment in New Orleans, Louisiana (LA). The squadrons will conduct search and rescue missions in the aftermath of Hurricane Katrina

CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, technicians dressed in clean-room suits line up the middle back shell tile panel for installation on the Orion crew module. Preparations are underway for Exploration Flight Test-1, or EFT-1. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch later this year atop a Delta IV rocket from Cape Canaveral Air Force Station in Florida to an altitude of 3,600 miles above the Earth's surface. The two-orbit, four-hour flight test will help engineers evaluate the systems critical to crew safety including the heat shield, parachute system and launch abort system. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Dimitri Gerondidakis KSC-2014-3481

STS083-489-028 - STS-083 - HHDTC - PS Linteris unpacks hardware from its middeck locker

Card Number 34, Frankie Kemble, from the Actors and Actresses series (N145-6) issued by Duke Sons & Co. to promote Duke Cigarettes

Card Number 36, Frankie Kemble, from the Actors and Actresses series (N145-6) issued by Duke Sons & Co. to promote Duke Cigarettes

Topics

orion crew vehicle mpcv exploration deep space future kennedy space center tim wright tim wright space alliance manager unpacks heat shield tiles heat shield tiles backshell orion vehicle crew vehicle exploration flight eft exploration flight test eft capsule thermal protection system thermal protection system facility degrees degrees f cure first test flight frankie martin frankie martin ksc test flight high resolution nasa florida cape canaveral