visibility Similar

Inside Building 50, US-5 being stacked on US-4

STS060-301-028 - STS-060 - ECLiPSE rack in the Spacehab module

Inside Building 50, US-5 being stacked on US-4

KENNEDY SPACE CENTER, FLA. -- The Multi-Purpose Logistics Module (MPLM) called Raffaello arrives in its shipping canister at the Space Station Processing Facility (SSPF). There it will undergo testing, joining the first Italian-built MPLM, Leonardo, in the SSPF. One of Italy's major contributions to the ISS program, the MPLM is a reusable logistics carrier and the primary delivery system used to resupply and return station cargo requiring a pressurized environment. Weighing nearly 4.5 tons, the Raffaello measures 21 feet long and 15 feet in diameter. Raffaello is scheduled to be launched on mission STS-100 July 27, 2000 KSC-99pp1019

CAPE CANAVERAL, Fla. – Inside the Assembly and Refurbishment Facility at NASA's Kennedy Space Center in Florida, workers attach cables to the Ares I-X forward skirt, which was transported from the Astrotech facility. The segment will be lifted off the transporter and placed on supports on the floor. United Space Alliance, under a subcontract to ATK, will complete the integration and assembly of the forward skirt components in the ARF. It will then be moved to the Vehicle Assembly Building high bay 3 for stacking operations. The forward skirt is the initial piece of first-stage hardware in preparation for the July 2009 test flight of the agency's next-generation spacecraft and launch vehicle system. Built entirely of armored steel, the 14,000-pound segment is seven feet tall and 12-1/4 feet wide. Photo credit: NASA/Kim Shiflett KSC-2009-1312

CAPE CANAVERAL, Fla. – Inside Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, a large crane lifts the remote manipulator system (RMS) robotic arm away from space shuttle Atlantis’ payload bay. The RMS will be transported to NASA’s Johnson Space Center in Houston for possible use on future spaceflights. The work is part of the Space Shuttle Program’s transition and retirement processing of shuttle Atlantis. The shuttle is being prepared for display at the Kennedy Space Center Visitor Complex. Photo credit: NASA/Jim Grossmann KSC-2011-8292

Saturn V static testing stage - Saturn Apollo Program

NASA's Lunar Reconnaissance Orbiter (LRO) Spacecraft TEST RUN TO AFB

CAPE CANAVERAL, Fla. - Containers carrying the first set of Ogive panels for the Orion Launch Abort System are being offloaded for transfer into the Launch Abort System Facility at NASA’s Kennedy Space Center in Florida. During processing, the Ogive panels will enclose and protect the Orion spacecraft and attach to the Launch Abort System. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit www.nasa.gov/orion. Photo credit: Daniel Casper KSC-2014-2056

code Related

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device begins to lift the Raffaello multi-purpose logistics module from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6146

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device begins to lift the Raffaello multi-purpose logistics module from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6145

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a special payload removal device is used to lift the Raffaello multi-purpose logistics module high above Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6149

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, the payload canister doors are completely closed around the Raffaello multi-purpose logistics module after a special payload removal device was used to remove it from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6156

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device lifts the Raffaello multi-purpose logistics module high above Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6148

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, doors begin to close around the Raffaello multi-purpose logistics module after it was secured in the payload canister. A special payload removal device was used to remove it from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6155

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as a special payload removal device is used to transfer the Raffaello multi-purpose logistics module from Atlantis’ cargo bay to the payload canister. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6152

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, Atlantis’ cargo bay is empty after a special payload removal device was used to remove the Raffaello multi-purpose logistics module and transfer it to a payload canister. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6157

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a technician monitors the progress of a special crane as it lifts the forward reaction control system away from space shuttle Atlantis. The system provided some of the maneuvering capabilities to the spacecraft during its missions. Atlantis glided to a landing, July 21, 2011, at Kennedy Space Center’s Shuttle Landing Facility, completing NASA’s final space shuttle mission, STS-135. The shuttle is in OPF-2 being decommissioned and prepared for eventual display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: Jim Grossmann KSC-2011-6449

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a special payload removal device is used to lift the Raffaello multi-purpose logistics module away from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman KSC-2011-6151

description

Summary

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 (OPF-2) at NASA’s Kennedy Space Center in Florida, a special payload removal device is used to lift the Raffaello multi-purpose logistics module away from Atlantis’ cargo bay. Raffaello will then be readied for transport to the Space Station Processing Facility where its contents will be unloaded. Atlantis completed NASA’s final space shuttle mission, STS-135, after landing at the center’s Shuttle Landing Facility, July 21, 2011, at 5:57 a.m. EDT. Following removal of all payloads in Atlantis’ cargo bay, workers will begin to prepare the spacecraft for eventual permanent display at the Kennedy Space Center Visitor Complex. Photo credit: Jim Grossman

The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.

label_outline

Tags

atlantis mplm opf sspf kennedy space center cape canaveral orbiter opf nasa kennedy space center payload raffaello logistics module logistics module atlantis cargo bay atlantis cargo bay transport space station contents space shuttle mission sts center shuttle workers spacecraft kennedy space center visitor complex jim grossman jim grossman ksc visitor complex space shuttle high resolution nasa
date_range

Date

02/08/2011
collections

in collections

Space Shuttle Program
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Atlantis Mplm Opf Sspf, Atlantis Cargo Bay, Jim Grossman Ksc

STS-335 STS-135 ATLANTIS ENGINE-1 MOVE FROM ENGINE SHOP TO OPF-1 2010-5806

S135E009256 - STS-135 - Interior View of Node 2 and Raffaello

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, members of the STS-124 crew get a close look at equipment on the Japanese Experiment Module, called Kibo, including the Remote Manipulator System, or RMS, two robotic arms that support operations on the outside of the Kibo. Crew members are at Kennedy for a crew equipment interface test that includes familiarization with tools and equipment that will be used on the mission. The STS-124 mission is the second of three flights that will launch components to complete the Japanese pressurized module, the Kibo laboratory. The mission will include two spacewalks to install the new lab and its remote manipulator system. The lab's logistics module, which will have been installed in a temporary location during STS-123, will be attached to the new lab. Photo credit: NASA/Kim Shiflett KSC-08pd0058

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, space shuttle Atlantis' main engines and solid rocket boosters ignite on Launch Pad 39A leaving behind a billow of steam as it lifts off on its STS-135 mission to the International Space Station. Atlantis with its crew of four; Commander Chris Ferguson, Pilot Doug Hurley, Mission Specialists Sandy Magnus and Rex Walheim, lifted off at 11:29 a.m. EDT on July 8, 2011 to deliver the Raffaello multi-purpose logistics module packed with supplies and spare parts for the International Space Station. Atlantis also will fly the Robotic Refueling Mission experiment that will investigate the potential for robotically refueling existing satellites in orbit. In addition, Atlantis will return with a failed ammonia pump module to help NASA better understand the failure mechanism and improve pump designs for future systems. STS-135 is the 33rd flight of Atlantis, the 37th shuttle mission to the space station, and the 135th and final mission of NASA's Space Shuttle Program. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Tony Gray and Kevin O'Connell KSC-2011-5422

S135E009331 - STS-135 - View of Raffaello in the Atlantis Payload Bay

S135E009167 - STS-135 - Interior View of Node 2 and Raffaello

CAPE CANAVERAL, Fla. - In the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida, external fuel tank, ET-138, for space shuttle Atlantis' STS-135 mission, is lowered into high bay-1 for joining with the twin solid rocket boosters on the mobile launcher platform. Shuttle Atlantis' move, or "rollover," from Orbiter Processing Facility-1 to the VAB is targeted for May 10. Once there it will be mated with the external tank and boosters. Atlantis and its crew of four will deliver the Raffaello multipurpose logistics module packed with supplies and spare parts to the International Space Station. STS-135 is targeted to launch June 28, and will be the last spaceflight for the Space Shuttle Program. Photo credit: NASA/Jack Pfaller KSC-2011-3043

CAPE CANAVERAL, Fla. -- Seen through the open bay door of the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida, space shuttle Discovery is being prepared for its move to Orbiter Processing Facility-1 (OPF-1). Discovery is switching places with shuttle Endeavour which has been undergoing decommissioning activities in OPF-1. Both shuttles will stop briefly outside OPF-3 for a "nose-to-nose" photo opportunity. Discovery then will be rolled into OPF-1 and Endeavour into the VAB. In OPF-1, Discovery will undergo further preparations for public display at the Smithsonian's National Air and Space Museum Steven F. Udvar-Hazy Center in Virginia. Endeavour will be stored in the VAB until October when it will be moved into OPF-2 for further work to get it ready for public display at the California Science Center in Los Angeles. For more information, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Dimitri Gerondidakis KSC-2011-6415

S135E007420 - STS-135 - Magnus in Raffaello

S114E7084 - STS-114 - Raffaello interior

STS077-312-036 - STS-077 - View of the contents of the Endeavour's payload bay

S135E009152 - STS-135 - Interior View of Node 2 and Raffaello

Topics

atlantis mplm opf sspf kennedy space center cape canaveral orbiter opf nasa kennedy space center payload raffaello logistics module logistics module atlantis cargo bay atlantis cargo bay transport space station contents space shuttle mission sts center shuttle workers spacecraft kennedy space center visitor complex jim grossman jim grossman ksc visitor complex space shuttle high resolution nasa