visibility Similar

מועדון לחיילים, תל אביב, רח' אחד העם-ZKlugerPhotos-00132jw-09071706851295c2

BENDING FATIGUE TEST BEING CONDUCTED ON A HPF STATER BLADE

Conversion. Watch cases to war production. Luxury production gives way to war Production. Preparing the last batch of ladies' compacts for the plating room in a large Kentucky plant now converted to the manufacture of machine gun and carbine parts, bomb fuse baffles, compass cases and other essentials for war. Wadsworth Watch Company, Louisville, Kentucky

Bezetting bedrijf Tealtronic; in de bezette fabriek

Sandvikens Järnverk (Sandvikens Jernverk). Stålforskning. Jarnets Metallurgi, Sverige

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, STS-114 crew members get hands-on experience with a Video Stanchion Support Assembly (VSSA). From left are Mission Specialist Soichi Noguchi, Commander Eileen Collins and Mission Specialists Charles Camarda and Stephen Robinson. Noguchi is with the Japan Aerospace Exploration Agency, JAXA. Camarda is a new addition to the mission crew. The STS-114 crew is at KSC to take part in crew equipment and orbiter familiarization.

NASA TRADES REVISED APPRENTICESHIP STANDARDS - Glenn Research Center History

Conversion. Watch cases to war production. Luxury production gives way to war Production. Preparing the last batch of ladies' compacts for the plating room in a large Kentucky plant now converted to the manufacture of machine gun and carbine parts, bomb fuse baffles, compass cases and other essentials for war. Wadsworth Watch Company, Louisville, Kentucky

Coil winding, use of tapered board on lateral bend. Photograph taken March 28, 1951. Bevatron-407

code Related

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (left) and Christer Fugelsang (far right) inspect ammonia tanks, part of the payload for their mission. Fugelsang is with the European Space Agency. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3543

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (top right) and Christer Fugelsang (bottom right) inspect ammonia tanks, part of the payload for their mission. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3541

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a worker demonstrates an attachment point on ammonia tanks while STS-128 Mission Specialist John "Danny" Olivas (far right) looks on. The tanks are part of the payload for their upcoming STS-128 mission. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3544

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialist John "Danny" Olivas lies on a carrier while unbolting equipment, a task required for the mission. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3545

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialist John "Danny" Olivas lies on a carrier while unbolting equipment, a task required for the mission. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3546

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, STS-134 Commander Mark Kelly, left, and Mission Specialist Roberto Vittori with the European Space Agency check out a tool they'll be using in space. The six STS-134 astronauts are at Kennedy participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training and familiarization of the payload they'll be delivering to the International Space Station. Space shuttle Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Cory Huston KSC-2010-5544

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (left) and Nicole Stott (right) look at tiles on the underside of space shuttle Discovery. At center, Mission Specialist Christer Fuglesang holds a camera. The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3598

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members are lowered into space shuttle Discovery's payload bay to check equipment. At left is Mission Specialist John "Danny" Olivas and at right is Mission Specialist Christer Fuglesang. The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3604

CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida, STS-128 crew members check out storage containers they will use on the mission. From left are Mission Specialists John "Danny" Olivas, Christer Fuglesang, Patrick Forrester and Jose Hernandez, and Commander Rick Sturckow (pointing). The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3595

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (second from left) and Christer Fugelsang (right) inspect ammonia tanks, part of the payload for their mission. Fugelsang is with the European Space Agency. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann KSC-2009-3542

description

Summary

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-128 Mission Specialists John "Danny" Olivas (second from left) and Christer Fugelsang (right) inspect ammonia tanks, part of the payload for their mission. Fugelsang is with the European Space Agency. Members of the STS-128 crew are at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on space shuttle Discovery. The STS-128 mission is targeted to launch on Aug. 6. Photo credit: NASA/Jim Grossmann

The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.

Nothing Found.

label_outline

Tags

ceit kennedy space center cape canaveral sts specialists john mission specialists john danny olivas christer fugelsang christer fugelsang ammonia tanks ammonia tanks payload european european space agency equipment interface test crew equipment interface test hardware flight hardware science storage racks storage racks international space station discovery space shuttle discovery jim grossmann crew members space shuttle high resolution nasa
date_range

Date

04/06/2009
collections

in collections

Space Shuttle Program
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Christer Fugelsang, Mission Specialists John, Fugelsang

S128E007880 - STS-128 - Olivas at JPM window

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility at NASA's Kennedy Space Center, STS-115 Mission Specialist Daniel Burbank is practicing folding a sequential shunt unit launch to activation multilayer installation blanket. Burbank and other crew members are at the center for Crew Equipment Interface Test activities. Equipment familiarization is a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1181

Vanmiddag heeft Minister Tuijnman in Flevopolder startsein

S117E06631 - STS-117 - Olivas poses with EMUs on the MDDK of STS-117 Space Shuttle Atlantis

Vanmiddag heeft Minister Tuijnman in Flevopolder startsein

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-122 crew members inspect the Columbus European Laboratory, part of the payload on their mission. Seen here is Commander Steve Frick. The crew is participating in a crew equipment interface test that provides opportunities for hands-on experience with payloads and equipment. The other crew members are Pilot Alan Poindexter and Mission Specialists Rex Walheim, Stan Love, Leland Melvin and Hans Schlegel, who represents the European Space Agency. The 24th mission to the International Space Station, STS-122 will also include the Multi-Purpose Experiment Support Structure - Non-Deployable (MPESS-ND). Launch of STS-122 on Space Shuttle Discovery is scheduled no earlier than October. Photo credit: NASA/Kim Shiflett KSC-07pd0058

KENNEDY SPACE CENTER, FLA. -- The crew members of mission STS-116 gather around the table for breakfast before suiting up for launch aboard Space Shuttle Discovery. From left are Mission Specialist Nicholas Patrick, Pilot William Oefelein, Mission Specialist Joan Higginbotham, Commander Mark Polansky, and Mission Specialists Sunita Williams, Robert Curbeam and Christer Fuglesang, who represents the European Space Agency. Williams will replace the International Space Station's Expedition 14 crew member Thomas Reiter, who will return to Earth aboard Discovery in her place. This is Discovery's 33rd mission and the first night launch since 2003. The 20th shuttle mission to the International Space Station, STS-116 carries another truss segment, P5. It will serve as a spacer, mated to the P4 truss that was attached in September. After installing the P5, the crew will reconfigure and redistribute the power generated by two pairs of U.S. solar arrays. Landing is expected Dec. 19 at KSC. Photo credit: NASA/Kim Shiflett KSC-06pd2675

S117E07584 - STS-117 - Reilly and Olivas install a water to hydrogen vent on the outside of the U.S. Laboratory during EVA 3

S128E007886 - STS-128 - Olivas passing through PMA-2

KENNEDY SPACE CENTER, FLA. -- In the Space Life Sciences Lab, Lanfang Levine, with Dynamac Corp., transfers material into a sample bottle for analysis. She is standing in front of new equipment in the lab that will provide gas chromatography and mass spectrometry. The equipment will enable analysis of volatile compounds, such as from plants. The 100,000 square-foot facility houses labs for NASA’s ongoing research efforts, microbiology/microbial ecology studies and analytical chemistry labs. Also calling the new lab home are facilities for space flight-experiment and flight-hardware development, new plant growth chambers, and an Orbiter Environment Simulator that will be used to conduct ground control experiments in simulated flight conditions for space flight experiments. The SLS Lab, formerly known as the Space Experiment Research and Processing Laboratory or SERPL, provides space for NASA’s Life Sciences Services contractor Dynamac Corporation, Bionetics Corporation, and researchers from the University of Florida. NASA’s Office of Biological and Physical Research will use the facility for processing life sciences experiments that will be conducted on the International Space Station. The SLS Lab is the magnet facility for the International Space Research Park at KSC being developed in partnership with Florida Space Authority.

S117E06886 - STS-117 - Reilly and Olivas on EVA 1 during STS-117

KENNEDY SPACE CENTER, FLA. -- In the Orbiter Processing Facility, STS-99 Mission Specialists Janet Lynn Kavandi (Ph.D.) and Gerhard P.J. Thiele look over part of the Shuttle Radar Topography Mission (SRTM), primary payload for their mission, as part of a Crew Equipment Interface Test (CEIT). Also taking part in the CEIT are Commander Kevin R. Kregel, Pilot Dominic L. Pudwill Gorie, and Mission Specialists Janice Voss (Ph.D.) and Mamoru Mohri. Mohri is with the National Space Development Agency (NASDA) of Japan, and Thiele is with the European Space Agency. The CEIT provides an opportunity for crew members to check equipment and facilities that will be aboard the orbiter during their mission. The SRTM is a specially modified radar system that will gather data for the most accurate and complete topographic map of the Earth's surface that has ever been assembled. SRTM will make use of radar interferometry, wherein two radar images are taken from slightly different locations. Differences between these images allow for the calculation of surface elevation, or change. The SRTM hardware will consist of one radar antenna in the shuttle payload bay and a second radar antenna attached to the end of a mast extended 60 meters (195 feet) out from the shuttle. STS-99 is scheduled to launch Sept. 16 at 8:47 a.m. from Launch Pad 39A KSC-99pp0999

Topics

ceit kennedy space center cape canaveral sts specialists john mission specialists john danny olivas christer fugelsang christer fugelsang ammonia tanks ammonia tanks payload european european space agency equipment interface test crew equipment interface test hardware flight hardware science storage racks storage racks international space station discovery space shuttle discovery jim grossmann crew members space shuttle high resolution nasa