Similar
KENNEDY SPACE CENTER, FLA. - In the transfer aisle of the Vehicle Assembly Building, Atlantis seems to float above the floor as it is suspended by an overhead crane and sling. The orbiter will be raised to a vertical position and then will be lifted into high bay 3 for stacking with the external tank and solid rocket boosters already installed on the mobile launcher platform. After mating with the external tank and boosters, Atlantis will undergo a shuttle interface test and other prelaunch processing. Atlantis' launch window begins Aug. 28. During its 11-day mission to the International Space Station, the STS-115 crew of six astronauts will continue construction of the station and install their cargo, the Port 3/4 truss segment with its two large solar arrays. Photo credit: NASA/Kim Shiflett KSC-06pd1658
An overhead view of the space shuttle Enterprise moving toward the shuttle assembly building at Space Launch Complex Six aboard its specially-designed 76-wheel transporter
Landing - Orbiter Challenger - Completion of 41G Mission - KSC
National Aeronautics and Space Administration (NASA) Space Shuttle [Discovery flying over Washington. D.C., on final journey to its permanent museum home]
KENNEDY SPACE CENTER, FLA. -- Seen from inside the Orbiter Processing Facility bay 3, space shuttle Discovery begins rolling out for the short trip to the Vehicle Assembly Building. In the VAB, the shuttle will be lifted and mated with the external tank and solid rocket boosters on the mobile launcher platform. Discovery is targeted for launch to the International Space Station for mission STS-120 on Oct. 23. The crew will be delivering and installing the Italian-built U.S. Node 2, named Harmony. The pressurized module will act as an internal connecting port and passageway to additional international science labs and cargo spacecraft. In addition to increasing the living and working space inside the station, it also will serve as a work platform outside for the station's robotic arm. Photo credit: NASA/Charisse Nahser KSC-07pd2537
STS-135 - Public domain NASA photogrpaph
NASA X-38, Dryden history gallery
Shuttle Enterprise Flight to New York
STS098-357-014 - STS-098 - Atlantis empty payload bay with Earth limb
Related
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour is ready for the rollover to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0265
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour turns away from the Orbiter Processing Facility to start the rollover to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0268
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls out of the Orbiter Processing Facility on its way to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0266
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls into the transfer aisle of the Vehicle Assembly Building where it will be lifted into high bay 1. There, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0272
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls toward the Vehicle Assembly Building after leaving the Orbiter Processing Facility. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0270
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour begins the rollover to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0269
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour turns toward the open door of the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0271
KENNEDY SPACE CENTER, FLA. -- On its transporter, space shuttle Endeavour rolls into the transfer aisle of the Vehicle Assembly Building where it will be lifted into high bay 1. There, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0273
KENNEDY SPACE CENTER, FLA. -- In the transfer aisle of the Vehicle Assembly Building, the suspended space shuttle Endeavour is slowly being raised to a vertical position. It will then be lifted up into high bay 1 to be attached to its external fuel tank and solid rocket boosters in preparation for launch on the STS-123 mission, targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd0277
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour settles on its transporter for the trip to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann KSC-08pd0264
Summary
KENNEDY SPACE CENTER, FLA. -- Inside the Orbiter Processing Facility, space shuttle Endeavour settles on its transporter for the trip to the Vehicle Assembly Building. In high bay 1 of the VAB, Endeavour will be attached to its external fuel tank and solid rocket boosters in preparation for its upcoming mission, STS-123, to the International Space Station targeted for March 11. The mission will deliver the first section of the Japan Aerospace Exploration Agency's Kibo laboratory and the Canadian Space Agency's two-armed robotic system, Dextre. Photo credit: NASA/Jim Grossmann
The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.
Tags
ov 105
kennedy space center
orbiter
endeavour
space shuttle endeavour
transporter
trip
bay
vab
fuel
fuel tank
rocket
boosters
rocket boosters
preparation
sts
international space station
section
first section
japan
aerospace
exploration
japan aerospace exploration agency
kibo
laboratory
kibo laboratory
canadian
canadian space agency
system
dextre
jim
grossmann
space shuttle
vehicle assembly building
high resolution
nasa
Date
1960 - 1969
in collections
Location
Source
NASA
Link
Copyright info
Public Domain Dedication (CC0)