Similar
S35-10-023 - STS-035 - STS-35 Pilot Gardner reads a computer printout on OV-102's middeck
S96E5083 - STS-096 - MS Tokarev and MS Jernigan enter PMA-2
S42-25-003 - STS-042 - IML-1 Spacelab module and tunnel in payload bay
Pallets of supplies roll out the back of a 63rd Air Wing C-141B Starlifter aircraft flying over McMurdo Station, Antarctica. This is the last mission of its type for the 63rd
S38-25-002 - STS-038 - Public domain NASA photogrpaph
KENNEDY SPACE CENTER, FLA. -- STS-95 Mission Specialist Pedro Duque of Spain, representing the European Space Agency (ESA), checks out equipment inside the SPACEHAB module at the SPACEHAB Payload Processing Facility (SPPF), Cape Canaveral. The STS-95 crew are participating in SPACEHAB familiarization at the SPPF. The mission, scheduled to launch Oct. 29, includes research payloads such as the Spartan solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process KSC-98pc981
s133E012140 - STS-133 - Shuttle ODS
S39-17-012 - STS-039 - STS-39 crew activities
STS076-323-025 - STS-076 - Checkout procedures of the Simplified Aid for EVA Rescue (SAFER) unit
Related
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members discuss their examination of the orbiter Atlantis, seen above them. From left are Mission Specialists Steven MacLean, who represents the Canadian Space Agency, Heidemarie Stefanyshyn-Piper, Daniel Burbank and Joseph Tanner. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1191
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine the edge of the wing on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Steven MacLean, who represents the Canadian Space Agency, and Joseph Tanner. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1192
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Joseph Tanner takes a closer look at the orbiter Atlantis, the designated launch vehicle for the mission.. Looking on (from left) are Mission Specialists Daniel Burbank, Heidemarie Stefanyshyn-Piper and Steven MacLean, who represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1194
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine tiles on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Heidemarie Stefanyshyn-Piper, Joseph Tanner and Steven MacLean, who represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1189
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine tiles on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Joseph Tanner, Daniel Burbank and Steven MacLean, who represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1190
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members examine tiles on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Steven MacLean and Daniel Burbank. MacLean represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1186
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Specialist Joseph Tanner gets familiar with a camera that is a mockup of one the crew will use to take photographs on-orbit. With him are Mission Specialists Steven MacLean, who represents the Canadian Space Agency, and Heidemarie Stefanyshyn-Piper. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1196
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members are examining the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Daniel Burbank, Heidemarie Stefanyshyn-Piper and Joseph Tanner. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1184
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 Mission Speciailsts Steven MacLean and Heidemarie Stefanyshyn-Piper (center) review procedures for launch while inspecting the orbiter Atlantis. The crew is at KSC for Crew Equipment Interface Test activities, which involve equipment familiarization and inspection, a routine part of astronaut training and launch preparations. The STS-115 mission will deliver the second port truss segment, the P3/P4 truss, to the International Space Station. The crew will attach the P3 to the first port truss segment, the P1 truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1223
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members look over the cockpit on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Joseph Tanner, Daniel Burbank, Heidemarie Stefanyshyn-Piper and Steven MacLean, who represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett KSC-06pd1193
Summary
KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, STS-115 crew members look over the cockpit on the orbiter Atlantis, the designated launch vehicle for their mission. From left are Mission Specialists Joseph Tanner, Daniel Burbank, Heidemarie Stefanyshyn-Piper and Steven MacLean, who represents the Canadian Space Agency. The crew is at the center for Crew Equipment Interface Test activities, which involves equipment familiarization, a routine part of astronaut training and launch preparations. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch on Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Kim Shiflett
The Space Shuttle program was the United States government's manned launch vehicle program from 1981 to 2011, administered by NASA and officially beginning in 1972. The Space Shuttle system—composed of an orbiter launched with two reusable solid rocket boosters and a disposable external fuel tank— carried up to eight astronauts and up to 50,000 lb (23,000 kg) of payload into low Earth orbit (LEO). When its mission was complete, the orbiter would re-enter the Earth's atmosphere and lands as a glider. Although the concept had been explored since the late 1960s, the program formally commenced in 1972 and was the focus of NASA's manned operations after the final Apollo and Skylab flights in the mid-1970s. It started with the launch of the first shuttle Columbia on April 12, 1981, on STS-1. and finished with its last mission, STS-135 flown by Atlantis, in July 2011.
Space Shuttle Atlantis was a space shuttle that was operated by NASA as part of the Space Shuttle program. It was the fourth operational shuttle built, and the last one to be built before the program was retired in 2011. Atlantis was named after the first research vessel operated by the Woods Hole Oceanographic Institution, and it made its first flight in October 1985. Over the course of its career, Atlantis completed 33 missions and spent a total of 307 days in space. Its last mission was STS-135, which was the final mission of the Space Shuttle program. Atlantis is now on display at the Kennedy Space Center Visitor Complex in Florida. Space Shuttle Atlantis (Orbiter Vehicle Designation: OV-104) was one of the four first operational orbiters in the Space Shuttle fleet of NASA, the space agency of the United States. (The other two are Discovery and Endeavour.) Atlantis was the fourth operational shuttle built. Atlantis is named after a two-masted sailing ship that operated from 1930 to 1966 for the Woods Hole Oceanographic Institute. Atlantis performed well in 25 years of service, flying 33 missions.
Nothing Found.