visibility Similar

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, a crane is attached to the shipping container holding the Fine Guidance Sensor, or FGS. The crane will help remove the cover. The FGS will be integrated onto the Orbital Replacement Unit carrier in the clean room of the facility. The sensor will extend the life of the pointing control system on the Hubble Space Telescope. On the mission, this FGS will replace one of the three sensors that is failing and thus outfit the telescope with two completely healthy units, which are needed. A third, older FGS aboard the telescope will provide additional target-pointing efficiency and redundancy. Space shuttle Atlantis is targeted to launch on the STS-125 mission Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2274

CAPE CANAVERAL, Fla. – In the Payload Hazardous Servicing Facility at NASA’s Kennedy Space Center, crew members with the STS-125 mission get a close look at some of the equipment associated with their mission to service NASA’s Hubble Space Telescope. In the foreground, center, are Mission Specialists Mike Massimino and Michael Good, looking at the box containing the Cosmic Origins Spectrograph, or COS, on the orbital replacement unit carrier. COS will be the most sensitive ultraviolet spectrograph ever flown on Hubble and will probe the "cosmic web" - the large-scale structure of the universe whose form is determined by the gravity of dark matter and is traced by galaxies and intergalactic gas. The STS-125 crew is taking part in a crew equipment interface test, which provides experience handling tools, equipment and hardware they will use on their mission. Space shuttle Atlantis is targeted to launch on the STS-125 mission Oct. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2557

COMMUNICATION TECHNOLOGY SATELLITE CTS PROJECT

STEREO (Solar TErrestrial RElations Observatory) SPACECRAFT SHIPPING

Workers inside the vacuum chamber in the Operations and Checkout Building watch as an overhead crane lowers the Joint Airlock Module inside. The airlock is being tested for leaks. The module is the gateway from which crew members aboard the International Space Station (ISS) will enter and exit the 470-ton orbiting research facility. The airlock is a critical element of the ISS because of design differences between American and Russian spacesuits. The Joint Airlock Module provides a chamber where astronauts from every nation can suit up for space walks to conduct maintenance and construction work or to do science experiments outside the Station. The Space Shuttle Atlantis will carry the airlock to orbit on mission STS-104, the 10th International Space Station flight, currently targeted for liftoff in May 2001. The Shuttle crew will secure the airlock to the right side of Unity, the American-built connecting node that currently comprises one-third of the current Space Station, along with the Russian modules Zarya and Zvezda KSC-00pp1407

ARES 7 AXIS MILLING EQUIPMENT AND FACILITIES. 1000170

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Discovery's payload bay doors are being closed. The cargo consists of the integrated truss structure S6 and solar arrays for the STS-119 mission to the International Space Station. During Discovery's 14-day mission, the shuttle's seven astronauts will install the S6 truss to the starboard side of the space station, completing the station's truss, or backbone. Launch of Discovery on the STS-119 mission is targeted for Feb. 12. Photo credit: NASA/Dimitri Gerondidakis KSC-2009-1289

CAPE CANAVERAL, Fla. - The Lightweight Multi-Purpose Experiment Support Structure Carrier with the flexible hose rotary coupler is installed in the payload canister in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. The carrier is part of space shuttle Endeavour's payload on the STS-126 mission to the International Space Station. Endeavour will also carry the Multi-Purpose Logistics Module Leonardo holding supplies and equipment, including additional crew quarters, equipment for the regenerative life support system and spare hardware. Endeavour is targeted for launch on Nov. 14. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd3287

KENNEDY SPACE CENTER, FLA. -- Using an overhead crane, workers move the ground support equipment that will be used to lift the Japanese Experiment Module (JEM) remote manipulator system after it is uncrated. The Japanese Aerospace Exploration Agency developed the laboratory known as "Kibo" (Hope) and includes an exposed facility (platform) for space environment experiments, the RMS and two logistics modules. Japan's primary contribution to the International Space Station, it will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments. The various JEM components will be assembled in space over the course of three Shuttle missions. The JEM and RMS are scheduled to launch on mission STS-124 no earlier than February 2008. Photo credit: NASA/Dimitri Gerondidakis KSC-07pd0105

code Related

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2350

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2355

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2349

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2356

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2354

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2351

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2347

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2352

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2357

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE 2010-2348

description

Summary

STS-132 MINI RESEARCH MODULE-1 CARGO STORAGE

Public domain photograph of a spacecraft, space exploration, free to use, no copyright restrictions image - Picryl description

label_outline

Tags

kennedy space center sts mini research module mini research module cargo storage cargo storage high resolution nasa
date_range

Date

18/03/2010
place

Location

Kennedy Space Center / Cape Canaveral Air Force Station Fire Station 2 ,  28.52650, -80.67093
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Cargo Storage, Mini Research Module, Mini

SpaceX Dragon Cargo Transfer. NASA public domain image colelction.

S124E007988 - STS-124 - Stowage in ISS module

Office of Research and Development - 2010 People, Prosperity and the Planet (P3) [412-APD-942-2010-04-26_1P3Exhibits_1056.jpg]

STS092-366-001 - STS-092 - N14B Y-Cable Jumper in Node 1/Unity module

The flight helmet of one of the pilots participating in exercise COPE THUNDER 89-5 is kept in a Life Support Section storage space during exercise

Office of Research and Development - People, Prosperity and the Planet (P3)_EPA at 40 [412-APD-938-2010-04-26_1P3Exhibits_1102.jpg]

[Assignment: 48-DPA-10-21-08_SOI_K_Yuma] Visit of Secretary Dirk Kempthorne to the [Arizona-California border area,] where he toured the Bureau of Reclamation's Yuma, Arizona [Area Office-Yuma Desalting Plant with Bureau Commissioner Robert Johnson, and joined Johnson and officials from the Southern Nevada Water Authority, Central Arizona Project, and Metropolitan Water District of Southern California at groundbreaking ceremonies for the Drop 2 Reservoir Project--part of the Lower Colorado River Water Storage Program--in Imperial County, California] [48-DPA-10-21-08_SOI_K_Yuma_IOD_6619.JPG]

S134E005162 - STS-134 - Cube Lab Module - 8

S135E011115 - STS-135 - Flyaround View of the MRM1

Watertown Arsenal, Building No. 100, Wooley Avenue, Watertown, Middlesex County, MA

FUELS RESEARCH PROGRAM BROCHURE, NASA Technology Images

ENGINE RESEARCH BUILDING ERB 8X11 TEST CELL SE-6 AND TEST CELL SE-4 CONTROL ROOM

Topics

kennedy space center sts mini research module mini research module cargo storage cargo storage high resolution nasa