air

changes

kennedy space center

load

nasa

protuberance

ramps

safety

safety changes

protuberance air load ramps

82 media by topic ∙ page 1 of 1
KENNEDY SPACE CENTER, FLA. - External tank No. 123 is being transported from the Pegasus barge in the turn basin at the Launch Complex 39 Area to the Vehicle Assembly Building where it will be lifted into a checkout cell for further work. The tank, shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2178

KENNEDY SPACE CENTER, FLA. - External tank No. 123 is being transpor...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 is being transported from the Pegasus barge in the turn basin at the Launch Complex 39 Area to the Vehicle Assembly Building where it will be lifted into a c... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn toward the Vehicle Assembly Building after being offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New Orleans, the tank has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2180

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn to...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn toward the Vehicle Assembly Building after being offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Once insid... More

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. A tugboat will continue the journey upriver to the Turn Basin where, after off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Jack Pfaller KSC-06pd1013

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasu...

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The b... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge passes under the Roy D. Bridges Bridge in the Banana River, as it nears the end of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0405

KENNEDY SPACE CENTER, FLA. - The Pegasus barge passes under the Roy D...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge passes under the Roy D. Bridges Bridge in the Banana River, as it nears the end of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space ... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to finish the trip to the turn basin near NASA Kennedy Space Center's Vehicle Assembly Building. The barge carries the redesigned external fuel tank that will launch the Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from one of the ramps came off during the July 2005 launch of the last shuttle mission. The ramps were removed to help eliminate a potential source of damaging debris to the space shuttle. Launch of Discovery is scheduled for May 2006. Photo credit: NASA/Cory Huston KSC-06pd0382

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid r...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to fini... More

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0402

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge ...

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge ca... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to finish the trip to the turn basin near NASA Kennedy Space Center's Vehicle Assembly Building. The barge carries the redesigned external fuel tank that will launch the Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from one of the ramps came off during the July 2005 launch of the last shuttle mission. The ramps were removed to help eliminate a potential source of damaging debris to the space shuttle. Launch of Discovery is scheduled for May 2006. Photo credit: NASA/Cory Huston KSC-06pd0380

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid r...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to fini... More

KENNEDY SPACE CENTER, FLA. - A tow vehicle is connected to the transporter supporting the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. The Pegasus barge delivered the tank from the Michoud Assembly Facility in New Orleans to NASA Kennedy Space Center's Launch Complex 39 turn basin. After off-loading, the tank will be moved to the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0410

KENNEDY SPACE CENTER, FLA. - A tow vehicle is connected to the transp...

KENNEDY SPACE CENTER, FLA. - A tow vehicle is connected to the transporter supporting the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. The Pegasu... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is docked in the turn basin close by the Vehicle Assembly Building. The barge delivered the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0408

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is docked in the turn ...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is docked in the turn basin close by the Vehicle Assembly Building. The barge delivered the redesigned external fuel tank that will launch Space Shuttle Discovery... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, is towed from the Launch Complex 39 turn basin to the Vehicle Assembly Building. The Pegasus barge delivered the tank from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. After the tank is moved into the VAB, it will be lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0411

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that w...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, is towed from the Launch Complex 39 turn basin to the Vehicle Assem... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge makes its way through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0403

KENNEDY SPACE CENTER, FLA. - The Pegasus barge makes its way through ...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge makes its way through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries th... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star, approaches Port Canaveral. The barge carries the redesigned external fuel tank that will launch the Space Shuttle Discovery on the next shuttle mission, STS-121. It left the Michoud Assembly Facility in New Orleans Feb. 25, making the voyage around the Florida Peninsula in five days. Next stop for the barge is the turn basin near NASA Kennedy Space Center's Vehicle Assembly Building. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from one of the ramps came off during the July 2005 launch of the last shuttle mission. The ramps were removed to help eliminate a potential source of damaging debris to the space shuttle. Launch of Discovery is scheduled for May 2006. Photo credit: NASA/Cory Huston KSC-06pd0378

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid ro...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star, approaches Port Canaveral. The barge carries the redesigned external fuel tank that will launch t... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge traverses the locks at Port Canaveral, as it nears the end of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0404

KENNEDY SPACE CENTER, FLA. - The Pegasus barge traverses the locks at...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge traverses the locks at Port Canaveral, as it nears the end of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge ca... More

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge to the entrance of Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0400

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge ...

KENNEDY SPACE CENTER, FLA. - The Freedom Star tows the Pegasus barge to the entrance of Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. T... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to finish the trip to the turn basin near NASA Kennedy Space Center's Vehicle Assembly Building. The barge carries the redesigned external fuel tank that will launch the Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from one of the ramps came off during the July 2005 launch of the last shuttle mission. The ramps were removed to help eliminate a potential source of damaging debris to the space shuttle. Launch of Discovery is scheduled for May 2006. Photo credit: NASA/Cory Huston KSC-06pd0381

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid r...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star to Port Canaveral from the Michoud Assembly Facility in New Orleans, waits for a tug boat to fini... More

KENNEDY SPACE CENTER, FLA. - Towed by the Freedom Star, the Pegasus barge enters Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0401

KENNEDY SPACE CENTER, FLA. - Towed by the Freedom Star, the Pegasus b...

KENNEDY SPACE CENTER, FLA. - Towed by the Freedom Star, the Pegasus barge enters Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barg... More

KENNEDY SPACE CENTER, FLA. - Towed by the solid rocket booster retrieval ship Freedom Star, the Pegasus barge approaches the dock in the turn basin near the Vehicle Assembly Building. The barge is on the last leg of its journey from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0407

KENNEDY SPACE CENTER, FLA. - Towed by the solid rocket booster retrie...

KENNEDY SPACE CENTER, FLA. - Towed by the solid rocket booster retrieval ship Freedom Star, the Pegasus barge approaches the dock in the turn basin near the Vehicle Assembly Building. The barge is on the last ... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, arrives safely in the transfer aisle of the Vehicle Assembly Building. The Pegasus barge delivered the tank from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. Next, the tank will be lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0413

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that w...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, arrives safely in the transfer aisle of the Vehicle Assembly Buildi... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star, approaches Port Canaveral. The barge carries the redesigned external fuel tank that will launch the Space Shuttle Discovery on the next shuttle mission, STS-121. It left the Michoud Assembly Facility in New Orleans Feb. 25, making the voyage around the Florida Peninsula in five days. Next stop for the barge is the turn basin near NASA Kennedy Space Center's Vehicle Assembly Building. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from one of the ramps came off during the July 2005 launch of the last shuttle mission. The ramps were removed to help eliminate a potential source of damaging debris to the space shuttle. Launch of Discovery is scheduled for May 2006. Photo credit: NASA/Cory Huston KSC-06pd0379

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid ro...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge, towed by the solid rocket booster retrieval ship Freedom Star, approaches Port Canaveral. The barge carries the redesigned external fuel tank that will launch t... More

KENNEDY SPACE CENTER, FLA. - Technicians monitor the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, as it is moved to the Vehicle Assembly Building in the background. The Pegasus barge delivered the tank from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. Once in the VAB, the tank will be lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0412

KENNEDY SPACE CENTER, FLA. - Technicians monitor the redesigned exter...

KENNEDY SPACE CENTER, FLA. - Technicians monitor the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, as it is moved to the Vehicle Assembly Building... More

KENNEDY SPACE CENTER, FLA. - One of the two space shuttle launch pads in Launch Complex 39 is visible behind the Pegasus barge as it traverses the turn basin near the Vehicle Assembly Building. The barge is on the last leg of its journey from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0406

KENNEDY SPACE CENTER, FLA. - One of the two space shuttle launch pads...

KENNEDY SPACE CENTER, FLA. - One of the two space shuttle launch pads in Launch Complex 39 is visible behind the Pegasus barge as it traverses the turn basin near the Vehicle Assembly Building. The barge is on... More

KENNEDY SPACE CENTER, FLA. - Off-loading of the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, begins in the Launch Complex 39 turn basin. The Pegasus barge delivered the tank from the Michoud Assembly Facility in New Orleans to NASA's Kennedy Space Center. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-119, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. KSC-06pd0409

KENNEDY SPACE CENTER, FLA. - Off-loading of the redesigned external f...

KENNEDY SPACE CENTER, FLA. - Off-loading of the redesigned external fuel tank that will launch Space Shuttle Discovery on the next shuttle mission, STS-121, begins in the Launch Complex 39 turn basin. The Pega... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to vertical and then will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0420

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle ...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers are attaching a crane to the newly delivered external tank, which is resting on a transporter in the transfer aisle. Designated ET-119, the 154-foot tank will be raised to vertical and lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0417

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle ...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers are attaching a crane to the newly delivered external tank, which is resting on a transporter in the transfer ais... More

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is suspended vertically just above the floor. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0422

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA Kennedy S...

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is suspended vertically just above the floor. Designated ET-119,... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, a crane has been attached to the newly delivered external tank, which is resting on a transporter in the transfer aisle. Designated ET-119, the 154-foot tank will be raised to vertical and lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0418a

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle As...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, a crane has been attached to the newly delivered external tank, which is resting on a transporter in the transfer aisle. De... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers are attaching a crane to the newly delivered external tank, which is resting on a transporter in the transfer aisle. Designated ET-119, the 154-foot tank will be raised to vertical and lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0418

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle ...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers are attaching a crane to the newly delivered external tank, which is resting on a transporter in the transfer ais... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank has been raised nearly to vertical. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0421

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle ...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank has been raised nearly to vertical. Designated ET-119, the 154-foot tank will be lifte... More

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lowered toward a checkout cell for further work. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0427

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Sp...

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lowered toward a checkout cell for further work. Designated ET-... More

KENNEDY SPACE CENTER, FLA. - In the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is moved over a crossbeam toward a checkout cell for further work. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0426

KENNEDY SPACE CENTER, FLA. - In the upper regions of NASA Kennedy Spac...

KENNEDY SPACE CENTER, FLA. - In the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is moved over a crossbeam toward a checkout cell for further work. ... More

KENNEDY SPACE CENTER, FLA. - In In the transfer aisle of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is suspended vertically just above the floor. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0423

KENNEDY SPACE CENTER, FLA. - In In the transfer aisle of NASA Kenned...

KENNEDY SPACE CENTER, FLA. - In In the transfer aisle of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is suspended vertically just above the floor. Designated ET-1... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers attach another crane to the newly delivered external tank in order to lift it up vertically and over a crossbeam into a checkout cell for further work. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0424

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle A...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, workers attach another crane to the newly delivered external tank in order to lift it up vertically and over a crossbeam i... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to vertical and then will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0419

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle ...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to vertical and then will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0419a

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle As...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted off its transporter. Designated ET-119, the 154-foot tank is being raised to ve... More

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted high into the upper regions. It will be moved over a crossbeam into a checkout cell for further work. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0425

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle As...

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lifted high into the upper regions. It will be moved over a crossbeam into a checkout... More

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lowered into a checkout cell for further work. Designated ET-119, the 154-foot tank will be lifted into a checkout cell for further work. The tank, which will launch space shuttle Discovery on mission STS-121, will fly with many major safety changes, including the removal of the protuberance air load ramps. A large piece of foam from a ramp came off during the last shuttle launch in July 2005. The ramps were removed to eliminate a potential source of damaging debris to the space shuttle. The next launch of Discovery is scheduled for May 2006. Photo credit: NASA/Jim Grossmann KSC-06pd0428

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Sp...

KENNEDY SPACE CENTER, FLA. - From the upper regions of NASA Kennedy Space Center's Vehicle Assembly Building, the newly delivered external tank is lowered into a checkout cell for further work. Designated ET-11... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls toward the open door of the Vehicle Assembly Building. Inside, it will be lifted into a checkout cell for further work . The tank arrived at KSC aboard the Pegasus barge after a journey from the Michoud Assembly Facility in New Orleans. ET-118, which will fly with many major safety changes, including the removal of the protuberance air load ramps, will launch Space Shuttle Atlantis on the next space shuttle mission, STS-115. Photo credit: NASA/Kim Shiflett KSC-06pd1025

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, desi...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls toward the open door of the Vehicle Assembly Building. Inside, it will be lifted into a checkout cell for further work... More

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge next to the dock in the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, seen inside, that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. The tank, designated ET-118, was shipped from the Michoud Assembly Facility in New Orleans. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1019

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge ...

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge next to the dock in the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, seen inside, that will... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls into the open door of the Vehicle Assembly Building. Inside, it will be lifted into a checkout cell for further work . The tank arrived at KSC aboard the Pegasus barge after a journey from the Michoud Assembly Facility in New Orleans. ET-118, which will fly with many major safety changes, including the removal of the protuberance air load ramps, will launch Space Shuttle Atlantis on the next space shuttle mission, STS-115. Photo credit: NASA/Kim Shiflett KSC-06pd1026

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, des...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls into the open door of the Vehicle Assembly Building. Inside, it will be lifted into a checkout cell for further work ... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, turns the corner toward the Vehicle Assembly Building, seen at right. The tank, which arrived at KSC aboard the Pegasus barge after a journey from the Michoud Assembly Facility in New Orleans, will be moved into the VAB and lifted into a checkout cell for further work. ET-118, which will fly with many major safety changes, including the removal of the protuberance air load ramps, will launch Space Shuttle Atlantis on the next space shuttle mission, STS-115. Photo credit: NASA/Kim Shiflett KSC-06pd1024

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, des...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, turns the corner toward the Vehicle Assembly Building, seen at right. The tank, which arrived at KSC aboard the Pegasus bar... More

KENNEDY SPACE CENTER, FLA. - The Liberty Star tows the Pegasus barge to Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. A tugboat will continue the journey upriver to the Turn Basin where, after off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Jack Pfaller KSC-06pd1015

KENNEDY SPACE CENTER, FLA. - The Liberty Star tows the Pegasus barge ...

KENNEDY SPACE CENTER, FLA. - The Liberty Star tows the Pegasus barge to Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries ... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on mission, STS-115 begins moving out of the Pegasus barge that carried it from the Michoud Assembly Facility in New Orleans. The tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. It will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1021

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, des...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on mission, STS-115 begins moving out of the Pegasus barge that carried it from the ... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, is transported on the road toward the Vehicle Assembly Building, seen at right. The tank, which arrived at KSC aboard the Pegasus barge after a journey from the Michoud Assembly Facility in New Orleans, will be moved into the VAB and lifted into a checkout cell for further work. ET-118, which will fly with many major safety changes, including the removal of the protuberance air load ramps, will launch Space Shuttle Atlantis on the next space shuttle mission, STS-115. Photo credit: NASA/Kim Shiflett KSC-06pd1023

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, desi...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, is transported on the road toward the Vehicle Assembly Building, seen at right. The tank, which arrived at KSC aboard the Pe... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls into the transfer aisle of the Vehicle Assembly Building where will be lifted into a checkout cell for further work . The tank arrived at KSC aboard the Pegasus barge after a journey from the Michoud Assembly Facility in New Orleans. ET-118, which will fly with many major safety changes, including the removal of the protuberance air load ramps, will launch Space Shuttle Atlantis on the next space shuttle mission, STS-115. Photo credit: NASA/Kim Shiflett KSC-06pd1027

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, des...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, rolls into the transfer aisle of the Vehicle Assembly Building where will be lifted into a checkout cell for further work .... More

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. A tugboat will continue the journey upriver to the Turn Basin where, after off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Jack Pfaller KSC-06pd1012

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasu...

KENNEDY SPACE CENTER, FLA. - The Liberty Star (left) tows the Pegasus barge through Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The b... More

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on mission STS-115 is offloaded from the Pegasus barge that carried it from the Michoud Assembly Facility in New Orleans. The tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. It will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1022

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, de...

KENNEDY SPACE CENTER, FLA. - The redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on mission STS-115 is offloaded from the Pegasus barge that carried it from the Mic... More

KENNEDY SPACE CENTER, FLA. - Viewed from the NASA News Center, a tug boat in the background maneuvers the Pegasus barge into the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. The tank was shipped from the Michoud Assembly Facility in New Orleans. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1016

KENNEDY SPACE CENTER, FLA. - Viewed from the NASA News Center, a tug...

KENNEDY SPACE CENTER, FLA. - Viewed from the NASA News Center, a tug boat in the background maneuvers the Pegasus barge into the turn basin at the Launch Complex 39 Area. The barge holds the redesigned exte... More

KENNEDY SPACE CENTER, FLA. - A Great Blue Heron on the near bank has a front row perch for the arrival of the Pegasus barge being towed into the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. The tank was shipped from the Michoud Assembly Facility in New Orleans. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1017

KENNEDY SPACE CENTER, FLA. - A Great Blue Heron on the near bank has...

KENNEDY SPACE CENTER, FLA. - A Great Blue Heron on the near bank has a front row perch for the arrival of the Pegasus barge being towed into the turn basin at the Launch Complex 39 Area. The barge holds the... More

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge next to the dock in the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, designated ET-118, that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. The tank was shipped from the Michoud Assembly Facility in New Orleans. After off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Kim Shiflett KSC-06pd1018

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge n...

KENNEDY SPACE CENTER, FLA. - Tug boats maneuver the Pegasus barge next to the dock in the turn basin at the Launch Complex 39 Area. The barge holds the redesigned external fuel tank, designated ET-118, tha... More

KENNEDY SPACE CENTER, FLA. - With the help of tug boats, the Liberty Star (left) tows the Pegasus barge toward Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to Kennedy Space Center. The barge carries the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115. The tugboats will continue the journey upriver to the Turn Basin where, after off-loading, the tank will be moved into the Vehicle Assembly Building and lifted into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/Jack Pfaller KSC-06pd1014

KENNEDY SPACE CENTER, FLA. - With the help of tug boats, the Liberty...

KENNEDY SPACE CENTER, FLA. - With the help of tug boats, the Liberty Star (left) tows the Pegasus barge toward Port Canaveral, the last leg of its journey from the Michoud Assembly Facility in New Orleans to ... More

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is prepared to be raised to a vertical position. Once it is raised, the tank will be moved into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1028

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicl...

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is prep... More

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the suspended external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is moved toward the checkout cell where it will undergo further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1035

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the ...

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the suspended external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is moved toward the checkout cell... More

KENNEDY SPACE CENTER, FLA. - Seen from an upper level of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lifted for transfer into a checkout cell for further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1033

KENNEDY SPACE CENTER, FLA. - Seen from an upper level of NASA's Vehi...

KENNEDY SPACE CENTER, FLA. - Seen from an upper level of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is li... More

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lifted toward the upper levels for transfer into a checkout cell for further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1034

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, th...

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lifted toward the upper lev... More

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is raised to a vertical position. The tank will next be moved into a checkout cell for further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1031

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicl...

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is rais... More

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lifted off its transporter and will be raised to a vertical position. Once it is raised, the tank will be moved into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1029

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicl...

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lift... More

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is suspended above the transfer aisle where it will be raised to a vertical position. Once it is raised, the tank will be moved into a checkout cell for further work. The tank, designated ET-118, will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1030

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, t...

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is suspended above the transf... More

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the suspended external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is moved into a checkout cell where it will undergo further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1036

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the ...

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the suspended external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is moved into a checkout cell whe... More

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is ready to be lifted into the upper levels for transfer into a checkout cell for further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1032

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehic...

KENNEDY SPACE CENTER, FLA. - In the transfer aisle of NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is rea... More

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lowered into the checkout cell where it will undergo further work. Designated ET-118, the tank will fly with many major safety changes, including the removal of the protuberance air load ramps. Photo credit: NASA/George Shelton KSC-06pd1037

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the...

KENNEDY SPACE CENTER, FLA. - In NASA's Vehicle Assembly Building, the redesigned external fuel tank that will launch Space Shuttle Atlantis on the next shuttle mission, STS-115, is lowered into the checkout ce... More

KENNEDY SPACE CENTER, FLA. - A worker in the Vehicle Assembly Building attaches a crane to external tank No. 118 in order to raise it vertical and lift it into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1509

KENNEDY SPACE CENTER, FLA. - A worker in the Vehicle Assembly Buildi...

KENNEDY SPACE CENTER, FLA. - A worker in the Vehicle Assembly Building attaches a crane to external tank No. 118 in order to raise it vertical and lift it into high bay 3 for mating with solid rocket boosters... More

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is lifted off its transporter before being raised to vertical and into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1510

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, exter...

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is lifted off its transporter before being raised to vertical and into high bay 3 for mating with solid rocket boosters sta... More

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is suspended vertically above the transfer aisle. The tank will be lifted into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1514

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, extern...

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is suspended vertically above the transfer aisle. The tank will be lifted into high bay 3 for mating with solid rocket boos... More

KENNEDY SPACE CENTER, FLA. - Workers in the Vehicle Assembly Building attach a crane to external tank No. 118 in order to raise it vertical and lift it into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1508

KENNEDY SPACE CENTER, FLA. - Workers in the Vehicle Assembly Buildin...

KENNEDY SPACE CENTER, FLA. - Workers in the Vehicle Assembly Building attach a crane to external tank No. 118 in order to raise it vertical and lift it into high bay 3 for mating with solid rocket boosters st... More

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is suspended vertically above the transfer aisle. The tank will be lifted into high bay 3for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1515

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, extern...

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is suspended vertically above the transfer aisle. The tank will be lifted into high bay 3for mating with solid rocket boost... More

KENNEDY SPACE CENTER, FLA. - External tank No. 118 waits in the Vehicle Assembly Building for a crane to be attached that will raise it to vertical and lifted into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1507

KENNEDY SPACE CENTER, FLA. - External tank No. 118 waits in the Vehi...

KENNEDY SPACE CENTER, FLA. - External tank No. 118 waits in the Vehicle Assembly Building for a crane to be attached that will raise it to vertical and lifted into high bay 3 for mating with solid rocket boos... More

KENNEDY SPACE CENTER, FLA. - External tank No. 118 is suspended over the transfer aisle of the Vehicle Assembly Building before being raised to vertical and into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1512

KENNEDY SPACE CENTER, FLA. - External tank No. 118 is suspended over...

KENNEDY SPACE CENTER, FLA. - External tank No. 118 is suspended over the transfer aisle of the Vehicle Assembly Building before being raised to vertical and into high bay 3 for mating with solid rocket booste... More

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is lifted off its transporter before being raised to vertical and into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1511

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, exter...

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, external tank No. 118 is lifted off its transporter before being raised to vertical and into high bay 3 for mating with solid rocket boosters sta... More

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, a crane begins raising the head of external tank No. 118 so that the tank is suspended vertically. The tank will be lifted into high bay 3 for mating with solid rocket boosters stacked there. The tank is designated to fly on mission STS-115 with Atlantis. It will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1513

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, a cr...

KENNEDY SPACE CENTER, FLA. - In the Vehicle Assembly Building, a crane begins raising the head of external tank No. 118 so that the tank is suspended vertically. The tank will be lifted into high bay 3 for ... More

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, external tank No. 118 has been lowered between the twin solid rocket boosters on the mobile launcher platform. The stack is designated to fly on mission STS-115 with Atlantis. ET-118 will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1517

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Bu...

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, external tank No. 118 has been lowered between the twin solid rocket boosters on the mobile launcher platform. The stack is designat... More

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, external tank No. 118 is lowered between the twin solid rocket boosters on the mobile launcher platform. The stack is designated to fly on mission STS-115 with Atlantis. ET-118 will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1516

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Bu...

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, external tank No. 118 is lowered between the twin solid rocket boosters on the mobile launcher platform. The stack is designated to... More

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, a United Space Alliance worker attaches external tank No. 118 to one of the solid rocket boosters on the mobile launcher platform. The stack is designated to fly on mission STS-115 with Atlantis. ET-118 will fly with many major safety changes, including the removal of the protuberance air load ramps. The mission will deliver the second port truss segment, the P3/P4 Truss, to attach to the first port truss segment, the P1 Truss, as well as deploy solar array set 2A and 4A. Launch of Space Shuttle Atlantis is scheduled for late August. Photo credit: NASA/Jim Grossmann KSC-06pd1518

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Bu...

KENNEDY SPACE CENTER, FLA. - In high bay 3 of the Vehicle Assembly Building, a United Space Alliance worker attaches external tank No. 118 to one of the solid rocket boosters on the mobile launcher platform. ... More

KENNEDY SPACE CENTER, FLA. - Tow boats secure the Pegasus barge at the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. At left is the 525-foot-high Vehicle Assembly Building where the external tank will go after offloading from the barge. The tank, which was shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/George Shelton KSC-06pd2175

KENNEDY SPACE CENTER, FLA. - Tow boats secure the Pegasus barge at t...

KENNEDY SPACE CENTER, FLA. - Tow boats secure the Pegasus barge at the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated... More

KENNEDY SPACE CENTER, FLA. - Inside the Pegasus barge can be seen external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. Now docked at the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center, the barge was towed from NASA's Michoud Assembly Facility in New Orleans. The tank has undergone major safety changes, including removal of the protuberance air load ramps. The tank will be offloaded and transported to the Vehicle Assembly Building. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/George Shelton KSC-06pd2176

KENNEDY SPACE CENTER, FLA. - Inside the Pegasus barge can be seen ex...

KENNEDY SPACE CENTER, FLA. - Inside the Pegasus barge can be seen external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. Now docked at the turn basin dock in the ... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge approaches the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. At left is the 525-foot-high Vehicle Assembly Building where the external tank will go after offloading from the barge. The tank, which was shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/George Shelton KSC-06pd2174

KENNEDY SPACE CENTER, FLA. - The Pegasus barge approaches the turn b...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge approaches the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to launc... More

KENNEDY SPACE CENTER, FLA. - One of the boats towing the Pegasus barge moves beside it to help with docking at the turn basin in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. The tank, which was shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/George Shelton KSC-06pd2173

KENNEDY SPACE CENTER, FLA. - One of the boats towing the Pegasus bar...

KENNEDY SPACE CENTER, FLA. - One of the boats towing the Pegasus barge moves beside it to help with docking at the turn basin in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge i... More

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is towed toward the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to launch Space Shuttle Discovery on mission STS-116 in December. The tank, which was shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/George Shelton KSC-06pd2172

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is towed toward the t...

KENNEDY SPACE CENTER, FLA. - The Pegasus barge is towed toward the turn basin dock in the Launch Complex 39 Area at NASA's Kennedy Space Center. Onboard the barge is the external tank No. 123, designated to ... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn toward the Vehicle Assembly Building after being offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New Orleans, the tank has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2179

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn to...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 makes the turn toward the Vehicle Assembly Building after being offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Once insid... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 moves into the Vehicle Assembly Building where it will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New Orleans aboard the Pegasus barge, the tank has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2183

KENNEDY SPACE CENTER, FLA. - External tank No. 123 moves into the Veh...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 moves into the Vehicle Assembly Building where it will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New ... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads toward the open doorway of the Vehicle Assembly Building. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New Orleans aboard the Pegasus barge, the tank has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2181

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads toward the ...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads toward the open doorway of the Vehicle Assembly Building. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped ... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 is offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Designated to launch Space Shuttle Discovery on mission STS-116 in December, the tank is being moved to the Vehicle Assembly Building where it will be lifted into a checkout cell for further work. The tank, which was shipped from NASA's Michoud Assembly Facility in New Orleans, has undergone major safety changes, including removal of the protuberance air load ramps. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2177

KENNEDY SPACE CENTER, FLA. - External tank No. 123 is offloaded from...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 is offloaded from the Pegasus barge in the turn basin at the Launch Complex 39 Area. Designated to launch Space Shuttle Discovery on mission STS-116 in Dece... More

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads into the open doorway of the Vehicle Assembly Building. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped from NASA's Michoud Assembly Facility in New Orleans aboard the Pegasus barge, the tank has undergone major safety changes, including removal of the protuberance air load ramps. It is designated to launch Space Shuttle Discovery on mission STS-116 in December. Mission STS-116 will deliver the P5 truss segment, a SPACEHAB module and other key components to the International Space Station. Launch is currently scheduled no earlier than Dec. 14. Photo credit: NASA/Jack Pfaller KSC-06pd2182

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads into the ope...

KENNEDY SPACE CENTER, FLA. - External tank No. 123 heads into the open doorway of the Vehicle Assembly Building. Once inside the VAB, the tank will be lifted into a checkout cell for further work. Shipped fro... More