nasa

titan

kennedy space center

saturn

spacecraft

jpl

jet propulsion laboratory

cape canaveral

cassini spacecraft

cassini

289 media by topic ∙ page 1 of 3
Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain scan of art print, portrait, Italy, free to use, no copyright restrictions image - Picryl description.

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain photo of portrait art print, 18th century, free to use, no copyright restrictions image - Picryl description.

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain image of 18th-century portrait, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain image of 17th century portrait, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain reproduction of portrait art print, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain scan of art print, portrait, Italy, free to use, no copyright restrictions image - Picryl description.

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain scan of art print, portrait, Italy, free to use, no copyright restrictions image - Picryl description.

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Public domain photograph of portrait print, engraving, book illustration, 16th-17th century, free to use, no copyright restrictions image - Picryl description

Cassini de Thury, César Francois

Cassini de Thury, César Francois

Public domain image of 18th-century portrait, free to use, no copyright restrictions image - Picryl description

Cassini, Jean Dominique Comte de

Cassini, Jean Dominique Comte de

Public domain photo of man portrait art print, free to use, no copyright restrictions image - Picryl description

Cassini, Jean Dominique Comte de

Cassini, Jean Dominique Comte de

Public domain scan of portrait art print, free to use, no copyright restrictions image - Picryl description

Cassini, Alexandre Henri Gabriel Vicomte

Cassini, Alexandre Henri Gabriel Vicomte

Public domain photo of man portrait art print, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Stecher: Cossin, Louis Verleger: Drevet, Pierre (1663) Datierung: 1678 / 1704 Public domain scan of Italian 17th-century print, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Stecher: Westermayr, Konrad (1765) Public domain scan of Italian 17th-century print, free to use, no copyright restrictions image - Picryl description

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Verleger: Odieuvre, Michel Maler: Beaubrun, Henri (der Jüngere) Maler: Beaubrun, Charles Stecher: Dupuis, Nicolas Gabriel Verlagsort: Paris

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

Verleger: Odieuvre, Michel Maler: Beaubrun, Henri (der Jüngere) Maler: Beaubrun, Charles Stecher: Dupuis, Nicolas Gabriel Verlagsort: Paris

Cassini, Giovanni Domenico - Public domain portrait engraving

Cassini, Giovanni Domenico - Public domain portrait engraving

unbekannter Künstler Public domain scan of Italian 17th-century print, free to use, no copyright restrictions image - Picryl description

Portrait of Countess Cassini, Washington DC

Portrait of Countess Cassini, Washington DC

Ca. 1900

Marguerite Cassini, 1882-, Frances Benjamin Johnston collection

Marguerite Cassini, 1882-, Frances Benjamin Johnston collection

Daughter of Russian Ambassador to U.S., full-length portrait, standing in jewelled gown, holding sword, facing left. Title and other information transcribed from caption card and item. Frances Benjamin Johnston... More

Tarred and feathered Count Igor Cassini, (above) Washington newspaper columnist, was reported by Sheriff W.S. Wolfe to have been tarred and feathered near Warrenton, Virginia, June 25. Hospital attendants said Cassini entered the institution covered with tar and feathers from head to foot but that minor brush burns were his only physical injuries. (Picture from files).

Tarred and feathered Count Igor Cassini, (above) Washington newspaper ...

Photograph shows head-and-shoulders portrait of Cassini. Public domain photograph - Portrait, United States, free to use, no copyright restrictions image - Picryl description

Range : 106,250,000 km. ( 66 million miles) P-22830C This, Voyager 1 image shows Saturn and three of its satellites. A series of dark and light cloud bands appears through high altitude haze in the northern hemisphere. Cosiderable structure can be seen in the rings. The Cassini division, between the A-ring and B-ring, is readily visible. The shadow of rings on the planet's disk can also be seeen. The three satellites visible are, left to right, Enceladus (off the left edge of rings), Dione (just below the planet), and Tethys (at right edge of frame). The spacecraft will make its closest approach, 124,200 km. (77,174 miles) abovr the cloud tops, at 3:45 pm PST on Nov. 12, 1980. Nine months later, in August 1981, Voyager 2 will encounter Saturn and then continue on to Uranus. ARC-1980-AC80-7000

Range : 106,250,000 km. ( 66 million miles) P-22830C This, Voyager 1 ...

Range : 106,250,000 km. ( 66 million miles) P-22830C This, Voyager 1 image shows Saturn and three of its satellites. A series of dark and light cloud bands appears through high altitude haze in the northern he... More

Range : 34 million km. ( 21.1 million miles) P-22993C This Voyager 1 photograph of Saturn was taken on the last day it could be captured within a single narrow angle camera frame as the spacecraft neared the planet for it's closest approach on Nov. 12, 1980. Dione, one of Saturn's innermost satellites, appears as three color spots just below the planet's south pole. An abundance of previously unseen detail is apparent in the rings. For example, a gap in the dark, innermst ring, C-ring or Crepe Ring, is clearly shown. Also, material is seen inside the relatively wide Cassini Division, seperating the middle, B-ring from the outermost ring, the A-ring. The Encke division is shown near the outer edge of A-ring. The detail in the ring's shadows cast on the planet is of particular interest. The broad dark band near the equator is the shadow of B-ring. The thinner, brighter line just to the south is the shadow of the less dense A-ring. ARC-1980-AC80-7003

Range : 34 million km. ( 21.1 million miles) P-22993C This Voyager 1 ...

Range : 34 million km. ( 21.1 million miles) P-22993C This Voyager 1 photograph of Saturn was taken on the last day it could be captured within a single narrow angle camera frame as the spacecraft neared the p... More

Cassini Mission Artwork: Saturn Orbitor and Titan Probe Spacecraft (ref: P-33300) ARC-1988-AC88-0473

Cassini Mission Artwork: Saturn Orbitor and Titan Probe Spacecraft (re...

Cassini Mission Artwork: Saturn Orbitor and Titan Probe Spacecraft (ref: P-33300)

Cassini Saturn Probe Undergoes Preflight Testing

Cassini Saturn Probe Undergoes Preflight Testing

(October 31, 1996) The newly assembled Cassini Saturn probe undergoes vibration and thermal testing at the JPL facilities in Pasadena, California. Subjected to weeks of "shake and bake" tests that imitate the f... More

Preparations for adding Cassini's propulsion module

Preparations for adding Cassini's propulsion module

(July 2, 1997) Jet Propulsion Laboratory (JPL) technicians clean and prepare the upper equipment module for mating with the nuclear propulsion module subsystem of the Cassini orbiter in the Payload Hazardous Se... More

Liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe

Liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its at...

Description: KENNEDY SPACE CENTER, FLA. -- A seven-year journey to the ringed planet Saturn begins with the liftoff of a Titan IVB/Centaur carrying the Cassini orbiter and its attached Huygens probe. This spect... More

Inspecting Cassini's nuclear power source

Inspecting Cassini's nuclear power source

(June 17, 1997) Environmental Health Specialist Jamie A. Keeley of EG&G Florida Inc., KSC's base operations contractor, uses an ion chamber dose rate meter to measure radiation levels in one of the three radioi... More

Repair to the Huygens probe. NASA public domain image colelction.

Repair to the Huygens probe. NASA public domain image colelction.

(September 10, 1997) Jet Propulsion Laboratory (JPL) workers examine the Huygens probe after removal from the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF) at KSC. The spacecraft was ret... More

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is transported from the Skid Strip at Cape Canaveral Air Station (CCAS) after its arrival via a jet cargo aircraft. The Titan IV is currently scheduled to lift off from Launch Pad 40 at CCAS on October 6. Once deployed from the Centaur upper stage, Cassini will conduct gravity-assist flybys of the planets Venus and Jupiter, then arrive at Saturn in July 2004. Once there, it will perform an orbital survey of Saturn and send the European Space Agency's Huygens Probe into the dense and seemingly Earthlike atmosphere of Titan. The Cassini project is managed by NASA's Jet Propulsion Laboratory (JPL), Pasadena, California KSC-97pc247

The Centaur upper stage of the Titan IV expendable launch vehicle that...

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is transported from the Skid Strip at Cape Canaveral Air Station (CCAS) aft... More

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is transported from the Skid Strip at Cape Canaveral Air Station (CCAS) after its arrival via a jet cargo aircraft. The Titan IV is currently scheduled to lift off from Launch Pad 40 at CCAS on October 6. Once deployed from the Centaur upper stage, Cassini will conduct gravity-assist flybys of the planets Venus and Jupiter, then arrive at Saturn in July 2004. Once there, it will perform an orbital survey of Saturn and send the European Space Agency's Huygens Probe into the dense and seemingly Earthlike atmosphere of Titan. The Cassini project is managed by NASA's Jet Propulsion Laboratory (JPL), Pasadena, California KSC-97pc248

The Centaur upper stage of the Titan IV expendable launch vehicle that...

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is transported from the Skid Strip at Cape Canaveral Air Station (CCAS) aft... More

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is unloaded from a jet cargo aircraft at the Skid Strip at Cape Canaveral Air Station (CCAS). The Titan IV is currently scheduled to lift off from Launch Pad 40 at CCAS on October 6. Once deployed from the Centaur upper stage, Cassini will conduct gravity-assist flybys of the planets Venus and Jupiter, then arrive at Saturn in July 2004. Once there, it will perform an orbital survey of Saturn and send the European Space Agency's Huygens Probe into the dense and seemingly Earthlike atmosphere of Titan. The Cassini project is managed by NASA's Jet Propulsion Laboratory (JPL), Pasadena, California KSC-97pc246

The Centaur upper stage of the Titan IV expendable launch vehicle that...

The Centaur upper stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is unloaded from a jet cargo aircraft at the Skid Strip at Cape Canaveral A... More

Workers take off the protective covering on the propulsion module for the Cassini spacecraft after uncrating the module at KSC's Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2). The extended journey of 6.7 years to Saturn and the 4-year mission for Cassini once it gets there will require the spacecraft to carry a large amount of propellant for inflight trajectory-correction maneuvers and attitude control, particularly during the science observations. The propulsion module has redundant 445-newton main engines that burn nitrogen tetraoxide and monomethyl-hydrazine for main propulsion and 16 smaller 1-newton engines that burn hydrazine to control attitude and to correct small deviations from the spacecraft flight path. Cassini will be launched on a Titan IVB/Centaur expendable launch vehicle. Liftoff is targeted for October 6 from Launch Complex 40, Cape Canaveral Air Station KSC-97pc402

Workers take off the protective covering on the propulsion module for ...

Workers take off the protective covering on the propulsion module for the Cassini spacecraft after uncrating the module at KSC's Spacecraft Assembly and Encapsulation Facility-2 (SAEF-2). The extended journey o... More

The Huygens probe, which will study the clouds, atmosphere and surface of Saturn's largest moon, Titan, as part of the Cassini mission to Saturn, is prepared for transport from the Skid Strip, Cape Canaveral Air Station (CCAS), after being off-loaded from a plane. The probe was designed and developed for the European Space Agency (ESA) by a European industrial consortium led by Aerospatiale as prime contractor. Over the past year, it was integrated and tested at the facilities of Daimler Benz Aerospace Dornier Satellitensysteme in Germany. The probe will be mated to the Cassini orbiter, which was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini launch is targeted for October 6 from CCAS aboard a Titan IVB/Centaur expendable launch vehicle. After arrival at Saturn in 2004, the probe will be released from the Cassini orbiter to slowly descend through the Titan atmosphere to the moon's surface KSC-97pc595

The Huygens probe, which will study the clouds, atmosphere and surface...

The Huygens probe, which will study the clouds, atmosphere and surface of Saturn's largest moon, Titan, as part of the Cassini mission to Saturn, is prepared for transport from the Skid Strip, Cape Canaveral Ai... More

The Huygens probe, which will study the clouds, atmosphere and surface of Saturn's moon, Titan, as part of the Cassini mission to Saturn, arrives in a cargo plane at the Skid Strip, Cape Canaveral Air Station (CCAS). The probe was designed and developed for the European Space Agency (ESA) by a European industrial consortium led by Aerospatiale as prime contractor. Over the past year, it was integrated and tested at the facilities of Daimler Benz Aerospace Dornier Satellitensysteme in Germany. The probe will be mated to the Cassini orbiter, which was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini launch is targeted for October 6 from CCAS aboard a Titan IVB/Centaur expendable launch vehicle. After arrival at Saturn in 2004, the probe will be released from the Cassini orbiter to enter the Titan atmosphere KSC-97pc594

The Huygens probe, which will study the clouds, atmosphere and surface...

The Huygens probe, which will study the clouds, atmosphere and surface of Saturn's moon, Titan, as part of the Cassini mission to Saturn, arrives in a cargo plane at the Skid Strip, Cape Canaveral Air Station (... More

Workers in the Payload Hazardous Servicing Facility prepare to begin prelaunch processing of the Huygens probe, which will study the clouds, atmosphere and surface of Saturnþs largest moon, Titan, as part of the Cassini mission to Saturn. The probe was designed and developed for the European Space Agency (ESA) by a European industrial consortium led by Aerospatiale as prime contractor. Over the past year, it was integrated and tested at the facilities of Daimler Benz Aerospace Dornier Satellitensysteme in Germany. The probe will be mated to the Cassini orbiter, which was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini launch is targeted for October 6 from CCAS aboard a Titan IVB/Centaur expendable launch vehicle. After arrival at Saturn in 2004, the probe will be released from the Cassini orbiter to slowly descend through the Titan atmosphere to the moon's surface KSC-97pc610

Workers in the Payload Hazardous Servicing Facility prepare to begin p...

Workers in the Payload Hazardous Servicing Facility prepare to begin prelaunch processing of the Huygens probe, which will study the clouds, atmosphere and surface of Saturnþs largest moon, Titan, as part of th... More

Workers in the Payload Hazardous Servicing Facility prepare to begin prelaunch processing of the Huygens probe, which will study the clouds, atmosphere and surface of Saturn's largest moon, Titan, as part of the Cassini mission to Saturn. The probe was designed and developed for the European Space Agency (ESA) by a European industrial consortium led by Aerospatiale as prime contractor. Over the past year, it was integrated and tested at the facilities of Daimler Benz Aerospace Dornier Satellitensysteme in Germany. The probe will be mated to the Cassini orbiter, which was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini launch is targeted for October 6 from CCAS aboard a Titan IVB/Centaur expendable launch vehicle. After arrival at Saturn in 2004, the probe will be released from the Cassini orbiter to slowly descend through the Titan atmosphere to the moon's surface KSC-97pc609

Workers in the Payload Hazardous Servicing Facility prepare to begin p...

Workers in the Payload Hazardous Servicing Facility prepare to begin prelaunch processing of the Huygens probe, which will study the clouds, atmosphere and surface of Saturn's largest moon, Titan, as part of th... More

The descent module of the Titan-bound Huygens probe undergoes preflight processing on a support structure in the Payload Hazardous Servicing Facility (PHSF). The probe will study the clouds, atmosphere and surface of Saturn's moon, Titan, as part of the Cassini mission to the Saturnian system. The cylinders on the top of the probe contain antennas; the small square box has a parachute. The probe will detach from the Cassini orbiter after arrival at Saturn in 2004 to slowly descend through Titan's atmosphere to the surface of the Saturn moon. The Cassini launch on a Titan IVB/Centaur expendable launch vehicle is scheduled for October 6 from Cape Canaveral Air Station KSC-97pc652

The descent module of the Titan-bound Huygens probe undergoes prefligh...

The descent module of the Titan-bound Huygens probe undergoes preflight processing on a support structure in the Payload Hazardous Servicing Facility (PHSF). The probe will study the clouds, atmosphere and surf... More

The first stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is lowered into a high bay in the Vertical Integration Building at Cape Canaveral Air Station (CCAS) to begin stacking operations. The Titan IV is currently scheduled to lift off from Launch Pad 40 at CCAS on October 6. Once deployed from the Titan's Centaur upper stage, Cassini will conduct gravity-assist flybys of the planets Venus and Jupiter, then arrive at Saturn in July 2004. Once there, it will perform an orbital survey of Saturn and send the European Space Agency's Huygens Probe into the dense and seemingly Earthlike atmosphere of Titan. The Cassini project is managed by NASA's Jet Propulsion Laboratory (JPL), Pasadena, California KSC-97pc640

The first stage of the Titan IV expendable launch vehicle that will pr...

The first stage of the Titan IV expendable launch vehicle that will propel the Cassini spacecraft to Saturn and its moon Titan is lowered into a high bay in the Vertical Integration Building at Cape Canaveral A... More

Lockheed Martin technicians and engineers in the Vertical Integration Building prepare to hoist the second stage of a Titan IV/Centaur expendable launch vehicle into a vertical position where it can lifted and mated to the first stage of the rocket. The Titan IVB rocket is the newest version of America's most powerful unmanned rocket. This rocket will be used for the Cassini mission to Saturn. The Cassini launch is targeted for October 6 from Launch Complex 40, Cape Canaveral Air Station KSC-97pc661

Lockheed Martin technicians and engineers in the Vertical Integration ...

Lockheed Martin technicians and engineers in the Vertical Integration Building prepare to hoist the second stage of a Titan IV/Centaur expendable launch vehicle into a vertical position where it can lifted and ... More

The second stage of a Titan IV/Centaur expendable launch vehicle is suspended in the Vertical Integration Building before being moved into position for mating to the first stage. The Titan IVB rocket is the newest version of America's most powerful unmanned rocket. This rocket will be used for the Cassini mission to Saturn. The Cassini launch is targeted for October 6 from Launch Complex 40, Cape Canaveral Air Station KSC-97pc662

The second stage of a Titan IV/Centaur expendable launch vehicle is su...

The second stage of a Titan IV/Centaur expendable launch vehicle is suspended in the Vertical Integration Building before being moved into position for mating to the first stage. The Titan IVB rocket is the new... More

Workers offload the shipping container with the Cassini orbiter from what looks like a giant shark mouth, but is really an Air Force C-17 air cargo plane which /1997/66-97.htm">just landed</a> at KSC’s Shuttle Landing Facility from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc678

Workers offload the shipping container with the Cassini orbiter from w...

Workers offload the shipping container with the Cassini orbiter from what looks like a giant shark mouth, but is really an Air Force C-17 air cargo plane which kscpao/release/1997/66-97.htm">just landed</a> at ... More

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The /1997/66-97.htm">orbiter arrived</a> at KSC’s Shuttle Landing Facility in a U.S. Air Force C-17 air cargo plane from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc682

Workers prepare to move the shipping container with the Cassini orbite...

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The kscpao/release/1997/66-97.ht... More

Workers prepare to tow away the large container with the Cassini orbiter from KSC’s Shuttle Landing Facility. The orbiter /1997/66-97.htm">just arrived</a> on the U.S. Air Force C-17 air cargo plane, shown here, from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc679

Workers prepare to tow away the large container with the Cassini orbit...

Workers prepare to tow away the large container with the Cassini orbiter from KSC’s Shuttle Landing Facility. The orbiter kscpao/release/1997/66-97.htm">just arrived</a> on the U.S. Air Force C-17 air cargo pla... More

Workers begin unloading the Cassini orbiter from a U.S. Air Force C-17 air cargo plane after its /1997/66-97.htm">arrival</a> at KSC’s Shuttle Landing Facility from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc677

Workers begin unloading the Cassini orbiter from a U.S. Air Force C-17...

Workers begin unloading the Cassini orbiter from a U.S. Air Force C-17 air cargo plane after its kscpao/release/1997/66-97.htm">arrival</a> at KSC’s Shuttle Landing Facility from Edwards Air Force Base, Califor... More

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The /1997/66-97.htm">orbiter arrived</a> at KSC’s Shuttle Landing Facility in a U.S. Air Force C-17 air cargo plane from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc681

Workers prepare to move the shipping container with the Cassini orbite...

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The kscpao/release/1997/66-97.ht... More

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The /1997/66-97.htm">orbiter arrived</a> at KSC’s Shuttle Landing Facility in a U.S. Air Force C-17 air cargo plane from Edwards Air Force Base, California. The orbiter and the Huygens probe already being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc680

Workers prepare to move the shipping container with the Cassini orbite...

Workers prepare to move the shipping container with the Cassini orbiter inside the Payload Hazardous Servicing Facility (PHSF) for prelaunch processing, testing and integration. The kscpao/release/1997/66-97.ht... More

An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the front heat shield of the Huygens probe during prelaunch processing testing and integration in that facility, with the probe’s back cover in the background. The Huygens probe and the Cassini orbiter being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc729

An employee in the Payload Hazardous Servicing Facility (PHSF) sews th...

An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the front heat shield of the Huygens probe during prelaunch processing testing and integration in that facility... More

A worker in the Payload Hazardous Servicing Facility (PHSF) stands behind the bottom side of the experiment platform for the Huygens probe that will accompany the Cassini orbiter to Saturn during prelaunch processing testing and integration in that facility. The Huygens probe and the Cassini orbiter being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc732

A worker in the Payload Hazardous Servicing Facility (PHSF) stands beh...

A worker in the Payload Hazardous Servicing Facility (PHSF) stands behind the bottom side of the experiment platform for the Huygens probe that will accompany the Cassini orbiter to Saturn during prelaunch proc... More

Workers in the Payload Hazardous Servicing Facility (PHSF) stand around the upper experiment module and base of the Cassini orbiter during prelaunch processing, testing and integration in that facility. The Cassini orbiter and Huygens probe being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc731

Workers in the Payload Hazardous Servicing Facility (PHSF) stand aroun...

Workers in the Payload Hazardous Servicing Facility (PHSF) stand around the upper experiment module and base of the Cassini orbiter during prelaunch processing, testing and integration in that facility. The Cas... More

Workers in the Payload Hazardous Servicing Facility (PHSF) perform checkouts of the upper experiment module and base of the Cassini orbiter during prelaunch processing, testing and integration in that facility. The Cassini orbiter and Huygens probe being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc727

Workers in the Payload Hazardous Servicing Facility (PHSF) perform che...

Workers in the Payload Hazardous Servicing Facility (PHSF) perform checkouts of the upper experiment module and base of the Cassini orbiter during prelaunch processing, testing and integration in that facility.... More

Employees in the Payload Hazardous Servicing Facility (PHSF) lower the upper experiment module and base of the Cassini orbiter onto a work stand during prelaunch processing, testing and integration work in that facility. The Cassini orbiter and Huygens probe being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc726

Employees in the Payload Hazardous Servicing Facility (PHSF) lower the...

Employees in the Payload Hazardous Servicing Facility (PHSF) lower the upper experiment module and base of the Cassini orbiter onto a work stand during prelaunch processing, testing and integration work in that... More

An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the back cover and heat shield of the Huygens probe during prelaunch processing, testing and integration in that facility. The Huygens probe and the Cassini orbiter being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc728

An employee in the Payload Hazardous Servicing Facility (PHSF) sews th...

An employee in the Payload Hazardous Servicing Facility (PHSF) sews thermal insulation material on the back cover and heat shield of the Huygens probe during prelaunch processing, testing and integration in tha... More

An employee in the Payload Hazardous Servicing Facility (PHSF) works on the top side of the experiment platform for the Huygens probe that will accompany the Cassini orbiter to Saturn during prelaunch processing, testing and integration in that facility. The Huygens probe and the Cassini orbiter being processed at KSC are the two primary components of the Cassini spacecraft, which will be launched on a Titan IVB/Centaur expendable launch vehicle from Cape Canaveral Air Station. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn’s largest moon, Titan. The orbiter was designed and assembled at NASA’s Jet Propulsion Laboratory in California. Following postflight inspections, integration of the 12 science instruments not already installed on the orbiter will be completed. Then, the parabolic high-gain antenna and the propulsion module will be mated to the orbiter, followed by the Huygens probe, which will complete spacecraft integration. The Cassini mission is targeted for an Oct. 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004 KSC-97pc730

An employee in the Payload Hazardous Servicing Facility (PHSF) works o...

An employee in the Payload Hazardous Servicing Facility (PHSF) works on the top side of the experiment platform for the Huygens probe that will accompany the Cassini orbiter to Saturn during prelaunch processin... More

Cassini's High and Low Gain Antenna KSC-97pc768

Cassini's High and Low Gain Antenna KSC-97pc768

Cassini's High and Low Gain Antenna Public domain photograph of a spacecraft, space exploration, free to use, no copyright restrictions image - Picryl description

Cassini's High and Low Gain Antenna KSC-97pc767

Cassini's High and Low Gain Antenna KSC-97pc767

Cassini's High and Low Gain Antenna Public domain photograph of NASA satellite, free to use, no copyright restrictions image - Picryl description Public domain photograph of a spacecraft, space exploration, f... More

Cassini's High and Low Gain Antenna KSC-97pc766

Cassini's High and Low Gain Antenna KSC-97pc766

Cassini's High and Low Gain Antenna Public domain photograph of a spacecraft, space exploration, free to use, no copyright restrictions image - Picryl description

Environmental Health Specialist Jamie A. Keeley, of EG&G Florida Inc., uses an ion chamber dose rate meter to measure radiation levels in one of three radioisotope thermoelectric generators (RTGs) that will provide electrical power to the Cassini spacecraft on its mission to explore the Saturnian system. The three RTGs and one spare are being tested and mointored in the Radioisotope Thermoelectric Generator Storage Building in the KSC's Industrial Area. The RTGs use heat from the natural decay of plutonium to generate electric power. RTGs enable spacecraft to operate far from the Sun where solar power systems are not feasible. The RTGs on Cassini are of the same design as those flying on the already deployed Galileo and Ulysses spacecraft. The Cassini mission is targeted for an Oct. 6 launch aboard a Titan IVB/Centaur expendable launch vehicle. KSC-97PC903

Environmental Health Specialist Jamie A. Keeley, of EG&G Florida Inc.,...

Environmental Health Specialist Jamie A. Keeley, of EG&G Florida Inc., uses an ion chamber dose rate meter to measure radiation levels in one of three radioisotope thermoelectric generators (RTGs) that will pro... More

Cassini's Radioisotope Thermoelectric Generator KSC-97PC902

Cassini's Radioisotope Thermoelectric Generator KSC-97PC902

Cassini's Radioisotope Thermoelectric Generator Public domain photograph related to NASA research activity, space exploration, free to use, no copyright restrictions image - Picryl description

Titan Cassini Remote Sensing Platform installation in the Payload Hazardous Servicing Facility KSC-97PC861

Titan Cassini Remote Sensing Platform installation in the Payload Haza...

Titan Cassini Remote Sensing Platform installation in the Payload Hazardous Servicing Facility

Titan Cassini Remote Sensing Platform installation in the Payload Hazardous Servicing Facility KSC-97PC858

Titan Cassini Remote Sensing Platform installation in the Payload Haza...

Titan Cassini Remote Sensing Platform installation in the Payload Hazardous Servicing Facility

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility KSC-1417f02

The cover on the Cassini Propulsion Module is installed, and the modul...

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility KSC-1417f05

The cover on the Cassini Propulsion Module is installed, and the modul...

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility KSC-1419f07

The cover on the Cassini Propulsion Module is installed, and the modul...

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility

Jet Propulsion Laboratory (JPL) technicians finish mounting a thermal model of a radioisotope thermoelectric generator (RTG) on the installation cart which will be used to install the RTG in the Cassini spacecraft at Level 14 of Space Launch Complex 40, Cape Canaveral Air Station. The technicians use the thermal model to practice installation procedures. The three actual RTGs which will provide electrical power to Cassini on its 6.7-mile trip to the Saturnian system, and during its four-year mission at Saturn, are being tested and monitored in the Radioisotope Thermoelectric Generator Storage Building in KSC's Industrial Area. The RTGs use heat from the natural decay of plutonium to generate electric power. RTGs enable spacecraft to operate far from the Sun where solar power systems are not feasible. The RTGs on Cassini are of the same design as those flying on the already deployed Galileo and Ulysses spacecraft. The Cassini mission is targeted for an October 6 launch aboard a Titan IVB/Centaur expendable launch vehicle. Cassini is built and managed for NASA by JPL KSC-10941f07

Jet Propulsion Laboratory (JPL) technicians finish mounting a thermal ...

Jet Propulsion Laboratory (JPL) technicians finish mounting a thermal model of a radioisotope thermoelectric generator (RTG) on the installation cart which will be used to install the RTG in the Cassini spacecr... More

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility KSC-1418f07

The cover on the Cassini Propulsion Module is installed, and the modul...

The cover on the Cassini Propulsion Module is installed, and the module is moved to the Payload Hazardous Servicing Facility

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, approaches the pad at Launch Complex 40, Cape Canaveral Air Station. At the pad, the Centaur upper stage will be added and, eventually, the prime payload, the Cassini spacecraft. Cassini will explore the Saturnian system, including the planet’s rings and moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 KSC-97PC871

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (...

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, approaches the pad at Launch Complex 40, Cape ... More

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, arrive at the pad at Launch Complex 40, Cape Canaveral Air Station. At the pad, the Centaur upper stage will be added and, eventually, the prime payload, the Cassini spacecraft. Cassini will explore the Saturnian system, including the planet’s rings and moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 KSC-97PC872

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (...

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, arrive at the pad at Launch Complex 40, Cape C... More

A Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) depart from the Solid Rocket Motor Assembly and Readiness Facility (SMARF), Cape Canaveral Air Station (CCAS), en route to Launch Complex 40. At the pad, the Centaur upper stage will be added and, eventually, the prime payload, the Cassini spacecraft. Cassini will explore the Saturnian system, including the planet’s rings and moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Pad 40, CCAS KSC-97PC870

A Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SR...

A Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) depart from the Solid Rocket Motor Assembly and Readiness Facility (SMARF), Cape Canaveral Air Station (CCAS), en route to Launch Co... More

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, arrive at the pad at Launch Complex 40, Cape Canaveral Air Station. At the pad, the Centaur upper stage will be added and, eventually, the prime payload, the Cassini spacecraft. Cassini will explore the Saturnian system, including the planet’s rings and moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 KSC-97PC869

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (...

The Titan IVB core vehicle and its twin Solid Rocket Motor Upgrades (SRMUs) which will be used to propel the Cassini spacecraft to its final destination, Saturn, arrive at the pad at Launch Complex 40, Cape C... More

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF) KSC-97PC918

The forward shield is installed on the Titan/Cassini probe in the Payl...

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF)

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF) KSC-97PC919

The forward shield is installed on the Titan/Cassini probe in the Payl...

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF)

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is prepared for hoisting at Launch Pad 40 at Cape Canaveral Air Station to be mated with the Titan IV expendable launch vehicle that will propel the Cassini spacecraft and the European Space Agency's Huygens probe to Saturn and its moon Titan. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn's largest moon, Titan. The orbiter was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini mission is targeted for an October 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004. KSC-97PC915

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is prepared for ho...

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is prepared for hoisting at Launch Pad 40 at Cape Canaveral Air Station to be mated with the Titan IV expendable launch vehicle that will propel the Cassini s... More

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF) KSC-97PC920

The forward shield is installed on the Titan/Cassini probe in the Payl...

The forward shield is installed on the Titan/Cassini probe in the Payload Hazardous Servicing Facility (PHSF)

Titan/Cassini erection of K3 KSC-97PC917

Titan/Cassini erection of K3 KSC-97PC917

Titan/Cassini erection of K3 Public domain photograph of NASA rocket launch, free to use, no copyright restrictions image - Picryl description

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is hoisted at Launch Pad 40 at Cape Canaveral Air Station for mating with the Titan IV expendable launch vehicle that will propel the Cassini spacecraft and the European Space Agency's Huygens probe to Saturn and its moon Titan. Cassini will explore Saturn, its rings and moons for four years. The Huygens probe, designed and developed for the European Space Agency (ESA), will be deployed from the orbiter to study the clouds, atmosphere and surface of Saturn's largest moon, Titan. The orbiter was designed and assembled at NASA's Jet Propulsion Laboratory in California. The Cassini mission is targeted for an October 6 launch to begin its 6.7-year journey to the Saturnian system. Arrival at the planet is expected to occur around July 1, 2004. KSC-97PC916

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is hoisted at Laun...

KENNEDY SPACE CENTER, FLA. -- A Centaur upper stage is hoisted at Launch Pad 40 at Cape Canaveral Air Station for mating with the Titan IV expendable launch vehicle that will propel the Cassini spacecraft and t... More

The aft shield is installed on the Huygens probe in the Payload Hazardous Servicing Facility (PHSF). The European Space Agency's Huygens probe will be attached to the Cassini spacecraft which will explore the Titan moon of the Saturnian system KSC-97PC925

The aft shield is installed on the Huygens probe in the Payload Hazar...

The aft shield is installed on the Huygens probe in the Payload Hazardous Servicing Facility (PHSF). The European Space Agency's Huygens probe will be attached to the Cassini spacecraft which will explore the... More

The aft shield is installed on the Huygens probe in the Payload Hazardous Servicing Facility (PHSF). The European Space Agency's Huygens probe will be attached to the Cassini spacecraft which will explore the Titan moon of the Saturnian system KSC-97PC926

The aft shield is installed on the Huygens probe in the Payload Hazar...

The aft shield is installed on the Huygens probe in the Payload Hazardous Servicing Facility (PHSF). The European Space Agency's Huygens probe will be attached to the Cassini spacecraft which will explore the... More

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC982

The propulsion system is mated to the Lower Equipment Module of the Ca...

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s ring... More

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC977

The Lower Equipment Module of the Cassini spacecraft is lifted into a ...

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and i... More

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC976

The Lower Equipment Module of the Cassini spacecraft is lifted into a ...

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and i... More

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC981

The propulsion system is mated to the Lower Equipment Module of the Ca...

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s ring... More

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC979

The propulsion system is mated to the Lower Equipment Module of the Ca...

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s ring... More

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC978

The Lower Equipment Module of the Cassini spacecraft is lifted into a ...

The Lower Equipment Module of the Cassini spacecraft is lifted into a workstand in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and i... More

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC983

The propulsion system is mated to the Lower Equipment Module of the Ca...

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s ring... More

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s rings and its moon, Titan. Launch of the Cassini mission to Saturn is scheduled for Oct. 6 from Launch Complex 40, Cape Canaveral Air Station, aboard a Titan IVB unmanned vehicle KSC-97PC980

The propulsion system is mated to the Lower Equipment Module of the Ca...

The propulsion system is mated to the Lower Equipment Module of the Cassini spacecraft in the Payload Hazardous Servicing Facility (PHSF). Cassini will explore the Saturnian system, including the planet’s ring... More

Technicians from the Jet Propulsion Laboratory (JPL) attach the upper equipment module to the propulsion module and the lower equipment module in the Payload Hazardous Servicing Facility in July prior to installation on the Cassini spacecraft at KSC. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. JPL is managing the Cassini project for NASA KSC-97PC1015

Technicians from the Jet Propulsion Laboratory (JPL) attach the upper...

Technicians from the Jet Propulsion Laboratory (JPL) attach the upper equipment module to the propulsion module and the lower equipment module in the Payload Hazardous Servicing Facility in July prior to inst... More

Jet Propulsion Laboratory (JPL) technicians clean and prepare the upper equipment module for mating with the propulsion module subsystem of the Cassini orbiter in the Payload Hazardous Servicing Facility at KSC in July. A four- year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1018

Jet Propulsion Laboratory (JPL) technicians clean and prepare the upp...

Jet Propulsion Laboratory (JPL) technicians clean and prepare the upper equipment module for mating with the propulsion module subsystem of the Cassini orbiter in the Payload Hazardous Servicing Facility at K... More

Jet Propulsion Laboratory (JPL) technicians in a blue crane at the top of the white upper equipment module (UEM) level the UEM prior to separation from its dolly. The module will be prepared for stacking atop Cassini’s propulsion module in the Payload Hazardous Servicing Facility at KSC. Cassini, a four-year, close-up study of the Saturnian system, is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1017

Jet Propulsion Laboratory (JPL) technicians in a blue crane at the to...

Jet Propulsion Laboratory (JPL) technicians in a blue crane at the top of the white upper equipment module (UEM) level the UEM prior to separation from its dolly. The module will be prepared for stacking atop... More

Technicians from the Jet Propulsion Laboratory (JPL) lower the upper equipment module over a propellant tank in the Payload Hazardous Servicing Facility at KSC in July prior to installation on the Cassini orbiter. A four-year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. The propellant tank will assist with guidance of the orbiter and power during the spacecraft’s voyage and in-orbit periods. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1016

Technicians from the Jet Propulsion Laboratory (JPL) lower the upper ...

Technicians from the Jet Propulsion Laboratory (JPL) lower the upper equipment module over a propellant tank in the Payload Hazardous Servicing Facility at KSC in July prior to installation on the Cassini orb... More

Technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology lift the remote sensing pallet in the Payload Hazardous Servicing Facility at KSC in July prior to installation on the Cassini spacecraft. A four- year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1026

Technicians from the Jet Propulsion Laboratory (JPL) of the Californi...

Technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology lift the remote sensing pallet in the Payload Hazardous Servicing Facility at KSC in July prior to installation o... More

The complete remote sensing pallet is lowered by technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology and mated at the interface with the Cassini spacecraft in the Payload Hazardous Servicing Facility at KSC in July. A four-year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1028

The complete remote sensing pallet is lowered by technicians from the...

The complete remote sensing pallet is lowered by technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology and mated at the interface with the Cassini spacecraft in the Pa... More

The complete remote sensing pallet is lowered by technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology to mate with the Cassini spacecraft in the Payload Hazardous Servicing Facility at KSC in July. A four-year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1027

The complete remote sensing pallet is lowered by technicians from th...

The complete remote sensing pallet is lowered by technicians from the Jet Propulsion Laboratory (JPL) of the California Institute of Technology to mate with the Cassini spacecraft in the Payload Hazardous Se... More

Jet Propulsion Laboratory (JPL) technicians reposition and level the Cassini orbiter in the Payload Hazardous Servicing Facility at KSC in July after stacking the craft’s upper equipment module on the propulsion module. A four-year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1020

Jet Propulsion Laboratory (JPL) technicians reposition and level the ...

Jet Propulsion Laboratory (JPL) technicians reposition and level the Cassini orbiter in the Payload Hazardous Servicing Facility at KSC in July after stacking the craft’s upper equipment module on the propuls... More

Jet Propulsion Laboratory (JPL) technicians reposition and level the Cassini orbiter in the Payload Hazardous Servicing Facility at KSC in July after stacking the craft’s upper equipment module on the propulsion module. A four-year, close-up study of the Saturnian system, the Cassini mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Scientific instruments carried aboard the spacecraft will study Saturn’s atmosphere, magnetic field, rings, and several moons. JPL is managing the Cassini project for NASA KSC-97PC1019

Jet Propulsion Laboratory (JPL) technicians reposition and level the ...

Jet Propulsion Laboratory (JPL) technicians reposition and level the Cassini orbiter in the Payload Hazardous Servicing Facility at KSC in July after stacking the craft’s upper equipment module on the propuls... More

Daimler-Benz Aerospace staff prepare to remove the lift fixture used to install the back cover on the Huygens probe, the conical structure in the white workstand, in the Payload Hazardous Servicing Facility at KSC. Instruments mounted on the probe, which was developed by the European Space Agency (ESA), will receive atmospheric and surface data on Saturn’s main moon, Titan, to send back to Earth as part of the Cassini mission. The back cover, yet to be attached to the Cassini orbiter, will protect the probe during descent onto Titan. A four-year, close-up study of the Saturnian system, Cassini is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Aerospatiale is the prime contractor for ESA KSC-97PC1021

Daimler-Benz Aerospace staff prepare to remove the lift fixture used ...

Daimler-Benz Aerospace staff prepare to remove the lift fixture used to install the back cover on the Huygens probe, the conical structure in the white workstand, in the Payload Hazardous Servicing Facility a... More

Daimler-Benz Aerospace staff install the back cover on the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which was developed by the European Space Agency (ESA), will receive atmospheric and surface data on Saturn’s main moon, Titan, to send back to Earth as part of the Cassini mission. The back cover, yet to be attached to the Cassini orbiter, will protect the probe during descent onto Titan. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Aerospatiale is the prime contractor for ESA KSC-97PC1022

Daimler-Benz Aerospace staff install the back cover on the Huygens pr...

Daimler-Benz Aerospace staff install the back cover on the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which was developed by the European Space... More

A Daimler-Benz Aerospace staff member inspects the heat shield of the Huygens probe after the shield was installed in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which is owned by the European Space Agency, will receive atmospheric and surface data on Saturn’s main moon, Titan, to send back to Earth as part of the Cassini mission. The back cover, yet to be attached to the Cassini orbiter, will protect the probe during descent onto Titan. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Aerospatiale is the prime contractor for ESA KSC-97PC1025

A Daimler-Benz Aerospace staff member inspects the heat shield of the...

A Daimler-Benz Aerospace staff member inspects the heat shield of the Huygens probe after the shield was installed in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe,... More

Daimler-Benz Aerospace staff install the back cover on the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which was developed by the European Space Agency (ESA), will receive atmospheric and surface data on Saturn’s main moon, Titan, to send back to Earth as part of the Cassini mission. The back cover, yet to be attached to the Cassini orbiter, will protect the probe during descent onto Titan. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Aerospatiale is the prime contractor for ESA KSC-97PC1023

Daimler-Benz Aerospace staff install the back cover on the Huygens pr...

Daimler-Benz Aerospace staff install the back cover on the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which was developed by the European Space... More

A Daimler-Benz Aerospace staff member installs thermal blanket insulation on the back cover of the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, which is owned by the European Space Agency (ESA), will receive atmospheric and surface data on Saturn’s main moon, Titan, to send back to Earth as part of the Cassini mission. The back cover, yet to be attached to the Cassini orbiter, will protect the probe during descent onto Titan. A four-year, close-up study of the Saturnian system, the mission is scheduled for launch from Cape Canaveral Air Station in October 1997. It will take seven years for the spacecraft to reach Saturn. Aerospatiale is the prime contractor for ESA KSC-97PC1024

A Daimler-Benz Aerospace staff member installs thermal blanket insula...

A Daimler-Benz Aerospace staff member installs thermal blanket insulation on the back cover of the Huygens probe in the Payload Hazardous Servicing Facility at KSC in July. Instruments mounted on the probe, w... More

Jet Propulsion Laboratory (JPL) workers David Rice, at left, and Johnny Melendez rotate a radioisotope thermoelectric generator (RTG) to the horizontal position on a lift fixture in the Payload Hazardous Servicing Facility. The RTG is one of three generators which will provide electrical power for the Cassini spacecraft mission to the Saturnian system. The RTGs will be installed on the powered-up spacecraft for mechanical and electrical verification testing. RTGs use heat from the natural decay of plutonium to generate electric power. The generators enable spacecraft to operate far from the Sun where solar power systems are not feasible. The Cassini mission is scheduled for an Oct. 6 launch aboard a Titan IVB/Centaur expendable launch vehicle. Cassini is built and managed for NASA by JPL KSC-97PC1069

Jet Propulsion Laboratory (JPL) workers David Rice, at left, and John...

Jet Propulsion Laboratory (JPL) workers David Rice, at left, and Johnny Melendez rotate a radioisotope thermoelectric generator (RTG) to the horizontal position on a lift fixture in the Payload Hazardous Serv... More

Previous

of 3

Next