MIXER MODEL WITH SURVEY RAKES INSTALLED

Similar

CAPE CANAVERAL, Fla. – Wearing harnesses, STS-128 crew members check out space shuttle Discovery in Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida. From left are Mission Specialists Patrick Forrester and John "Danny" Olivas, Commander Rick Sturckow, Mission Specialist Nicole Stott, Pilot Kevin Ford and Mission Specialist Christer Fuglesang. The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3591

CAPE CANAVERAL, Fla. – Wearing harnesses, STS-128 crew members check out space shuttle Discovery in Orbiter Processing Facility 3 at NASA's Kennedy Space Center in Florida. From left are Mission Specialists Patrick Forrester and John "Danny" Olivas, Commander Rick Sturckow, Mission Specialist Nicole Stott, Pilot Kevin Ford and Mission Specialist Christer Fuglesang. The crew is at Kennedy for a crew equipment interface test, or CEIT, which provides hands-on training and observation of shuttle and flight hardware. The STS-128 flight will carry science and storage racks to the International Space Station on Discovery. Launch is targeted for Aug. 7. Photo credit: NASA/Jim Grossmann KSC-2009-3591

Ares 1-X group photo of safety and mission assurance

Ares 1-X group photo of safety and mission assurance

KENNEDY SPACE CENTER, FLA. -- Inside the White Room on Launch Pad 39B, workers get ready to move a cart through the hatch into Space Shuttle Discovery. The cart contains the extravehicular mobility units (or spacewalk suits) to be used on mission STS-116. The suits will be stored inside Discovery. Launch of Discovery is scheduled for 9:35 p.m. Dec. 7. The crew will deliver the P5 integrated truss to the International Space Station and install it during one or more extravehicular activities. Photo credit: NASA/Jack Pfaller KSC-06pd2625

KENNEDY SPACE CENTER, FLA. -- Inside the White Room on Launch Pad 39B, workers get ready to move a cart through the hatch into Space Shuttle Discovery. The cart contains the extravehicular mobility units (or spacewalk suits) to be used on mission STS-116. The suits will be stored inside Discovery. Launch of Discovery is scheduled for 9:35 p.m. Dec. 7. The crew will deliver the P5 integrated truss to the International Space Station and install it during one or more extravehicular activities. Photo credit: NASA/Jack Pfaller KSC-06pd2625

KENNEDY SPACE CENTER, FLA. -- In Hangar M on Cape Canaveral Air Force Station, an overhead crane lifts the Delta II first stage off its stand. It will be placed onto a transporter for its move to the launch pad. Dawn's mission is to explore two of the asteroid belt's most intriguing and dissimilar occupants: asteroid Vesta and the dwarf planet Ceres. Dawn is scheduled to launch June 30 from Launch Complex 17-B. Photo credit: NASA/Jack Pfaller KSC-07pd1215

KENNEDY SPACE CENTER, FLA. -- In Hangar M on Cape Canaveral Air Force Station, an overhead crane lifts the Delta II first stage off its stand. It will be placed onto a transporter for its move to the launch pad. Dawn's mission is to explore two of the asteroid belt's most intriguing and dissimilar occupants: asteroid Vesta and the dwarf planet Ceres. Dawn is scheduled to launch June 30 from Launch Complex 17-B. Photo credit: NASA/Jack Pfaller KSC-07pd1215

CAPE CANAVERAL, Fla. – In the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida, cranes attached to the Ares I-X center forward segment lift it off the transporter to raise it to vertical. Once vertical, the segment will be moved to a stand. The booster used for the Ares I-X launch is being modified by adding new forward structures and a fifth segment simulator. The stacking operations are scheduled to begin in the Vehicle Assembly Building in April. Launch of the Ares I-X flight test is targeted for July 2009. Photo credit: NASA/Troy Cryder KSC-2009-2494

CAPE CANAVERAL, Fla. – In the Rotation, Processing and Surge Facility at NASA's Kennedy Space Center in Florida, cranes attached to the Ares I-X center forward segment lift it off the transporter to raise it to vertical. Once vertical, the segment will be moved to a stand. The booster used for the Ares I-X launch is being modified by adding new forward structures and a fifth segment simulator. The stacking operations are scheduled to begin in the Vehicle Assembly Building in April. Launch of the Ares I-X flight test is targeted for July 2009. Photo credit: NASA/Troy Cryder KSC-2009-2494

KENNEDY SPACE CENTER, FLA. -- Inside the mobile service tower of Launch Pad 17-A at Cape Canaveral Air Force Station in Florida, workers begin to remove the plastic covering from NASA's Phoenix Mars Lander. Phoenix is scheduled to launch on the Delta II launch vehicle no earlier than Aug. 3. Phoenix will land in icy soils near the north polar permanent ice cap of Mars and explore the history of the water in these soils and any associated rocks, while monitoring polar climate. Landing on Mars is planned in May 2008 on arctic ground where a mission currently in orbit, Mars Odyssey, detected high concentrations of ice just beneath the top layer of soil. NASA/George Shelton KSC-07pd2095

KENNEDY SPACE CENTER, FLA. -- Inside the mobile service tower of Launch Pad 17-A at Cape Canaveral Air Force Station in Florida, workers begin to remove the plastic covering from NASA's Phoenix Mars Lander. Phoenix is scheduled to launch on the Delta II launch vehicle no earlier than Aug. 3. Phoenix will land in icy soils near the north polar permanent ice cap of Mars and explore the history of the water in these soils and any associated rocks, while monitoring polar climate. Landing on Mars is planned in May 2008 on arctic ground where a mission currently in orbit, Mars Odyssey, detected high concentrations of ice just beneath the top layer of soil. NASA/George Shelton KSC-07pd2095

MIXER MODEL WITH SURVEY RAKES INSTALLED

description

Summary

The original finding aid described this as:

Capture Date: 3/26/1979

Photographer: JOHN MARTON

Keywords: 1979_01132.jpg c1979_01100s Larsen Scan

Location Building No: 5

Location Room: CE-22
Photographs Relating to Agency Activities, Facilities and Personnel

label_outline

Tags

mixer
model
mixer model
survey
rakes
survey rakes
nasa
national aeronautics and space administration
high resolution
ultra high resolution
ce 22 photographs
location room
photographer
john marton
nasa photographs
us national archives
date_range

Date

1979
create

Source

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright info

No known copyright restrictions

Explore more

mixer
mixer
model
model
mixer model
mixer model
survey
survey
rakes
rakes
survey rakes
survey rakes
nasa
nasa
national aeronautics and space administration
national aeronautics and space administration
high resolution
high resolution
ultra high resolution
ultra high resolution
ce 22 photographs
ce 22 photographs
location room
location room
photographer
photographer
john marton
john marton
nasa photographs
nasa photographs
us national archives
us national archives