FLAC (USAF 55% Scale) Model, Machine Shop N-220 . fitting wing panels (with Cesar Acosta) ARC-1994-AC94-0028-13

Similar

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training with the tools and equipment they'll use in space and familiarization of the payload they'll be delivering to the International Space Station. Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Frankie Martin KSC-2010-5599

CAPE CANAVERAL, Fla. -- In the Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida, the STS-134 crew and technicians check out space shuttle Endeavour's payload bay. The six STS-134 astronauts are participating in the Crew Equipment Interface Test (CEIT), which gives them an opportunity for hands-on training with the tools and equipment they'll use in space and familiarization of the payload they'll be delivering to the International Space Station. Endeavour is targeted to launch on the STS-134 mission Feb. 27, 2011. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Frankie Martin KSC-2010-5599

An overall view of the pilot house aboard the mine countermeasures ship SCOUT (MCM-8). The ship is currently under construction

An overall view of the pilot house aboard the mine countermeasures ship SCOUT (MCM-8). The ship is currently under construction

CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida remove space shuttle Discovery's right-hand inner heat shield from engine No. 1. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display.Photo credit: NASA/Kim Shiflett KSC-2011-2417

CAPE CANAVERAL, Fla. - Crews in Orbiter Processing Facility-2 at NASA's Kennedy Space Center in Florida remove space shuttle Discovery's right-hand inner heat shield from engine No. 1. The removal is part of Discovery's transition and retirement processing. Work performed on Discovery is expected to help rocket designers build next-generation spacecraft and prepare the shuttle for future public display.Photo credit: NASA/Kim Shiflett KSC-2011-2417

Discovery T&R Removal of Heat Shield Around Engine #3 2011-2417

Discovery T&R Removal of Heat Shield Around Engine #3 2011-2417

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Power Plant, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Power Plant, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

CAPE CANAVERAL, FIa. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for installation. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2945

CAPE CANAVERAL, FIa. -- In Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center in Florida, a Hyster forklift (near top) moves space shuttle main engine No. 1 closer to space shuttle Discovery for installation. Each engine is 14 feet long, weighs about 6,700 pounds, and is 7.5 feet in diameter at the end of the nozzle. Discovery is being processed for its next mission, STS-119, targeted for launch on Feb. 12, 2009. Discovery and its crew will deliver integrated truss structure 6 (S6) and solar arrays to the International Space Station. Photo credit: NASA/Dimitri Gerondidakis KSC-08pd2945

FLAC (USAF 55% Scale) Model, Machine Shop N-220 . fitting wing panels (with Cesar Acosta) ARC-1994-AC94-0028-13

description

Summary

FLAC (USAF 55% Scale) Model, Machine Shop N-220 . fitting wing panels (with Cesar Acosta)

label_outline

Tags

flac
arc
tom reddy
ames research center
usaf
scale
model
machine
shop
machine shop n
panels
cesar
acosta
cesar acosta
high resolution
machine shop n 220
industrial facilities
machine shops
nasa
date_range

Date

05/07/1994
create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

Explore more

flac
flac
arc
arc
tom reddy
tom reddy
ames research center
ames research center
usaf
usaf
scale
scale
model
model
machine
machine
shop
shop
machine shop n
machine shop n
panels
panels
cesar
cesar
acosta
acosta
cesar acosta
cesar acosta
high resolution
high resolution
machine shop n 220
machine shop n 220
industrial facilities
industrial facilities
machine shops
machine shops
nasa
nasa