Similar
CONGRESSWOMAN DONNA EDWARDS VISIT TO GSFC
NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft / SOLAR PANEL INSTALL
NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft
NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, STS-126 Mission Specialist Shane Kimbrough gets a closer look at hardware inside space shuttle Endeavour's payload bay. Members of space shuttle Endeavour's STS-126 crew are at Kennedy to participate in a crew equipment interface test, or CEIT. The CEIT provides experience handling tools, equipment and hardware they will use on the mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2257
KENNEDY SPACE CENTER, FLA. - This bird's-eye view of a high bay in the Orbiter Processing Facility (OPF) shows Space Shuttle Atlantis surrounded by the standard platforms and equipment required to process a Space Shuttle orbiter for flight. The high bay is 197 feet (60 meters) long, 150 feet (46 meters) wide, 95 feet (29 meters) high, and encompasses a 29,000-square-foot (2,694-meter) area. Platforms, a main access bridge, and two rolling bridges with trucks provide access to various parts of the orbiter. The next mission scheduled for Atlantis is STS-114, a utilization and logistics flight to the International Space Station.
CAPE CANAVERAL, Fla. – In NASA Kennedy Space Center's Orbiter Processing Facility bay 2, a crane lifts space shuttle Endeavour's Orbiter Boom Sensor System and moves it toward the payload bay for reinstallation. The OBSS is a 50-foot boom with a laser and cameras on it that astronauts use to inspect a shuttle's heat shield while in orbit. After returning from the STS-127 mission July 31, 2009, Endeavour now is being processed for the STS-130 mission targeted for Feb. 4, 2010. Endeavour will deliver to the International Space Station the Tranquility pressurized module that will provide room for many of the station's life support systems. Photo credit: NASA/Jack Pfaller KSC-2009-4989
KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility can be seen the U.S. Node 2 (at left) and the Japanese Experiment Module (JEM)’s Pressurized Module (at right). The Italian-built Node 2, the second of three Space Station connecting modules, attaches to the end of the U.S. Lab and will provide attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet. The Pressurized Module is the first element of the JEM to be delivered to KSC. The JEM is Japan's primary contribution to the Station. It will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments. The JEM also includes an exposed facility (platform) for space environment experiments, a robotic manipulator system, and two logistics modules. The various JEM components will be assembled in space over the course of three Shuttle missions.
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians prepare to lift the nitrogen tank assembly to move it to the Express Logistics Carrier 1, or ELC-1. The carrier is part of the STS-129 payload on space shuttle Atlantis, which will deliver to the International Space Station two spare gyroscopes, two nitrogen tank assemblies, two pump modules, an ammonia tank assembly and a spare latching end effector for the station's robotic arm. STS-129 is targeted to launch Nov. 12. Photo credit: NASA/Jim Grossmann KSC-2009-4708
Related
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA)
Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA)
Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA)
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Первоначальная помощь в поиске описала это следующим образом: Описание: Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA) Мбаппе: Дебби Маккаллум Дата: 8 / 19 / 2008 Номер: 2008-00590-8 Preservation Copy: .tif 2008
Резюме
Космический аппарат НАСА Lunar Reconnaissance Orbiter (LRO) / Lunar Orbiter Laser Altimeter (LOLA)
Ничего не найдено.
Тэги
НАСА
лунный
разведка
орбитальный аппарат
лунный разведывательный орбитальный аппарат
лро
космический корабль
лазер
высотомер
орбитальный лазерный высотомер
лола
поверхность луны
посадка на Луну
высокое разрешение
лазерный высотомер для орбитального аппарата Луны
Дебби Маккаллум
номер работы
сохраненная копия
космическая программа
Дата
2006 - 2011
Источник
The U.S. National Archives
Ссылка
Информация о правах
No known copyright restrictions