visibility Similar

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, an overhead crane lowers the S3/S4 integrated truss structure onto a work stand. It was moved from a rotation stand at left. Along with a third set of solar arrays and batteries, the truss is scheduled to fly on mission STS-117 aboard Space Shuttle Atlantis to the International Space Station. The crew of six astronauts will install the truss to continue assembly of the station. Photo credit: NASA/Dimitri Gerondidakis KSC-06pd2230

CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane is lowered onto Kibo Experiment Logistics Module Exposed Section, or ELM-ES. The crane will transfer the ES to the payload canister that will transport it to Launch Pad 39A. The ELM-ES is one of the final components of the Japan Aerospace Exploration Agency's Kibo laboratory for the International Space Station. It can provide payload storage space and can carry up to three payloads at launch. The canister will deliver the ELM-ES and other elements to Launch Pad 39A for installation in space shuttle Endeavour's payload bay. The STS-127 mission is targeted for launch June 13. Photo credit: NASA/Jack Pfaller KSC-2009-3129

Delta II - SIRTF Lift and Mate. NASA public domain image. Kennedy space center.

CAPE CANAVERAL, Fla. – Technicians lift a special fixture inside the high bay of the Operations & Checkout Building at NASA's Kennedy Space Center in Florida. The fixture is designed to enable precise pre-launch processing of the Orion spacecraft. An Orion capsule is being prepared to make a flight test in 2014 on a mission that will not carry any astronauts. Photo by Tim Jacobs KSC-2012-6446

KENNEDY SPACE CENTER, FLA. - Workers at Astrotech Space Operations’ hazardous processing facility remove a protective cover around the MESSENGER spacecraft. It was moved the site in preparation for loading the spacecraft’s complement of hypergolic propellants. MESSENGER is scheduled to launch Aug. 2 aboard a Boeing Delta II rocket from Pad 17-B, Cape Canaveral Air Force Station, Fla., bound for Mercury. The spacecraft is expected to reach orbit around Mercury in March 2011. MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md. KSC-04pd1380

STS-131 MPLM LEONARDO MOVE FROM WORKSTAND TO WEIGHT & CG THEN MOVE TO CANISTER 2010-2230

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, an overhead crane lowers the Raffaello multi-purpose logistics module, or MPLM, into a payload canister. Commander Chris Ferguson, Pilot Doug Hurley and Mission Specialists Sandra Magnus and Rex Walheim are targeted to lift off on space shuttle Atlantis July 8, taking with them the MPLM packed with supplies, logistics and spare parts to the International Space Station. The STS-135 mission also will fly a system to investigate the potential for robotically refueling existing spacecraft and return a failed ammonia pump module to help NASA better understand the failure mechanism and improve pump designs for future systems. STS-135 will be the 33rd flight of Atlantis, the 37th shuttle mission to the space station, and the 135th and final mission of NASA's Space Shuttle Program. For more information, visit www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts135/index.html. Photo credit: NASA/Jim Grossmann KSC-2011-4414

CAPE CANAVERAL, Fla. --CAPE CANAVERAL, Fla. -- In the high bay of the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center, three carriers are undergoing processing for space shuttle Atlantis' STS-125 mission to service the Hubble Space Telescope. From left are the Flight Support System or FSS, the Orbital Replacement Unit Carrier or ORUC, and the Super Lightweight Interchangeable Carrier or SLIC. The Multi-Use Lightweight Equipment carrier will be delivered in early August. The carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the Hubble servicing mission, targeted for launch Oct. 8. Photo credit: NASA/Jack Pfaller KSC-08pd2100

RBSP, B Canister removal, unbagging, into workstand, final solar panels into work stands 2012-2664

code Related

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Das NASA-Raumschiff Lunar Reconnaissance Orbiter (LRO) MOVE TO VIBE CHAMBER Fotograf: DEBBIE McCALLUM Datum: 22.7.2008 Arbeitsnummer: 2008-00590-3 Konservierungskopie:.tif 2008

description

Zusammenfassung

NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) BEWEGEN KAMBER

Nichts gefunden.

label_outline

Tags

NASA Mond- Aufklärung Orbiter Mondaufklärungsorbiter lro Raumfahrzeug Bewegung Raumschiff bewegen Stimmung Kammer Mondoberfläche Mondlandung hohe Auflösung ultrahohe Auflösung Vibe-Kammer debbie mccallum Auftragsnummer Erhaltungskopie Weltraumprogramm
date_range

Datum

2006 - 2011
create

Quelle

The U.S. National Archives
link

Link

https://catalog.archives.gov/
copyright

Copyright-info

No known copyright restrictions

label_outline Explore Spacecraft Move, Vibe Chamber, Vibe

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Das NASA-Raumschiff Lunar Reconnaissance Orbiter (LRO) MOVE TO VIBE CHAMBER Fotograf: DEBBIE McCALLUM Datum: 22.7.2008 Arbeitsnummer: 2008-00590-3 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: SAMPLE ANALYSIS AT MARS (SAM) MEDIA DAY Fotograf: DEBBIE McCALLUM Datum: 12.5.2008 Arbeitsnummer: 2009-00375-0 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Die NASA-Sonde Lunar Reconnaissance Orbiter (LRO) Fotograf: DEBBIE McCALLUM Datum: 17.07.2008 Arbeitsnummer: 2008-00590-2 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dieses Foto wie folgt: [Vollständige] Bildunterschrift: Maschinenreparateur dritter Klasse (DV) Erin Telitz arbeitet mit Signalman First Class (EOD / SW) Joel Blea zusammen, während er mit einem Patienten und medizinischen Taucher an Bord der USS DENVER (LPD 9) während einer Übung auf dem System im Rahmen der Übung KERNEL BLITZ '97 vor der Küste Südkaliforniens (CA) kommuniziert. Erin Telitz arbeitet mit Signalman First Class (EOD / SW) Joel Blea zusammen, während er mit einem Patienten und medizinischen Taucher in einer transportablen Kompressionskammer an Bord der USS DENVER (LPD 9) während einer Systemübung im Rahmen von Exercise KERNEL BLITZ '97 vor der Küste Südkaliforniens (CA) kommuniziert. Die Matrosen sind an die mobile Einheit 3 der US-Marinebasis Coronado, CA, angeschlossen.

CAPE CANAVERAL, Florida - In High Bay 4 des Vehicle Assembly Building im Kennedy Space Center der NASA in Florida wird das Servicemodul / Serviceadapter-Segment des Oberstufensimulators Ares I-X (Vordergrund) auf seinen Umzug in einen Stand vorbereitet. Andere Segmente werden auf dem Boden um ihn herum platziert und gestapelt. Ares I-X ist das Testfahrzeug für den Ares I, der Teil des Konstellationsprogramms ist, um Menschen zum Mond und darüber hinaus zurückzubringen. Die Ares I-X soll im Juli 2009 auf den Markt kommen. Bildnachweis: NASA / Kim Shiflett KSC-2009-2462

Die ursprüngliche Auffindungshilfe beschrieb dieses Foto wie folgt: Betreff Betrieb / Serie: MARKTQUADRAT III Stützpunkt: Pope Air Force Base Staat: North Carolina (NC) Land: Vereinigte Staaten von Amerika (USA) Szenenkameramann: STAFF SGT. Dekan Wagner Veröffentlichungsstatus: Veröffentlicht an die Öffentlichkeit Kombinierte digitale Fotodateien des Militärischen Dienstes

Mitglieder eines Crash / Fire Rescue Squad bringen einen Patienten nach einem simulierten Hubschrauberabsturz von einem CH-53 Sea Stallion Helikopter weg. Die Kader-Mitglieder tragen Trainingsanzüge

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: JAMES WEBB SPACE TELESCOPE (JWST) HELIUM SHROUD AT GODDARD SPACE FLIGHT CENTER Fotograf: DEBBIE McCALLUM Datum: 14.05.2009 Arbeitsnummer: 2009-01790-0 Konservierungskopie:.tif 2009

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Das NASA-Raumschiff Lunar Reconnaissance Orbiter (LRO) ACOUSTIC CHAMBER Fotograf: DEBBIE MCCALLUM Datum: 30.7.2008 Arbeitsnummer: 2008-00590-4 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: PAT IZZO Datum: 06.12.2008 Arbeitsnummer: 2008-00590-14 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Das NASA-Raumschiff Lunar Reconnaissance Orbiter (LRO) ACOUSTIC CHAMBER Fotograf: DEBBIE MCCALLUM Datum: 30.7.2008 Arbeitsnummer: 2008-00590-4 Konservierungskopie:.tif 2008

Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: Das NASA-Raumschiff Lunar Reconnaissance Orbiter (LRO) ACOUSTIC CHAMBER Fotograf: DEBBIE MCCALLUM Datum: 30.7.2008 Arbeitsnummer: 2008-00590-4 Konservierungskopie:.tif 2008

Themen

NASA Mond- Aufklärung Orbiter Mondaufklärungsorbiter lro Raumfahrzeug Bewegung Raumschiff bewegen Stimmung Kammer Mondoberfläche Mondlandung hohe Auflösung ultrahohe Auflösung Vibe-Kammer debbie mccallum Auftragsnummer Erhaltungskopie Weltraumprogramm