Similar
A Cochrane loader is used to unload a KC-10A Extender during Exercise BRIM FROST '85
KENNEDY SPACE CENTER, FLA. - The transporter rolls out of Port Canaveral with the Pressurized Module of the Japanese Experiment Module (JEM) aboard. The National Space Development Agency of Japan (NASDA) developed the laboratory at the Tsukuba Space Center near Tokyo. The Pressurized Module is the first element of the JEM, named "Kibo" (Hope), to be delivered to KSC, and will be transferred to KSC’s Space Station Processing Facility. The JEM is Japan's primary contribution to the Station. It will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments. The JEM also includes an exposed facility (platform) for space environment experiments, a robotic manipulator system, and two logistics modules. The various JEM components will be assembled in space over the course of three Shuttle missions.
CAPE CANAVERAL, Fla. – A second shipping container of major flight hardware for space shuttle Atlantis' STS-125 mission to NASA's Hubble Space Telescope is moved into the airlock at the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center. The container holds the Super Lightweight Interchangeable Carrier, or SLIC, and the Orbital Replacement Unit Carrier, or ORUC. In the facility, preparations will begin for its targeted October launch. The payload carriers will be prepared for the integration of telescope science instruments, both internal and external replacement components, as well as the flight support equipment to be used by the astronauts during the servicing mission. The three payload carriers or pallets are the Flight Support System, the SLIC and the ORUC. At the end of July, a fourth and final carrier, the Multi-Use Lightweight Equipment carrier will join the others in the Payload Hazardous Servicing Facility where the Hubble payload is being prepared for launch. Photo credit: NASA/Amanda Diller KSC-08pd2023
CAPE CANAVERAL, Fla. – A trailer hauls boxes and equipment from the 50-year-old Mission Control Center on the Cape Canaveral Air Force Station in Florida. Out of use for many years, and with no valid operational or other use for the facility, NASA plans to demolish the site. The facility once controlled all manned Mercury space flights and the first two unmanned Gemini flights from May 1961-1963. It provided launch, orbital, re-entry and landing control for the flights. That function was later transferred to NASA's Johnson Space Center in Houston. Photo credit: NASA/Jack Pfaller KSC-2009-2877
Orion Crew Module Structural Test Article Transport from SLF to
STS086-302-028 - STS-086 - Interior views of the Spacehab module after transfer ops
CAPE CANAVERAL, Fla. – Trucks head into the Vehicle Assembly Building's high bay 4 at NASA's Kennedy Space Center in Florida. They carry Ares I-X upper stage simulator segments that arrived Nov. 4 at Port Canaveral, Fla., aboard the Delta Mariner. The upper stage simulators will be used in the test flight identified as Ares I-X in 2009. The Ares I-X test flight will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with the Ares I crew launch vehicle. It also will allow NASA to gather critical data during ascent of the integrated Orion crew exploration vehicle and the Ares I rocket. The data will ensure the entire vehicle system is safe and fully operational before astronauts begin traveling to orbit. The simulator segments will simulate the mass and the outer mold line and will be more than 100 feet of the total vehicle height of 327 feet. The simulator comprises 11 segments that are approximately 18 feet in diameter. Most of the segments will be approximately 10 feet high, ranging in weight from 18,000 to 60,000 pounds, for a total of approximately 450,000 pounds. Photo credit: NASA/Cory Huston KSC-08pd3524
VANDENBERG AIR FORCE BASE, Calif. -- Outside the Astrotech payload processing facility on Vandenberg Air Force Base in California, workers clean the shipping container of NASA's Wide-field Infrared Survey Explorer, or WISE, spacecraft before moving it inside. The satellite will survey the entire sky at infrared wavelengths, creating a cosmic clearinghouse of hundreds of millions of objects, which will be catalogued, providing a vast storehouse of knowledge about the solar system, the Milky Way, and the universe. Launch is scheduled no earlier than Dec. 10. Photo credit: NASA/VAFB KSC-2009-4730
CAPE CANAVERAL, Fla. – Workers secure the high-fidelity space shuttle model to the structure that will cradle the model on its journey from NASA’s Kennedy Space Center in Florida to Johnson Space Center's visitor center in Houston atop a barge. The model was built in Apopka, Fla., by Guard-Lee and installed at Kennedy Space Center Visitor Complex in 1993.The model has been parked at the turn basin the past five months to allow the Kennedy Space Center Visitor Complex to begin building a new facility next year to display space shuttle Atlantis in 2013. For more information about Johnson’s visitor center, called Space Center Houston, visit http://www.spacecenter.org. Photo credit: NASA/Amanda Diller KSC-2012-2965
Related
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Zusammenfassung
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt:
Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Fotograf: DEBBIE McCALLUM
Datum: 2 / 10 / 2009
Arbeitsnummer: 2009-00368-3
Konservierungskopie:.tif
2009
Nichts gefunden.
Tags
NASA
Mond-
Aufklärung
Orbiter
Mondaufklärungsorbiter
lro
Raumfahrzeug
gott
Mondoberfläche
Mondlandung
Raumfahrtzentrum
hohe Auflösung
ultrahohe Auflösung
Goddard Raumfahrtzentrum
debbie mccallum
Auftragsnummer
Erhaltungskopie
Weltraumprogramm
Datum
2006 - 2011
Quelle
The U.S. National Archives
Link
Copyright-info
No known copyright restrictions