Similar
KENNEDY SPACE CENTER, FLA. -- At Launch Pad 39A, members of the space shuttle Atlantis STS-122 crew view the Columbus module during terminal countdown demonstration test, or TCDT, activities. Columbus was installed in the orbiter's payload bay on Nov. 11. From left, in clean room attire, are former astronaut Jerry Ross, chief of the Vehicle Integration Test Office at NASA Johnson Space Center, Pilot Alan Poindexter and Commander Steve Frick. The TCDT provides astronauts and ground crews with equipment familiarization, emergency egress training and a simulated launch countdown. On mission STS-122, Atlantis will deliver the Columbus module to the International Space Station. The European Space Agency's largest single contribution to the station, Columbus is a multifunctional, pressurized laboratory that will be permanently attached to U.S. Node 2, called Harmony. The module is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. The laboratory will expand the research facilities aboard the station, providing crew members and scientists from around the world the ability to conduct a variety of experiments in the physical, materials and life sciences. Launch is targeted for Dec. 6. Photo credit: NASA/Kim Shiflett KSC-07pd3354
CAPE CANAVERAL, Fla. - In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, STS-127 crew members get a close look at equipment for their mission, which will install final components of the Japanese Aerospace Exploration Agency’s Japanese Experiment Module. Equipment familiarization is part of a Crew Equipment Interface Test. The JEM components include the Inter Orbit Communication System Extended Facility, or ICS-EF, the Extended Facility and Experiment Logistics Module-Exposed Section. The payload will launch aboard space shuttle Endeavour targeted for May 15, 2009. Photo credit: NASA/Kim Shiflett KSC-08pd3002
Under Secretary of the Army Joseph W. Westphal tries
VANDENBERG AIR FORCE BASE, Calif. -- At the Astrotech processing facility on Vandenberg Air Force Base in California, workers prepare a payload adapter ring for NASA's Wide-field Infrared Survey Explorer, or WISE, in preparation for mating to its Payload Attach Fitting. The satellite will survey the entire sky at infrared wavelengths, creating a cosmic clearinghouse of hundreds of millions of objects which will be catalogued and provide a vast storehouse of knowledge about the solar system, the Milky Way, and the universe. Launch is scheduled for Dec. 7. Photo credit: NASA/Doug Kolkow KSC-2009-5387
MUSEUM DESIGNERS TOUR OF GODDARD SPACE FLIGHT CENTER
KENNEDY SPACE CENTER, FLA. -- Workers take inventory of the contents of the Multi-Purpose Logistics Module Leonardo, which is in the Space Station Processing Facility. The MPLM has just returned from its maiden voyage to the International Space Station aboard Discovery on mission STS-102. It has brought back to KSC nearly a ton of trash and excess equipment from the Space Station. Leonardo is one of three MPLMs built by the Italian Space Agency to serve as “cargo vans” to the Station, carrying supplies and equipment. In the SSPF, Leonardo will be prepared for a future mission KSC01pp0728
CAPE CANAVERAL, Fla. – In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, members of the STS-127 Mission Specialists Chris Cassidy and Tom Marshburn review options of how they will stow the excess thermal blankets on the Japanese Experiment Module's Experiment Logistics Module-Exposed Section, or ELM-ES, after they remove them on-orbit. The crew members are at Kennedy for Crew Equipment Interface Test activities, or CEIT, which provides experience handling tools, equipment and hardware for the mission. The payload will be launched to the International Space Station aboard space shuttle Endeavour on the STS-127 mission, targeted for launch on May 15. Photo credit: NASA/Dimitrios Gerondidakis KSC-2009-1135
CAPE CANAVERAL, Fla. – Technicians work with the Orion spacecraft being assembled by Lockheed Martin inside the Operations & Checkout Building's high bay at NASA's Kennedy Space Center. The spacecraft is being prepared for a test flight next year that calls for the Orion to fly without a crew on a mission to evaluate its systems and heat shield. The spacecraft is designed to carry astronauts into deep space and back safely. Photo credit: NASA/Charisse Nahsser KSC-2013-3460
CAPE CANAVERAL, Fla. – In Orbiter Processing Facility 2 at NASA's Kennedy Space Center, STS-126 Mission Specialist Shane Kimbrough gets a closer look at hardware inside space shuttle Endeavour's payload bay. Members of space shuttle Endeavour's STS-126 crew are at Kennedy to participate in a crew equipment interface test, or CEIT. The CEIT provides experience handling tools, equipment and hardware they will use on the mission. Endeavour will deliver a multi-purpose logistics module to the International Space Station on the STS-126 mission. Launch is targeted for Nov. 10. Photo credit: NASA/Kim Shiflett KSC-08pd2257
Related
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.jpg 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: DEBBIE McCALLUM Datum: 2 / 10 / 2009 Arbeitsnummer: 2009-00368-3 Konservierungskopie:.tif 2009
Die ursprüngliche Auffindungshilfe beschrieb dies wie folgt: Beschreibung: NASA-Sonde Lunar Reconnaissance Orbiter (LRO) am Goddard Space Flight Center Fotograf: PAT IZZO Datum: 12: 00: 00 Uhr Arbeitsnummer: 2008-00590-13 Konservierungskopie:.tif 2008
Zusammenfassung
NASA-Raumsonde Lunar Reconnaissance Orbiter (LRO)
Nichts gefunden.
Tags
NASA
Mond-
Aufklärung
Orbiter
Mondaufklärungsorbiter
lro
Raumfahrzeug
Mondoberfläche
Mondlandung
hohe Auflösung
Goddard Raumfahrtzentrum
pat izzo
Auftragsnummer
Erhaltungskopie
Weltraumprogramm
Datum
2006 - 2011
Quelle
The U.S. National Archives
Link
Copyright-info
No known copyright restrictions