71 Eps Image: PICRYL - Public Domain Media Search Engine Public Domain Search}

Van Eps - Glass negative photogrpah. Public domain.

Public domain historical photo, free to use, no copyright restrictions image - Picryl description

Van Eps - Glass negative photogrpah. Public domain.

Public domain photograph of musician playing music, musical instrument, free to use, no copyright restrictions image - Picryl description

Poster, 'Volunteer For National Service'

Public domain vintage photo from New Zealand archive, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

EPS Reception - U.S. National Archives Public Domain photograph

Carter White House Photographs: Presidential Public domain photograph - White house, President of the United States, free to use, no copyright restrictions image - Picryl description

A view of four AN/EPS-50 early warning radar antennas located at the Ballistic Missile Early Warning System site. An antenna dome is visible to the far right

The original finding aid described this photograph as: Base: Thule Air Base Country: Greenland (GRL) Scene Camera Operator: MSGT Glen D. Plummer Release Status: Released to Public Combined Military Service More

One of four AN/EPS-50 early warning radar antennas located at the airbase

The original finding aid described this photograph as: Base: Thule Air Base Country: Greenland (GRL) Scene Camera Operator: MSGT Glen D. Plummer Release Status: Released to Public Combined Military Service More

During HARVEST BARE, members of the 4449th Mobility Support Squadron demonstrate the building of an expandable personnel shelter (EPS) to members of the 24th Civil Engineering Squadron. Over a hundred will be built as part of the deployment to relieve overcrowding due to President Bush's decision to move all US forces either on base or back to the United States

The original finding aid described this photograph as: Subject Operation/Series: HARVEST BARE Base: Howard Air Force Base Country: Panama (PAN) Scene Camera Operator: STAFF Sergeant Russ Pollanen Release S More

During HARVEST BARE, members of the 4449th Mobility Support Squadron demonstrate the building of an expandable personnel shelter (EPS) to members of the 24th Civil Engineering Squadron. Over a hundred will be built as part of the deployment to relieve overcrowding due to President Bush's decision to move all US forces either on base or back to the United States

The original finding aid described this photograph as: Subject Operation/Series: HARVEST BARE Base: Howard Air Force Base Country: Panama (PAN) Scene Camera Operator: STAFF Sergeant Russ Pollanen Release S More

During HARVEST BARE, members of the 4449th Mobility Support Squadron instruct members of the 24th Civil Engineering Squadron on the building of an expandable personnel shelter (EPS). Over a hundred are being built as part of the deployment to relieve overcrowding due to President Bush's decision to move all US forces either on base or back to the United States

The original finding aid described this photograph as: Subject Operation/Series: HARVEST BARE Base: Howard Air Force Base Country: Panama (PAN) Scene Camera Operator: STAFF Sergeant Russ Pollanen Release S More

During HARVEST BARE, members of the 4449th Mobility Support Squadron demonstrate the building of an expandable personnel shelter (EPS) to members of the 24th Civil Engineering Squadron. Over a hundred will be built as part of the deployment to relieve overcrowding due to President Bush's decision to move all US forces either on base or back to the United States

The original finding aid described this photograph as: Subject Operation/Series: HARVEST BARE Base: Howard Air Force Base Country: Panama (PAN) Scene Camera Operator: STAFF Sergeant Russ Pollanen Release S More

During HARVEST BARE, members of the 4449th Mobility Support Squadron demonstrate the building of an expandable personnel shelter (EPS) to members of the 24th Civil Engineering Squadron. Over a hundred will be built as part of the deployment to relieve overcrowding due to President Bush's decision to move all US forces either on base or back to the United States

The original finding aid described this photograph as: Subject Operation/Series: HARVEST BARE Base: Howard Air Force Base Country: Panama (PAN) Scene Camera Operator: STAFF Sergeant Russ Pollanen Release S More

Eye Protective System 21 (EPS-21) advanced goggles were displayed during Modern Day Marine Corps Exposition '97. Mr. Richard Long of GENTEX Corporation demonstrates the proper wear of the EPS-21 goggles. Mr. Long is also demonstrating a bulletproof helmet active stereo ear defender electronics assembly

The original finding aid described this photograph as: Base: Marine Corps Base, Quantico State: Virginia (VA) Country: United States Of America (USA) Scene Camera Operator: SGT. Keith A. Stevenson Release More

In the Space Station Processing Facility, Solar Array Wing-3 (at top), a component of the International Space Station, hovers above the Integrated Electronic Assembly where it will be installed for testing. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1195

In the Space Station Processing Facility, Solar Array Wing-3 (at top), a component of the International Space Station, hovers above the Integrated Electronic Assembly where it will be installed for testing. The More

In the Space Station Processing Facility, Solar Array Wing-3, a component of the International Space Station, is installed in the Integrated Electronic Assembly where it will be tested. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1198

In the Space Station Processing Facility, Solar Array Wing-3, a component of the International Space Station, is installed in the Integrated Electronic Assembly where it will be tested. The solar array is sched More

Workers in the Space Station Processing Facility get ready to move Solar Array Wing-3, a component of the International Space Station, for installation onto the Integrated Electronic Assembly. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1193

Workers in the Space Station Processing Facility get ready to move Solar Array Wing-3, a component of the International Space Station, for installation onto the Integrated Electronic Assembly. The solar array i More

Workers in the Space Station Processing Facility watch closely as Solar Array Wing-3, a component of the International Space Station, is lowered toward the Integrated Electronic Assembly where it will be installed for testing. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1196

Workers in the Space Station Processing Facility watch closely as Solar Array Wing-3, a component of the International Space Station, is lowered toward the Integrated Electronic Assembly where it will be instal More

In the Space Station Processing Facility, Solar Array Wing-3, an element of the International Space Station, is lifted from a work stand to move it to the Integrated Electronic Assembly for testing. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1194

In the Space Station Processing Facility, Solar Array Wing-3, an element of the International Space Station, is lifted from a work stand to move it to the Integrated Electronic Assembly for testing. The solar a More

In the Space Station Processing Facility, Solar Array Wing-3, a component of the International Space Station, is installed in the Integrated Electronic Assembly where it will be tested. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1199

In the Space Station Processing Facility, Solar Array Wing-3, a component of the International Space Station, is installed in the Integrated Electronic Assembly where it will be tested. The solar array is sched More

Workers in the Space Station Processing Facility watch closely as Solar Array Wing-3, a component of the International Space Station, is moved toward the Integrated Electronic Assembly where it will be installed for testing. The solar array is scheduled to be launched on STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1197

Workers in the Space Station Processing Facility watch closely as Solar Array Wing-3, a component of the International Space Station, is moved toward the Integrated Electronic Assembly where it will be installe More

A solar array is nearly in place on the Integrated Equipment Assembly, next to Solar Array Wing-3, which is already installed. Components of the International Space Station, the arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1219

A solar array is nearly in place on the Integrated Equipment Assembly, next to Solar Array Wing-3, which is already installed. Components of the International Space Station, the arrays are scheduled to be launc More

Workers in the Space Station Processing Facility prepare an overhead crane they will use to move a solar array, a component of the International Space Station, for installation onto the Integrated Equipment Assembly. The solar array is the second one being installed. They are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1209

Workers in the Space Station Processing Facility prepare an overhead crane they will use to move a solar array, a component of the International Space Station, for installation onto the Integrated Equipment Ass More

Workers in the Space Station Processing Facility give close attention to the placement of a solar array on the Integrated Equipment Assembly. Solar Array Wing-3 is already in place. Components of the International Space Station, the arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1218

Workers in the Space Station Processing Facility give close attention to the placement of a solar array on the Integrated Equipment Assembly. Solar Array Wing-3 is already in place. Components of the Internatio More

In the Space Station Processing Facility, the overhead crane carrying a solar array arrives at the Integrated Equipment Assembly (IEA) on which it will be installed. Solar Array Wing-3 is already in place. Components of the International Space Station, the arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1215

In the Space Station Processing Facility, the overhead crane carrying a solar array arrives at the Integrated Equipment Assembly (IEA) on which it will be installed. Solar Array Wing-3 is already in place. Comp More

In the Space Station Processing Facility, the overhead crane carrying a solar array maneuvers its cargo into position on the Integrated Equipment Assembly on which it will be installed. Solar Array Wing-3 is already in place. Components of the International Space Station, the arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1216

In the Space Station Processing Facility, the overhead crane carrying a solar array maneuvers its cargo into position on the Integrated Equipment Assembly on which it will be installed. Solar Array Wing-3 is al More

The overhead crane carrying a solar array turns on its axis to move the array to the Integrated Equipment Assembly (IEA) for installation. A component of the International Space Station, the solar array is the second one being installed on the IEA. The arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1214

The overhead crane carrying a solar array turns on its axis to move the array to the Integrated Equipment Assembly (IEA) for installation. A component of the International Space Station, the solar array is the More

Workers in the Space Station Processing Facility help guide an overhead crane toward a workstand containing a solar array in order to move it for installation onto the Integrated Equipment Assembly (IEA). A component of the International Space Station, the solar array is the second one being installed on the IEA. The arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1210

Workers in the Space Station Processing Facility help guide an overhead crane toward a workstand containing a solar array in order to move it for installation onto the Integrated Equipment Assembly (IEA). A com More

An overhead crane in the Space Station Processing Facility lifts a solar array as workers stand by to help guide it. The solar array will be installed onto the Integrated Equipment Assembly (IEA). A component of the International Space Station, the solar array is the second one being installed on the IEA. The arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1213

An overhead crane in the Space Station Processing Facility lifts a solar array as workers stand by to help guide it. The solar array will be installed onto the Integrated Equipment Assembly (IEA). A component o More

Workers rise to the occasion on accordion lifts as they oversee the movement of solar array in front of them. The solar array will be installed onto the Integrated Equipment Assembly (IEA). A component of the International Space Station, the solar array is the second one being installed on the IEA. The arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1212

Workers rise to the occasion on accordion lifts as they oversee the movement of solar array in front of them. The solar array will be installed onto the Integrated Equipment Assembly (IEA). A component of the I More

In the Space Station Processing Facility, workers help guide a solar array into position for installation on the Integrated Equipment Assembly. Solar Array Wing-3 is already in place. Components of the International Space Station, the arrays are scheduled to be launched on mission STS-97 in late November along with the P6 truss. The Station’s electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Each of the eight solar arrays will be 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery. Once in orbit, astronauts will deploy the blankets to their full size. Gimbals will be used to rotate the arrays so that they will face the Sun to provide maximum power to the Space Station KSC-00pp1217

In the Space Station Processing Facility, workers help guide a solar array into position for installation on the Integrated Equipment Assembly. Solar Array Wing-3 is already in place. Components of the Internat More

KENNEDY SPACE CENTER, FLA. - Technicians attach a crane to the Pump Flow Control Subsystem (PFCS) in the Space Station Processing Facility. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1477

KENNEDY SPACE CENTER, FLA. - Technicians attach a crane to the Pump Flow Control Subsystem (PFCS) in the Space Station Processing Facility. The PFCS pumps and controls the liquid ammonia used to cool the vario More

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians position the Pump Flow Control Subsystem (PFCS) over the upper deck of the S6 Truss. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1480

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians position the Pump Flow Control Subsystem (PFCS) over the upper deck of the More

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists technicians install the Pump Flow Control Subsystem (PFCS) onto the upper deck of the S6 Truss. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1482

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists technicians install the Pump Flow Control Subsystem (PFCS) onto the upper deck of the S6 Truss. Th More

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists a technician check out the Pump Flow Control Subsystem (PFCS) before it is installed on the upper deck of the S6 Truss. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. The solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1478

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (left) assists a technician check out the Pump Flow Control Subsystem (PFCS) before it is installed on the upper d More

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians lower the Pump Flow Control Subsystem (PFCS) into position onto the upper deck of the S6 Truss. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1481

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, astronaut Tracy Caldwell (second from left) assists technicians lower the Pump Flow Control Subsystem (PFCS) into position onto the upper d More

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, a technician steadies the Pump Flow Control Subsystem (PFCS) as it is lifted and moved toward the S6 Truss. The PFCS pumps and controls the liquid ammonia used to cool the various Orbital Replacement Units on the Integrated Equipment Assembly that make up the S6 Photo-Voltaic Power Module on the International Space Station (ISS). The fourth starboard truss segment, the S6 Truss measures 112 feet long by 39 feet wide. Its solar arrays are mounted on a “blanket” that can be folded like an accordion for delivery to the ISS. Once in orbit, astronauts will deploy the blankets to their full size. When completed, the Station's electrical power system (EPS) will use eight photovoltaic solar arrays to convert sunlight to electricity. Delivery of the S6 Truss, the last power module truss segment, is targeted for mission STS-119. KSC-04pd1479

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, a technician steadies the Pump Flow Control Subsystem (PFCS) as it is lifted and moved toward the S6 Truss. The PFCS pumps and controls th More

S124E006530 - STS-124 - JPM - location of EPS1 rack

The original finding aid described this as: Description: View of EPS1 (Electrical Power Systems 1) rack at location code JPM1_D2 in the Japanese Experiment Module (JEM) Pressurized Module (JPM) as documented More

S123E008659 - STS-123 - JPM D2 - EPS 1

The original finding aid described this as: Description: View of JPM D2 - Electrical Power System 1 (EPS 1). Photo was taken during STS-123 / Expedition 16 joint operations. Subject Terms: STS-123, Expeditio More

S124E006531 - STS-124 - JPM - location of EPS1 rack

The original finding aid described this as: Description: View of EPS1 (Electrical Power Systems 1) rack at location code JPM1_D2 in the Japanese Experiment Module (JEM) Pressurized Module (JPM) as documented More

S123E007146 - STS-123 - JPM1D2 EPS1 rack in the JLP during Expedition 16 / STS-123 Joint Operations

The original finding aid described this as: Description: JPM1 D2 EPS1 rack in the Japanese Experiment Logistics Module - Pressurized Module (JLP). Photo was taken during Expedition 16 / STS-123 joint operatio More

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e214982

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e214998

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e215002

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e214997

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e215027

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e214983

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e214995

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett jsc2012e215020

DATE: 9-11-12 LOCATION: Bldg. 5 - SSTF High Bay SUBJECT: Expedition 36/37 crew (Yurchikhin, Nyberg and Parmitano) along with Exp. 37/38’s Michael Hopkins during EPS Major Case Training. PHOTOGRAPHER: Lauren Harnett

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair jsc2013e099006

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair jsc2013e099007

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair

Expedition 40 crew members during EPS MAJOR CASE B training

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair jsc2013e099000

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair jsc2013e099001

Date: 12-06-13 Location: Bldg 5, SSTF Subject: Expedition 40 crew members Steve Swanson, Greg Wiseman and Alexander Gerst during EPS MAJOR CASE B training in SSTF with instructor Jessica Newman Photographer: James Blair