205 Centrifuge Image: PICRYL - Public Domain Media Search Engine Public Domain Search}

Tvättomat, 13 juli 1965 Sverige. Public domain image.

Tvättomat, 13 juli 1965 Public domain photograph, 1900s Sweden, free to use, no copyright restrictions image - Picryl description.

Tvättomat, 13 juli 1965 Sverige. Public domain image.

Tvättomat, 13 juli 1965 Public domain photograph, 1900s Sweden, free to use, no copyright restrictions image - Picryl description.

Frövi rep 1 19 november Sverige. Public domain image.

Frövi rep 1 19 november Public domain photograph, 1900s Sweden, free to use, no copyright restrictions image - Picryl description.

Tvättomat, 13 juli 1965 Sverige. Public domain image.

Tvättomat, 13 juli 1965 Public domain photograph, 1900s Sweden, free to use, no copyright restrictions image - Picryl description.

Tobaksmonopolet med porslinsfabriken i bakgrunden.

Tobaksmonopolet med porslinsfabriken i bakgrunden. Public domain historical portrait photograph, Scandinavian, free to use, no copyright restrictions image - Picryl description

Aktiebolaget Nordisk Silkecellulosa. Torkning av ullen i centrifug.

A milk tester for the Triple B milk testing associations. His equipment includes test tubes, pipettes, a centrifuge and laboratory apparatus seldom found on the farm. Black Hawk County, Iowa

Public domain photograph of laboratory, free to use, no copyright restrictions image - Picryl description

Removing samples of cream from centrifuge used in Babcock test for butterfat. Dairymen's Cooperative Creamery. Caldwell, Canyon County, Idaho

Public domain photograph of 1930s industry, war production in the United States free to use, no copyright restrictions image - Picryl description

Salinas, California. Treated and rinsed guayule seed is placed in centrifuge

Picryl description: Public domain image of a factory worker, plant, manufacture, assembly line, industrial facility, early 20th-century industrial architecture, free to use, no copyright restrictions. show less

Salinas, California. Placing treated and rinsed guayule seed in centrifuge

Public domain photograph of California in 1930s, free to use, no copyright restrictions image - Picryl description

Tobaksmonopolet, Gävle. Foto i januari 1944.

Copper collector rings of the ionic centrifuge, in storage at 2063 Addison Street, Berkeley. Photograph taken November 27, 1945

Digital Preservation File Name and Format: 434-LB-5-XBD201207-00371.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Tank of Dr. Joseph Slepian's ionic centrifuge in storage at 2063 Addison Street, Berkeley. Photograph taken November 27, 1945

Digital Preservation File Name and Format: 434-LB-5-XBD201207-00373.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Tank of Dr. Joseph Slepian's ionic centrifuge in storage at 2063 Addison Street, Berkeley. Photograph taken November 27, 1945

Digital Preservation File Name and Format: 434-LB-5-XBD201207-00372.TIF Photographs Documenting Scientists, Special Events, and Nuclear Research Facilities, Instruments, and Projects at the Berkeley Lab

Photograph of John H. Glenn, Jr. during Centrifuge Testing

Original caption: This photograph of John H, Glenn, Jr., 39, was taken during centrifuge testing at the U.S. Navy installation at Johnsville, Pennsylvania. Glenn is one of three National Aeronautics and Space More

Photograph of John H. Glenn, Jr. prior to Undergoing Centrifuge Tests

Original caption: John H. Glenn, Jr., 39, relaxes in the suit room prior to undergoing centrifuge tests which subjected him to G forces similar to those he might undergo in being placed into an orbital flight. More

Photograph of Virgil L. Grissom Preparing for Centrifuge Tests

Original caption: Astronaut Virgil I. Grissom, 35, prepares for centrifuge tests at the U.S. Navy's center at Johnsville, Pennsylvania during April of this year. These tests were conducted to determine the rea More

Astronaut Virgil Grissom - Training Prep - Centrifuge - Johnsonville, PA

B59-00586 (1959) --- Astronaut Virgil (Gus) Grissom is seen preparing for training in the centrifuge at Johnsville. A Navy corpsman attaches sensors to Grissom to monitor his body's reaction to the centrifuge. More

Astronaut Scott Carpenter during centrifuge training

B59-00570 (August 1959) --- Astronaut Scott Carpenter trains at the centrifuge procedures trainer at Wright Field, Johnsville, Pennsylvania, for project Mercury. Photo credit: NASA

Personnel - Astronaut Scott Carpenter - Centrifuge

B59-00723 (1959) --- Close-up of astronaut M. Scott Carpenter, prime pilot for the Mercury-Atlas 7 (MA-7) mission, during centrifuge training. (M-199) Photo credit: NASA

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin More

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connecting modules, Node 2 attaches to the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. Node 2 is the designated payload for mission STS-120. No orbiter or launch date has been determined yet.

KENNEDY SPACE CENTER, FLA. - The Italian-built module, U.S. Node 2, for the International Space Station is offloaded from a Beluga aircraft at the Shuttle Landing Facility. The second of three Station connectin More

SCHIRRA, WALTER, JR., ASTRONAUT - TRAINING - CENTRIFUGE - PA

G60-02461 (1960) --- Astronaut Walter M. Schirra Jr. prepares to enter gondola of centrifuge which is used to test gravitational stress on astronauts training for spaceflight. Schirra became the pilot of the Me More

Photograph of Astronaut Virgil I. Grissom Preparing for Testing in the Centrifuge

Original caption: Being readied for testing in the U.S. Navy's centrifuge at Johnsville, Pennsylvania is Virgil I. Grissom, 35, one of three astronauts chosen for the first manned suborbital flight of Project M More

Ames 5 Degrees-of-Motion Simulator

(June 6, 1962) The NASA Ames 5 degrees-of-freedom motion simulator. This simulator incorporated a centrifuge with a 30 foot spin radius. The simulated cockpit located within the hooded cab at the end of the cen More

Ames 5 degrees-of-freedom motion simulator: This simulator incorporated a centrifuge of 30ft radius. The simulatored cockpit, located intn a hooded cab at the end of the centrifuge arm, was driven by motors, as required by the simulation, about each of its three axes (itch, roll, and yaw). The cab was also driven through a limited range of motion along the vertical axis and of course was driven by the centrifuge arm along a curved path of fixed radius in the horizontal plane. Thus the motions that could be simulated i the cab were three angular motions, one translational motion, and a curvilinear combination of the remaining two translational motions. The curvilinear motions, and associated accelerations, were, of course, fairly representative of airplane flight. The simulator was placed in operation early in 1961. ref: Adventures in Research (pg 341/341) NASA SP-4302 ARC-1962-A-29323

Ames 5 degrees-of-freedom motion simulator: This simulator incorporated a centrifuge of 30ft radius. The simulatored cockpit, located intn a hooded cab at the end of the centrifuge arm, was driven by motors, as More

Frövi rep 1 19 november Sverige. Public domain image.

Frövi rep 1 19 november Public domain photograph of carpet, free to use, no copyright restrictions image - Picryl description

50ft. Low 'G' Centrifuge N-239A (Dr Jiro Oyama and & B Daligcon (r) can be seen through window into control room ARC-1968-A-41649

50ft. Low 'G' Centrifuge N-239A (Dr Jiro Oyama and & B Daligcon (r) can be seen through window into control room

Apollo 8 Prime Crew - Gondola for Centrifuge Training - MSC

S68-53187 (1 Nov. 1968) --- The prime crew of the Apollo 8 lunar orbit mission stands beside the gondola in Building 29 after suiting up for centrifuge training in the Manned Spacecraft Center's (MSC) Flight Ac More

Apollo 8 prime crew inside centrifuge gondola in bldg 29 during training

S68-53194 (1 Nov. 1968) --- The Apollo 8 prime crew inside the centrifuge gondola in Building 29 during centrifuge training in MSC's Flight Acceleration Facility. (View with crew lying on back) Left to right ar More

Crew Training - Apollo 8 (Centrifuge) - MSC

S68-53186 (1 Nov. 1968) --- Astronaut Frank Borman, Apollo 8 commander, egresses the gondola in Building 29 after centrifuge training in the Manned Spacecraft Center's (MSC) Flight Acceleration Facility (FAF).

Crew Training - Apollo 8 (Centrifuge) - MSC

S68-53283 (1 Nov. 1968) --- The Apollo 8 prime crew is seen inside the gondola during centrifuge training in MSC's Flight Acceleration Facility, Building 29. Left to right, are astronauts William A. Anders, lun More

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. The accelerations and rates are intended to be smoothly applicable at very low value so the navigation and guidance procedures using a high-accuracy, out-the window display may be simulated. Configuration 2: The simulator can use a one-man cab for human tolerance studies and performance testing. Atmosphere and tempertaure can be varied as stress inducements. This simlator is operated closed-loop with digital or analog computation. It is currently man-rated for 3.5g maximum. ARC-1971-AC71-6486

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. T More

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. The accelerations and rates are intended to be smoothly applicable at very low value so the navigation and guidance procedures using a high-accuracy, out-the window display may be simulated. Configuration 2: The simulator can use a one-man cab for human tolerance studies and performance testing. Atmosphere and tempertaure can be varied as stress inducements. This simlator is operated closed-loop with digital or analog computation. It is currently man-rated for 3.5g maximum. ARC-1971-AC71-6488

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. T More

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. The accelerations and rates are intended to be smoothly applicable at very low value so the navigation and guidance procedures using a high-accuracy, out-the window display may be simulated. Configuration 2: The simulator can use a one-man cab for human tolerance studies and performance testing. Atmosphere and tempertaure can be varied as stress inducements. This simlator is operated closed-loop with digital or analog computation. It is currently man-rated for 3.5g maximum. ARC-1971-AC71-6490

N-243 Flight and Guidance Centrifuge: Is used for spacecraft mission simulations and is adaptable to two configurations. Configuration 1: The cab will accommodate a three-man crew for space mission research. T More

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility work on a Multi-Element Integrated Test (MEIT) of the U.S. Node 2 and the Japanese Experiment Module (JEM). Node 2 attaches to the end of the U.S. Lab on the ISS and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, eventually, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS. The JEM, developed by the National Space Development Agency of Japan (NASDA), is Japan's primary contribution to the Station. It will enhance the unique research capabilities of the orbiting complex by providing an additional environment for astronauts to conduct science experiments.

KENNEDY SPACE CENTER, FLA. - Technicians in the Space Station Processing Facility work on a Multi-Element Integrated Test (MEIT) of the U.S. Node 2 and the Japanese Experiment Module (JEM). Node 2 attaches More

KENNEDY SPACE CENTER, FLA. - A view of the Space Station Processing Facility shows workstands and ISS elements. The most recent additions are the Japanese Experiment Module (JEM)’s pressurized module and the Italian-built Node 2. The pressurized module is the first element of the JEM, Japan’s primary contribution to the Space Station, to be delivered to KSC. It will enhance the unique research capabilities of the orbiting complex by providing an additional shirt-sleeve environment for astronauts to conduct science experiments. Node 2 will be installed on the end of the U.S. Lab and provides attach locations for the Japanese laboratory, European laboratory, the Centrifuge Accommodation Module and, later, Multipurpose Logistics Modules. It will provide the primary docking location for the Shuttle when a pressurized mating adapter is attached to Node 2. Installation of the module will complete the U.S. Core of the ISS.

KENNEDY SPACE CENTER, FLA. - A view of the Space Station Processing Facility shows workstands and ISS elements. The most recent additions are the Japanese Experiment Module (JEM)’s pressurized module and the More

Conceptual drawing of Turbine Engine Loads Simulator (TELS), a large centrifuge for testing jet engines. Arnold Engineering Development Center

The original finding aid described this photograph as: Country: Unknown Scene Camera Operator: Unknown Release Status: Released to Public Combined Military Service Digital Photographic Files

Wright-Patterson Air Force Base, Area B, Building 55, Centrifuge Building, off Third Street at Northeast corner of Area B, Dayton, Montgomery County, OH

Picryl description: Public domain image of park architecture, palace, chateau, open space, 18th, and 19th-century architecture, free to use, no copyright restrictions.

Space Shuttle Columbia, Centrifuge for SLS-1

S81-25565 (Feb 1981) --- Expected to be a busy item of flight hardware on the Spacelab Life Sciences (SLS-1) mission is this low-gravity centrifuge. To be flown onboard Columbia for STS-40, the centrifuge is More

A Tactical Air Command pilot prepares for a stress test in a centrifuge chamber

The original finding aid described this photograph as: Base: Brooks Air Force Base State: Texas (TX) Country: United States Of America (USA) Scene Camera Operator: SSGT. James P. Jones Release Status: Rele More