visibility Similar

code Related

Production. Aircraft. An aluminum casting, placed on an X-ray film-holder, ready to be photographed in the test laboratory of a big Western aircraft plant. The numeral figures being placed on the film are made of lead and will stop the X-ray beam. A clean, sharp number is left on the film for future identification of the part

Production. Aircraft. Setting up aluminum castings for X-ray in a large Western aircraft plant. Each one is numbered and, unless the X-ray film shows it's flawless, the part will go to the salvage scrap heap

Production. Aircraft. Setting up aluminum castings for X-ray in a large Western aircraft plant. Each one is numbered and, unless the X-ray film shows it's flawless, the part will go to the salvage scrap heap

Production. Aircraft. Samples for microscope inspection--a lowly rivet, a screw, an extruded part--prepared by a test engineer in a large Western aircraft plant. Samples are embedded in bakelite, polished to mirror finish, then etched with acid to bring out the grain. A faulty grain structure, as revealed through the microscope, will show up low-grade material or faulty processing methods in the manufacture of the part

Production. Aircraft. Here's one good reason why refrigerator freezing trays and other aluminum gadgets are out for the duration. On trays in the background are hundreds of aluminum castings going into Lockheed bombers and fighters. Every prime casting is "explored" in a huge X-ray camera like the one seen here. On X-ray film, flaws that might cause failure of these vital parts show up plainly to the expert eye, and the part is discarded

Production. Aircraft. Here's one good reason why refrigerator freezing trays and other aluminum gadgets are out for the duration. On trays in the background are hundreds of aluminum castings going into Lockheed bombers and fighters. Every prime casting is "explored" in a huge X-ray camera like the one seen here. On X-ray film, flaws that might cause failure of these vital parts show up plainly to the expert eye, and the part is discarded

Production. Aircraft. Samples for microscope inspection--a lowly rivet, a screw, an extruded part--prepared by a test engineer in a large Western aircraft plant. Samples are embedded in bakelite, polished to mirror finish, then etched with acid to bring out the grain. A faulty grain structure, as revealed through the microscope, will show up low-grade material or faulty processing methods in the manufacture of the part

Production. Airplane manufacture, general. An employee in North American Aviation's sheet metal sub-assembly department at Inglewood, California, uses a emery wheel to smooth out a weld in a plane part. This plant produces the battle-tested B-25 ("Billy Mitchell") bomber, used in General Doolittle's raid on Tokyo, and the P-51 ("Mustang") fighter plane, which was first brought into prominence by the British raid on Dieppe

Production. Aircraft. At the end of a Flying Fortress assembly line, this mechanic in a large Western plant makes a final check on a landing gear hydraulic system. That big round object in the foreground is a rubber tire. Remember?

Production. Aircraft. An aluminum casting, placed on an X-ray film-holder, ready to be photographed in the test laboratory of a big Western aircraft plant. The numeral figures being placed on the film are made of lead and will stop the X-ray beam. A clean, sharp number is left on the film for future identification of the part

description

Summary

Public domain photograph of laboratory, science, research, free to use, no copyright restrictions image - Picryl description

label_outline

Tags

california los angeles county burbank safety film negatives burbank los angeles county calif production aircraft aluminum x ray film holder test laboratory test laboratory western plant western aircraft plant figures film beam x ray beam number future identification future identification part united states history library of congress
date_range

Date

01/01/1942
person

Contributors

Bransby, David, photographer
United States. Office of War Information.
place

Location

Burbank (Los Angeles County, Calif.) ,  34.18083, -118.30889
create

Source

Library of Congress
link

Link

http://www.loc.gov/
copyright

Copyright info

Public Domain

label_outline Explore Test Laboratory, Identification, Burbank Los Angeles County Calif

US Marine (USMC) Wing Support Squadron (MWSS) 373rd Commanding Officer (CO), Lieutenant Colonel (LCOL) Donald W. Zautcke ceremoniously adds the final nails into the supporting beam of the hardback tent living quarters, at Camp Sledd on Ahmed Al Jaber Air Base, Kuwait, in support of Operation ENDURING FREEDOM

[Severe Storms and Tornadoes] Lady Lake, FL, February 13, 2007 -- A FEMA contractor tightens down an aluminum strap to secure this travel trailer sited at the Sunshine Mobile Home Park in Lady Lake. FEMA provides travel trailers as temporary housing to residents that can no longer live in their homes due to disasters. Mark Wolfe/FEMA

DISA BEAM SLPITTING AND COLOR SPLITTING MODULE IN WHOLE

STAFF SGT. Abraham Malit (Right, Hometown: Angeles City, Philippines) and AIRMAN First Class Rick D. Podry (Left, Hometown: Phoenix, Arizona) both Structural Repair and Inspection personnel from the 49th Material Maintenance Group, Holloman Air Force Base, New Mexico construct a banana beam coupling for an aircraft hanger on Azaraq Air Base, Jordan. The hangar will be used for United States Air Force aircraft in the upcoming joint Air Power Expeditionary Force operation with the Royal Jordanian Air Force. An ancillary mission of the Force is to assist US Air Force and other multinational forces operating in Saudi Arabia and other nearby countries patrol the no-fly zone over southern Iraq

Under the goals of the Vision for Space Exploration, Ares I is a chief component of the cost-effective space transportation infrastructure being developed by NASA's Constellation Program. This transportation system will safely and reliably carry human explorers back to the moon, and then onward to Mars and other destinations in the solar system. The Ares I effort includes multiple project element teams at NASA centers and contract organizations around the nation, and is managed by the Exploration Launch Projects Office at NASA's Marshall Space Flight Center (MFSC). ATK Launch Systems near Brigham City, Utah, is the prime contractor for the first stage booster. ATK's subcontractor, United Space Alliance of Houston, is designing, developing and testing the parachutes at its facilities at NASA's Kennedy Space Center in Florida. NASA's Johnson Space Center in Houston hosts the Constellation Program and Orion Crew Capsule Project Office and provides test instrumentation and support personnel. Together, these teams are developing vehicle hardware, evolving proven technologies, and testing components and systems. Their work builds on powerful, reliable space shuttle propulsion elements and nearly a half-century of NASA space flight experience and technological advances. Ares I is an inline, two-stage rocket configuration topped by the Crew Exploration Vehicle, its service module, and a launch abort system. This HD video image depicts friction stir welding used in manufacturing aluminum panels that will fabricate the Ares I upper stage barrel. The aluminum panels are subjected to confidence panel tests during which the bent aluminum is stressed to breaking point and thoroughly examined. The panels are manufactured by AMRO Manufacturing located in El Monte, California. (Highest resolution available) n/a

IN-PROCESS FABRICATION OF A BEAM SHIELD

[Aluminum in France], Marshall plan, post-war reconstruction of Europe

U.S. Army Corps of Engineers Project Manager Steve

U.S. Air Force Senior Airman Matthew Neale, 20th Equipment

Aluminum City Terrace, New Kensington, Pennsylvania. Town house 33

Bevatron coil end-winding support structure upper coil box. Support beam overload and testing. Photograph taken April 8, 1957. Bevatron-1290

HYDROCARBON - LOX LIQUID OXYGEN ALUMINUM INJECTOR NO. 250

Topics

california los angeles county burbank safety film negatives burbank los angeles county calif production aircraft aluminum x ray film holder test laboratory test laboratory western plant western aircraft plant figures film beam x ray beam number future identification future identification part united states history library of congress