visibility Similar

CAPE CANAVERAL, Fla. - The second set of two Ogive panels for the Orion Launch Abort System have arrived at the Launch Abort System Facility, or LASF, at NASA’s Kennedy Space Center in Florida. The Ogive panels are being uncrated for storage inside the LASF. During processing, the panels will be secured around the Orion crew module and attached to the Launch Abort System. Orion is the exploration spacecraft designed to carry astronauts to destinations not yet explored by humans, including an asteroid and Mars. It will have emergency abort capability, sustain the crew during space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on NASA’s Space Launch System rocket. For more information, visit www.nasa.gov/orion. Photo credit: Kim Shiflett KSC-2014-2232

KENNEDY SPACE CENTER, FLA. - On Launch Pad 17-B at Cape Canaveral Air Force Station, Boeing workers check the progress of the fairing as it is moved into place for installation around the MESSENGER (Mercury Surface, Space Environment, Geochemistry and Ranging) spacecraft. The fairing is a molded structure that fits flush with the outside surface of the upper stage booster and forms an aerodynamically smooth joint, protecting the spacecraft during launch. MESSENGER is scheduled to launch Aug. 2 aboard a Boeing Delta II rocket and is expected to enter Mercury orbit in March 2011. MESSENGER was built for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md. KSC-04pd1571

KENNEDY SPACE CENTER, FLA. - In the Space Station Processing Facility, the S3/S4 integrated truss structure (background, right) rests on a work stand. It was moved from a rotation stand at left. Along with a third set of solar arrays and batteries, the truss is scheduled to fly on mission STS-117 aboard Space Shuttle Atlantis to the International Space Station. The crew of six astronauts will install the truss to continue assembly of the station. Photo credit: NASA/Dimitri Gerondidakis KSC-06pd2231

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Columbus Laboratory module is lifted for its transfer to a payload canister. The canister will transport the module and other payloads to Launch Pad 39A in preparation for its journey to the International Space Station. The European Space Agency 's largest single contribution to the International Space Station, Columbus will expand the research facilities of the station, providing crew members and scientists around the world the ability to conduct a variety of life, physical and materials science experiments. The module is approximately 23 feet long and 15 feet wide, allowing it to hold 10 large racks of experiments. The module is scheduled to be transferred to Launch Pad 39A in early November, in preparation for its journey to the station. Columbus will fly aboard space shuttle Atlantis on the STS-122 mission, targeted for launch Dec. 6. Photo credit: NASA/George Shelton KSC-07pd3027

STS086-369-020 - STS-086 - Survey views of the Mir space station

CAPE CANAVERAL, Fla. - In the Payload Changeout Room, or PCR, on Launch Pad 39A at NASA's Kennedy Space Center in Florida, space shuttle Endeavour's STS-126 mission payload is transferred from the payload canister into the PCR. Seen here is the Multi-Purpose Logistics Module Leonardo. The payload later will be installed in Endeavour's payload bay. Endeavour is targeted for launch on Nov. 14. Photo credit: NASA/Kim Shiflett KSC-08pd3327

KENNEDY SPACE CENTER, FLA. - In NASA Kennedy Space Center's Space Station Processing Facility (SSPF), the overhead crane lifts the multi-purpose logistics module Donatello from its work stand to move it to a payload canister. Donatello is being transferred to the Operations and Checkout Building to make room in the SSPF for the arrival of elements for future flights from other ISS partners. Photo credit: NASA/Jim Grossmann KSC-06pd0529

KENNEDY SPACE CENTER, FLA. -- The U.S. laboratory module, an element of the International Space Station, is lifted by a crane from its canister in the Space Station Processing Facility. The lab will undergo pre-launch preparations before its launch aboard the Shuttle Endeavour on mission STS-98. The laboratory comprises three cylindrical sections with two end cones. Each end-cone contains a hatch opening for entering and exiting the lab. The lab will provide a shirtsleeve environment for research in the areas of life science, microgravity science, Earth science and space science. Designated Flight 5A, this mission is targeted for launch in early 2000 KSC-98pc1709

Dual Ion Spectrometer (DIS) engineering test unit

code Related

OA-7 Service Module move into SSPF Highbay

OA-7 Service Module move into SSPF Highbay

OA-7 Service Module Lift to Stand

OA-7 Service Module Lift to Stand

OA-7 Service Module Lift to Stand

OA-7 Service Module Lift to Stand

OA-7 Service Module Lift to Stand

OA-7 Service Module Arrival. NASA public domain image. Kennedy space center.

OA-7 Cargo Module Move from Airlock to Highbay

OA-7 Service Module move into SSPF Highbay

description

Summary

Inside the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, engineers and technicians placed the Orbital ATK OA-7 Cygnus spacecraft's service module on a test stand. Scheduled to launch on March 19, 2017, the Orbital ATK OA-7 mission will lift off atop a United Launch Alliance Atlas V rocket from Space launch Complex 41 at Cape Canaveral Air Force Station. The commercial resupply services mission to the International Space Station will deliver thousands of pounds of supplies, equipment and scientific research materials that improve life on Earth and drive progress toward future space exploration.

Nothing Found.

label_outline

Tags

international space station commercial resupply services crs orbital atk nasa ben smegelsky kennedy space center oa module move service module move sspf highbay high resolution nasa
date_range

Date

02/02/2017
place

Location

create

Source

NASA
link

Link

https://images.nasa.gov/
copyright

Copyright info

Public Domain Dedication (CC0)

label_outline Explore Highbay, Commercial Resupply Services Crs, Nasa Ben Smegelsky

U.S. Air Force AIRMAN 1ST Class Christopher Redmond, from the 355th Aircraft Maintenance Squadron, performs swaying to a Guided Bomb Unit 12 (GBU-12) Paveway II laer-guided weapon on an A/OA-10 Thunderbolt II aircraft during the Load Crew of the Quarter competition at Davis-Monthan Air Force Base, Ariz., on Jan. 10, 2005. (USAF PHOTO by AIRMAN 1ST Class Christina D. Kinsey) (Released)

STS094-346-025 - STS-094 - ASTRO-PGBA - Still and Thomas move locker to Spacelab

KENNEDY SPACE CENTER, FLA. -- Boeing technicians move a piece of hardware into position on Node 1 of the International Space Station (ISS) in KSC's Space Station Processing Facility in preparation for mating with Pressurized Mating Adapter (PMA)-2. The node is the first element of the ISS to be manufactured in the United States and is currently scheduled to lift off aboard the Space Shuttle Endeavour on STS-88 later this year, along with PMAs 1 and 2. The 18-foot-in-diameter, 22-foot-long aluminum module was manufactured by the Boeing Co. at Marshall Space Flight Center. Once in space, Node 1 will function as a connecting passageway to the living and working areas of the ISS. It has six hatches that will serve as docking ports to the U.S. laboratory module, U.S. habitation module, an airlock and other space station elements KSC-98pc539

NASA's Lunar Reconnaissance Orbiter (LRO) spacecraft MOVE TO VIBE CHAMBER

KENNEDY SPACE CENTER, Fla. -- Workers in the payload changeout room on Launch Pad 39A keep watch as they move the Multi-Purpose Logistics Module Leonardo out of the payload canister. The MPLM is the primary payload on mission STS-105 to the International Space Station. The mission includes a crew changeover on the Space Station. Expedition Three will be traveling on Discovery to replace Expedition Two, who will return to Earth on board Discovery. Launch of STS-105 is scheduled for Aug. 9 KSC-01pp1392

OA-7 Transport from PHSF to VIF at Pad 41

KENNEDY SPACE CENTER, FLA. -- At the KSC Shuttle Landing Facility, the Joint Airlock Module, the gateway from which crew members aboard the International Space Station (ISS) will enter and exit the 470-ton orbiting research facility, is settled onto a flatbed trailer for transport to the Operations and Checkout Building in the KSC industrial area. There it will undergo vacuum chamber testing. It will then be moved to the Space Station Processing Facility (SSPF) for further prelaunch preparation and checkout. The massive, spindle-shaped airlock is 20 feet long, has a diameter of 13 feet at its widest point, and weighs six and a half tons. It was manufactured at NASA's Marshall Space Flight Center by the Huntsville division of The Boeing Company. The Space Shuttle Atlantis will carry the airlock to orbit on mission STS-104, the tenth International Space Station flight, currently targeted for liftoff in May 2001 KSC00pp1348

STS106-319-017 - STS-106 - Wilcutt and Malenchenko move through an FGB hatch during STS-106

VAB Platform K(2) Lift & Install into Highbay 3

KENNEDY SPACE CENTER, FLA. - STS-115 crew members take another look at an M-113 armored personnel carrier that could be used to move quickly away from the launch pad in the event of an emergency. From left are Commander Brent Jett, Pilot Chris Ferguson and Mission Specialists Heidemarie Stefanyshyn-Piper and Joseph Tanner. In the foreground are Mission Specialists Daniel Burbank and Steven MacLean, who is with the Canadian Space Agency. The mission crew is at KSC for Terminal Countdown Demonstration Test (TCDT) activities that are preparation for launch on Space Shuttle Atlantis, scheduled to take place in a window that opens Aug. 27. During their 11-day mission to the International Space Station, the STS-115 crew will continue construction of the station and attach the payload elements, the Port 3/4 truss segment with its two large solar arrays. Photo credit: NASA/Cory Huston KSC-06pd1792

Orion Service Module Umbilical (OSMU) Testing Complete

Members of the 35th Fighter Squadron, 8th Fighter Wing, Kunsan Air Base, Republic of Korea, move an MHU141 munitions trailer into position for uploading AIM-120 Air to Air missiles. Personnel at Kunsan Air Base are participating in an Beverly Bearcat Operational Readiness Inspection

Topics

international space station commercial resupply services crs orbital atk nasa ben smegelsky kennedy space center oa module move service module move sspf highbay high resolution nasa